Messages in this thread | | | Date | Sun, 13 Nov 2011 18:47:53 +0000 | Subject | Re: PROBLEM: Radeon display connector : No monitor connected or invalid EDID | From | Dave Airlie <> |
| |
cc Alex.
> Since installing kernel-3.1.1 the screen goes blank during the boot and I am > unable to do anything, not even ssh into the box. > ​ > linux-3.1.0 worked ok. There are no other changes to the system. Both were > built using the same config file. > ​ > When I reboot into 3.1.0 and check the log messages, I see > ​ > Nov 13 14:31:22 Edge-64 kernel: [ 0.055378] CPU0: AMD A6-3400M APU with > Radeon(tm) HD Graphics stepping 00 > ​ > # grep '\[drm\]' messages |cut -d: -f4- > [ 0.645028] [drm] Initialized drm 1.1.0 20060810 > [ 14.128321] [drm] radeon defaulting to kernel modesetting. > [ 14.128391] [drm] radeon kernel modesetting enabled. > [ 14.129217] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 > 0x17AA:0x21EA). > [ 14.129410] [drm] register mmio base: 0xF0B00000 > [ 14.129476] [drm] register mmio size: 262144 > [ 14.130388] [drm] Detected VRAM RAM=512M, BAR=256M > [ 14.130459] [drm] RAM width 32bits DDR > [ 14.130848] [drm] radeon: 512M of VRAM memory ready > [ 14.130912] [drm] radeon: 512M of GTT memory ready. > [ 14.131021] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 14.131085] [drm] Driver supports precise vblank timestamp query. > [ 14.131281] [drm] radeon: irq initialized. > [ 14.131347] [drm] GART: num cpu pages 131072, num gpu pages 131072 > [ 14.132538] [drm] Loading SUMO Microcode > [ 14.547990] [drm] ring test succeeded in 1 usecs > [ 14.548128] [drm] radeon: ib pool ready. > [ 14.548249] [drm] ib test succeeded in 0 usecs > [ 14.551990] [drm] Radeon Display Connectors > [ 14.552056] [drm] Connector 0: > [ 14.552119] [drm] VGA > [ 14.552179] [drm] HPD2 > [ 14.552242] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 > 0x644c 0x644c > [ 14.552336] [drm] Encoders: > [ 14.552397] [drm] CRT1: INTERNAL_UNIPHY2 > [ 14.552473] [drm] CRT1: NUTMEG > [ 14.552535] [drm] Connector 1: > [ 14.552596] [drm] LVDS > [ 14.552657] [drm] HPD1 > [ 14.552718] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 > 0x643c 0x643c > [ 14.552809] [drm] Encoders: > [ 14.552870] [drm] LCD1: INTERNAL_UNIPHY2 > [ 14.552932] [drm] LCD1: TRAVIS > [ 14.552994] [drm] Connector 2: > [ 14.553055] [drm] HDMI-A > [ 14.553115] [drm] HPD3 > [ 14.553176] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 > 0x645c 0x645c > [ 14.553266] [drm] Encoders: > [ 14.553327] [drm] DFP1: INTERNAL_UNIPHY > [ 14.952397] [drm] Radeon display connector VGA-1: No monitor connected or > invalid EDID > [ 15.352332] [drm] Radeon display connector LVDS-1: No monitor connected or > invalid EDID > [ 15.752357] [drm] Radeon display connector HDMI-A-1: No monitor connected > or invalid EDID > [ 15.779878] [drm] Internal thermal controller without fan control > [ 15.780236] [drm] radeon: power management initialized > [ 16.014394] [drm] fb mappable at 0xE0141000 > [ 16.014506] [drm] vram apper at 0xE0000000 > [ 16.014568] [drm] size 4325376 > [ 16.014629] [drm] fb depth is 24 > [ 16.014690] [drm] pitch is 5632 > [ 16.111788] [drm] Initialized radeon 2.11.0 20080528 for 0000:00:01.0 on > minor 0 > ​ > at this point the log ends. > ​ > ​ > I also see > ​ > [ 13.411889] thinkpad_acpi: Lenovo ThinkPad E525, model 12002JG > [ 14.129616] ATOM BIOS: Lenovo > ​ > Those messages did not appear in 3.1.0 > I am not sure of the meaning of ATOM, but I have an AMD system, not Intel. > ​ > ​ > Keywords:graphics drm radeon Lenovo > ​ > The following data is from the running linux-3.1.0 > $ lspci -vvv > ​ > ​ > 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root > Complex > Subsystem: Lenovo Device 21ea > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64 > ​ > 00:01.0 VGA compatible controller: ATI Technologies Inc Device 9647 (prog-if > 00 [VGA controller]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] > Region 1: I/O ports at 4000 [size=256] > Region 2: Memory at f0b00000 (32-bit, non-prefetchable) [size=256K] > Expansion ROM at <unassigned> [disabled] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI > 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <4us, L1 > unlimited > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM > unknown, Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- > SlotClk- DLActive- > BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel modules: radeon > ​ > 00:01.1 Audio device: ATI Technologies Inc Device 1714 > Subsystem: Lenovo Device 21ea > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 46 > Region 0: Memory at f0b44000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI > 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <4us, L1 > unlimited > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM > unknown, Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- > SlotClk- DLActive- > BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4181 > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel driver in use: snd_hda_intel > ​ > 00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root > Port (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- > HotPlug- Surprise- > Slot #4, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- > CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- > ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis+, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4141 > Capabilities: [b0] Subsystem: Lenovo Device 21ea > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel driver in use: pcieport > ​ > 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller > [AHCI mode] (prog-if 01 [AHCI 1.0]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 45 > Region 0: I/O ports at 4118 [size=8] > Region 1: I/O ports at 4124 [size=4] > Region 2: I/O ports at 4110 [size=8] > Region 3: I/O ports at 4120 [size=4] > Region 4: I/O ports at 4100 [size=16] > Region 5: Memory at f0b4b000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [50] MSI: Enable+ Count=1/16 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4171 > Capabilities: [70] SATA HBA v1.0 InCfgSpace > Kernel driver in use: ahci > ​ > 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI > Controller (rev 11) (prog-if 10 [OHCI]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f0b4a000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > ​ > 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI > Controller (rev 11) (prog-if 20 [EHCI]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f0b4bb00 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > ​ > 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI > Controller (rev 11) (prog-if 10 [OHCI]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f0b49000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > ​ > 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI > Controller (rev 11) (prog-if 20 [EHCI]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f0b4ba00 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > ​ > 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) > Subsystem: Lenovo Device 21ea > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller > (rev 01) > Subsystem: Lenovo Device 21ea > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0b40000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: