lkml.org 
[lkml]   [2011]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] PM/Hibernation: Fix the early termination of test modes
Date
Commit 2aede851ddf08666f68ffc17be446420e9d2a056
(PM / Hibernate: Freeze kernel threads after preallocating memory)
postponed the freezing of kernel threads to after preallocating memory
for hibernation. But while doing that, the hibernation test TEST_FREEZER
and the test mode HIBERNATION_TESTPROC were not moved accordingly.

As a result, when using these test modes, it only goes upto the freezing of
userspace and exits, when in fact it should go till the complete end of task
freezing stage, namely the freezing of kernel threads as well.

So, move these points of exit to appropriate places so that freezing of
kernel threads is also tested while using these test harnesses. And while at
it, add some documentation about these test modes.

v2: Changed 'freezer_test_done' flag from int to bool.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
---

Documentation/power/basic-pm-debugging.txt | 16 ++++++++++++----
kernel/power/hibernate.c | 28 ++++++++++++++++++++++------
2 files changed, 34 insertions(+), 10 deletions(-)

diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index 40a4c65..ba6c879 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -38,10 +38,18 @@ identify what goes wrong.

a) Test modes of hibernation

-To find out why hibernation fails on your system, you can use a special testing
-facility available if the kernel is compiled with CONFIG_PM_DEBUG set. Then,
-there is the file /sys/power/pm_test that can be used to make the hibernation
-core run in a test mode. There are 5 test modes available:
+To find out why hibernation fails on your system, you can use some special
+testing facilities available if the kernel is compiled with CONFIG_PM_DEBUG set.
+Hibernation will then have 2 more modes that can be used, namely "testproc" and
+"test". When the "testproc" mode is used, it executes everything upto the task
+freezing phase and reverts back. When the "test" mode is used, it goes much
+deeper down, stopping just short of actually hibernating the machine, and then
+reverts back to normal state.
+
+However, there is an even more fine-grained debugging tool, also enabled by
+setting CONFIG_PM_DEBUG: there appears a file /sys/power/pm_test that can be
+used to make the hibernation core run in a test mode.
+There are 5 test modes available:

freezer
- test the freezing of processes
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index b4511b6..257e8e7 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -55,6 +55,8 @@ enum {

static int hibernation_mode = HIBERNATION_SHUTDOWN;

+static bool freezer_test_done;
+
static const struct platform_hibernation_ops *hibernation_ops;

/**
@@ -347,6 +349,17 @@ int hibernation_snapshot(int platform_mode)
if (error)
goto Close;

+ if (hibernation_test(TEST_FREEZER) ||
+ hibernation_testmode(HIBERNATION_TESTPROC)) {
+
+ /*
+ * Indicate to the caller that we are returning due to a
+ * successful freezer test.
+ */
+ freezer_test_done = true;
+ goto Close;
+ }
+
error = dpm_prepare(PMSG_FREEZE);
if (error)
goto Complete_devices;
@@ -641,15 +654,13 @@ int hibernate(void)
if (error)
goto Finish;

- if (hibernation_test(TEST_FREEZER))
- goto Thaw;
-
- if (hibernation_testmode(HIBERNATION_TESTPROC))
- goto Thaw;
-
error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
if (error)
goto Thaw;
+ if (freezer_test_done) {
+ freezer_test_done = false;
+ goto Thaw;
+ }

if (in_suspend) {
unsigned int flags = 0;
@@ -864,6 +875,11 @@ static const char * const hibernation_modes[] = {
*
* If a platform hibernation driver is in use, 'platform' will be supported
* and will be used by default. Otherwise, 'shutdown' will be used by default.
+ * The 2 test modes are useful only when CONFIG_PM_DEBUG is set. In that case,
+ * using the 'testproc' mode will do everything upto the freezing of tasks
+ * and exits after undoing all that it did. The 'test' mode is deeper, in that,
+ * it does everything except actually hibernating the machine and exits after
+ * restoring the machine back to its original state.
* The selected option (i.e. the one corresponding to the current value of
* hibernation_mode) is enclosed by a square bracket.
*


\
 
 \ /
  Last update: 2011-11-18 04:19    [W:0.082 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site