lkml.org 
[lkml]   [2011]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] rtc: disable the alarm in the hardware
Date
From: Rabin Vincent <rabin.vincent@stericsson.com>

Currently, the RTC code does not disable the alarm in the hardware.

This means that after a sequence such as the one below (the files are in the
RTC sysfs), the box will boot up after 2 minutes even though we've
asked for the alarm to be turned off.

# echo $((`cat since_epoch`)+120) > wakealarm
# echo 0 > wakealarm
# poweroff

Fix this by disabling the alarm when there are no timers to run.

Cc: stable@kernel.org
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
---
drivers/rtc/interface.c | 44 ++++++++++++++++++++++++++++++++++----------
1 files changed, 34 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 8e28625..fa4d9f3 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -319,6 +319,20 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);

+static int ___rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+ int err;
+
+ if (!rtc->ops)
+ err = -ENODEV;
+ else if (!rtc->ops->set_alarm)
+ err = -EINVAL;
+ else
+ err = rtc->ops->set_alarm(rtc->dev.parent, alarm);
+
+ return err;
+}
+
static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
struct rtc_time tm;
@@ -342,14 +356,7 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
* over right here, before we set the alarm.
*/

- if (!rtc->ops)
- err = -ENODEV;
- else if (!rtc->ops->set_alarm)
- err = -EINVAL;
- else
- err = rtc->ops->set_alarm(rtc->dev.parent, alarm);
-
- return err;
+ return ___rtc_set_alarm(rtc, alarm);
}

int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
@@ -763,6 +770,20 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
return 0;
}

+static void rtc_alarm_disable(struct rtc_device *rtc)
+{
+ struct rtc_wkalrm alarm;
+ struct rtc_time tm;
+
+ __rtc_read_time(rtc, &tm);
+
+ alarm.time = rtc_ktime_to_tm(ktime_add(rtc_tm_to_ktime(tm),
+ ktime_set(300, 0)));
+ alarm.enabled = 0;
+
+ ___rtc_set_alarm(rtc, &alarm);
+}
+
/**
* rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue
* @rtc rtc device
@@ -784,8 +805,10 @@ static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer)
struct rtc_wkalrm alarm;
int err;
next = timerqueue_getnext(&rtc->timerqueue);
- if (!next)
+ if (!next) {
+ rtc_alarm_disable(rtc);
return;
+ }
alarm.time = rtc_ktime_to_tm(next->expires);
alarm.enabled = 1;
err = __rtc_set_alarm(rtc, &alarm);
@@ -847,7 +870,8 @@ again:
err = __rtc_set_alarm(rtc, &alarm);
if (err == -ETIME)
goto again;
- }
+ } else
+ rtc_alarm_disable(rtc);

mutex_unlock(&rtc->ops_lock);
}
--
1.7.3.2


\
 
 \ /
  Last update: 2011-11-22 11:05    [W:0.050 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site