snd_hda_intel > ​ > 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > ​ > 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > ​ > 00:14.7 SD Host controller: Advanced Micro Devices [AMD] Hudson SD Flash > Controller (prog-if 01) > Subsystem: Lenovo Device 21ea > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 71, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0b4b900 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Kernel driver in use: sdhci-pci > Kernel modules: sdhci-pci > ​ > 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 (prog-if 00 > [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #247, Speed 5GT/s, Width x1, ASPM L0s L1, > Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- > Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x16, TrErr- Train- > SlotClk+ DLActive- > BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- > ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4149 > Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device 0000 > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel driver in use: pcieport > ​ > 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f0a00000-f0afffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, > Latency L0 <64ns, > L1 <1us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- > ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4151 > Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device 0000 > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel driver in use: pcieport > ​ > 00:15.2 PCI bridge: Advanced Micro Devices [AMD] Device 43a2 (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: f0900000-f09fffff > Prefetchable memory behind bridge: 00000000f0c00000-00000000f0dfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, > Latency L0 <64ns, > L1 <1us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- > Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- > HotPlug+ Surprise- > Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- > CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > PresDet+ Interlock- > Changed: MRL- PresDet- LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- > ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4159 > Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device 0000 > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel driver in use: pcieport > ​ > 00:15.3 PCI bridge: Advanced Micro Devices [AMD] Device 43a3 (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: f0500000-f08fffff > Prefetchable memory behind bridge: 00000000f0100000-00000000f04fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #247, Speed 5GT/s, Width x1, ASPM L0s L1, > Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- > Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x16, TrErr- Train- > SlotClk+ DLActive- > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- > HotPlug+ Surprise- > Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- > CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- > ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4161 > Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device 0000 > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 > <?> > Kernel driver in use: pcieport > ​ > 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI > Controller (rev 11) (prog-if 10 [OHCI]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f0b48000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > ​ > 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI > Controller (rev 11) (prog-if 20 [EHCI]) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f0b4b800 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > ​ > 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 0 (rev 43) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 1 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 2 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 3 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [f0] Secure device <?> > Kernel driver in use: k10temp > ​ > 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 4 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 6 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 5 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor > Function 7 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > ​ > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI > Express Gigabit Ethernet controller (rev 06) > Subsystem: Lenovo Device 21ea > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 47 > Region 0: I/O ports at 3000 [size=256] > Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4189 > Capabilities: [70] Express (v2) Endpoint, MSI 01 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ > AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 > <512ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- > BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [b0] MSI-X: Enable- Count=4 Masked- > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [d0] Vital Product Data > Unknown small resource type 00, will not decode more. > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- > MalfTLP- ECRC- UnsupReq+ ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- > UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr- > AERCap: First Error Pointer: 14, GenCap+ CGenEn- > ChkCap+ ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 3a-0b-00-00-68-4c-e0-00 > Kernel driver in use: r8169 > Kernel modules: r8169 > ​ > 04:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 04) (prog-if 01) > Subsystem: Lenovo Device 21ea > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at f0a00200 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > unlimited, L1 > unlimited > ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ > AuxPwr- TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <4us, > L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- > Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [800 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- > UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- > ChkCap+ ChkEn- > Kernel driver in use: sdhci-pci > Kernel modules: sdhci-pci > ​ > 05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE > 802.11b/g/n WiFi Adapter (rev 01) > Subsystem: Realtek Semiconductor Co., Ltd. Device 8195 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at 2000 [size=256] > Region 2: Memory at f0900000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 > <512ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- > Retrain- CommClk+ > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- > BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+ > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- > UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- > ChkCap+ ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 01-91-81-fe-ff-4c-e0-00 > Kernel driver in use: rtl8192ce > Kernel modules: rtl8192ce > ​ > ​ > ​ > ​ > ​ > $ lsmod > Module Size Used by > rtl8192ce 69655 0 > rtl8192c_common 54535 1 rtl8192ce > cfbcopyarea 3217 0 > ohci_hcd 20690 0 > sdhci_pci 8440 0 > rtlwifi 87860 1 rtl8192ce > sdhci 21347 1 sdhci_pci > cfbimgblt 1969 0 > mmc_core 67307 1 sdhci > r8169 43238 0 > cfbfillrect 3581 0 > processor 22993 4 > mii 3707 1 r8169 > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |