Messages in this thread | | | Date | Mon, 31 Oct 2011 21:54:28 -0700 | From | illdred <> | Subject | Re: [dm-devel] Block regression since 3.1-rc3 |
| |
On Sat, 08 Oct 2011 14:05:05 +0200 Christophe Saout <christophe@saout.de> wrote:
> Hi Shaohua, > > > >> Line 323 is this one: BUG_ON(!rq->bio || rq->bio != rq->biotail); > > > > > > OK, it turns out my testing was incomplete. I only tested targets that > > > had a write-through cache, so I didn't hit this problem. It reproduces > > > pretty easily with just multipath involved (no linear target on top) when > > > running against the right storage. > > > > > > So, here's a patch, but I don't have a full explanation for it just yet. > > > What I observed was that, on fsync, blkdev_issue_flush was called. > > > Eventually, the flush request gets cloned, and blk_insert_cloned_request > > > is called. This cloned request never actually gets issued to the > > > q->requst_fn (scsi_request_fn in my case). So, it may be that there is > > > no plug list for this, so the queue isn't goosed? I'll try to come up > > > with a better explanation, or Tejun may just know off the top of his > > > head what's going on. > > > > > > So, the patch works for me, but is very much just an RFC. > > [...] > > Looks the dm request based flush logic is broken. > > > > saved_make_request_fn > > __make_request > > blk_insert_flush > > but blk_insert_flush doesn't put the original request to list, instead, the > > q->flush_rq is in list. > > then > > dm_request_fn > > blk_peek_request > > dm_prep_fn > > clone_rq > > map_request > > blk_insert_cloned_request > > so q->flush_rq is cloned, and get dispatched. but we can't clone q->flush_rq > > and use it to do flush. map_request even could assign a different blockdev to > > the cloned request. > > > > Clone q->flush_rq is absolutely wrong. we can clear ogirinal request's flush bit > > and set cloned request flush bit, so we can skip the blk_insert_flush logic for > > original request. > > > > can you please try this patch. Only compilation tested. > > Now I get a different BUG when doing what triggered the original BUG > (e.g. unmounting the filesystem): > > ------------[ cut here ]------------ > kernel BUG at drivers/scsi/scsi_lib.c:1152! > invalid opcode: 0000 [#1] PREEMPT SMP > CPU 7 > Modules linked in: xenfs gfs2 fuse dlm configfs dummy bonding xt_TPROXY nf_tproxy_core xt_socket xt_owner xt_connmark iptable_mangle ipt_MASQUERADE iptable_nat ipt_ULOG ipt_REJECT xt_mark iptable_filter iptable_raw ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state xt_tcpudp xt_physdev xt_hashlimit xt_multiport ip6table_filter ip6_tables ebt_redirect ebt_ip ebt_mark_m ebtable_broute bridge stp llc ebtable_nat ext4 jbd2 dm_round_robin dm_multipath ebtable_filter ebtables x_tables nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_h323 nf_conntrack_h323 nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack xen_netback xen_blkback xen_gntdev ipmi_si ipmi_devintf ipmi_msghandler loop ohci_hcd ehci_hcd e1000e tpm_tis igb qla2xxx tpm tpm_bios scsi_transport_fc pata_atiixp i2c_piix4 > > Pid: 5056, comm: kworker/7:2 Not tainted 3.1.0-rc8 #1 Supermicro H8DG6/H8DGi/H8DG6/H8DGi > RIP: e030:[<ffffffff812f7eae>] [<ffffffff812f7eae>] scsi_setup_fs_cmnd+0x9e/0xe0 > RSP: e02b:ffff88009b299b70 EFLAGS: 00010046 > RAX: 0000000000000000 RBX: ffff88009b9cc018 RCX: 0000000000000000 > RDX: ffff88009f193c00 RSI: ffff88009b9cc018 RDI: ffff88009b905800 > RBP: ffff88009b299b80 R08: 0000000000000000 R09: 0000000000000001 > R10: 0000000000000001 R11: ffff8800a0e40700 R12: ffff88009b905800 > R13: 0000000000000001 R14: ffff88009b905800 R15: 0000000000000000 > FS: 00007fc76ab77700(0000) GS:ffff8800d767f000(0000) knlGS:0000000000000000 > CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00007fc76a1d0beb CR3: 0000000001805000 CR4: 0000000000000660 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process kworker/7:2 (pid: 5056, threadinfo ffff88009b298000, task ffff88009ed68000) > Stack: > ffff88009b9cc018 ffff88009e5f1a60 ffff88009b299bf0 ffffffff8130675f > ffff88009b299ba0 ffffffff810ceef0 ffff88009f193c00 ffffffff00000000 > ffffffff8100ab6d ffff88009b299c60 ffff88009ed68000 ffff88009b9cc018 > Call Trace: > [<ffffffff8130675f>] sd_prep_fn+0x14f/0xa70 > [<ffffffff810ceef0>] ? mempool_alloc_slab+0x10/0x20 > [<ffffffff8100ab6d>] ? xen_force_evtchn_callback+0xd/0x10 > [<ffffffff81215db2>] blk_peek_request+0xd2/0x270 > [<ffffffff812f8aeb>] scsi_request_fn+0x4b/0x3c0 > [<ffffffff8120fa46>] __blk_run_queue+0x16/0x20 > [<ffffffff8120ef03>] __elv_add_request+0xb3/0x270 > [<ffffffff81213494>] add_acct_request+0x34/0x40 > [<ffffffff8121350b>] blk_insert_cloned_request+0x6b/0x90 > [<ffffffff8138c049>] dm_dispatch_request+0x39/0x70 > [<ffffffff8138db9c>] dm_request_fn+0x17c/0x280 > [<ffffffff8100b322>] ? check_events+0x12/0x20 > [<ffffffff81222db0>] ? cfq_init_queue+0x430/0x430 > [<ffffffff8120fa46>] __blk_run_queue+0x16/0x20 > [<ffffffff81222de4>] cfq_kick_queue+0x34/0x50 > [<ffffffff8106e039>] process_one_work+0x129/0x4a0 > [<ffffffff81070401>] worker_thread+0x161/0x340 > [<ffffffff810702a0>] ? manage_workers.clone.22+0x230/0x230 > [<ffffffff81074d36>] kthread+0x96/0xa0 > [<ffffffff814cb7b4>] kernel_thread_helper+0x4/0x10 > [<ffffffff814c9873>] ? int_ret_from_sys_call+0x7/0x1b > [<ffffffff814c2dc0>] ? retint_restore_args+0x5/0x6 > [<ffffffff814cb7b0>] ? gs_change+0x13/0x13 > Code: ff 5b 41 5c c9 c3 0f 1f 80 00 00 00 00 4c 89 e7 be 20 00 00 00 e8 a3 a2 ff ff 48 85 c0 48 89 c7 74 36 48 89 83 e0 00 00 00 eb 9b <0f> 0b 48 8b 00 48 85 c0 0f 84 77 ff ff ff 48 8b 40 50 48 85 c0 > RIP [<ffffffff812f7eae>] scsi_setup_fs_cmnd+0x9e/0xe0 > RSP <ffff88009b299b70> > ---[ end trace 35f29bc1fdb897a6 ]--- > note: kworker/7:2[5056] exited with preempt_count 1 > > (followed by an oops and the machine is dead in an instant) > > Christophe > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > Hi!
I have experienced this "kernel BUG at drivers/scsi/scsi_lib.c:1152!" too!
linux-3.1-rc3 fails to boot on my computer. Lots of error messages get printed to the console, one of which is: note: md0_raid [255] exited with preempt_count 1
and some of the error messages mention something about scsi before scrolling past. then the system stops doing anything.
I've managed to take screen shots of all the details:
http://www.flickr.com/photos/illdred/sets/72157627863015429/
there are 5 images.
the root filesystem is on an mdadm raid partition and normally works.
I have these relevant kernel options in the grub boot configuration: root=/dev/md0 rootfstype=ext4 md=0,/dev/sda7,/dev/sdc8 raid=noautodetect
downgrading to the linux-3.0.7-1 package lets the system boot again.
I'm running Archlinux, btw.
thanks,
Fraser 'illdred' DeLisle
p.s. please cc illdred@gmail.com as I am not a list subscriber
| |