lkml.org 
[lkml]   [2011]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 1/5 v13] arm: omap: usb: ehci and ohci hwmod structures for omap4
    From
    On Fri, Oct 7, 2011 at 2:36 PM, Paul Walmsley <paul@pwsan.com> wrote:
    > Hi
    >
    > On Thu, 6 Oct 2011, Keshava Munegowda wrote:
    >
    >> From: Benoit Cousson <b-cousson@ti.com>
    >>
    >> Following 2 hwmod structures are added
    >> 1. usb_host_hs
    >>      The hwmod of usbhs with uhh, ehci and ohci base addresses
    >>      functional clock and ehci, ohci irqs
    >>
    >> 2. usb_tll_hs
    >>       hwmod of usbhs with the TLL base address and irq.
    >>
    >> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
    >>
    >> - rebased to kernel version 3.0
    >> - Workarounds for hardware issues
    >>
    >> Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
    >> Reviewed-by: Partha Basak <parthab@india.ti.com>
    >
    > A few minor issues in this patch have been fixed.  Please be careful with
    > whitespace and with multi-line comment style - see
    > Documentation/CodingStyle for more information.

    Thanks Paul;
    yes, I can your changes in the patches.
    so, you don't need v14 from me right? please confirm.
    I am preparing/validating next version patches with OCPIF_SWSUP_IDLE removed.
    Thanks for guiding me and helping on the finalizing the hwmod configurations.


    regards
    keshava

    >
    >
    > - Paul
    >
    > From fdf7c66244af5ca5ba4cdc820f7644efb9f6c1bf Mon Sep 17 00:00:00 2001
    > From: Benoit Cousson <b-cousson@ti.com>
    > Date: Fri, 7 Oct 2011 02:40:51 -0600
    > Subject: [PATCH] arm: omap: usb: ehci and ohci hwmod structures for omap4
    >
    > Following 2 hwmod structures are added
    > 1. usb_host_hs
    >     The hwmod of usbhs with uhh, ehci and ohci base addresses
    >     functional clock and ehci, ohci irqs
    >
    > 2. usb_tll_hs
    >      hwmod of usbhs with the TLL base address and irq.
    >
    > Signed-off-by: Benoit Cousson <b-cousson@ti.com>
    >
    > - rebased to kernel version 3.0
    > - Workarounds for hardware issues
    >
    > Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
    > Reviewed-by: Partha Basak <parthab@india.ti.com>
    > [paul@pwsan.com: fixed whitespace, fixed multi-line comment style]
    > Signed-off-by: Paul Walmsley <paul@pwsan.com>
    > ---
    >  arch/arm/mach-omap2/omap_hwmod_44xx_data.c |  206 +++++++++++++++++++++++++++-
    >  1 files changed, 205 insertions(+), 1 deletions(-)
    >
    > diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
    > index caaf409..6149407 100644
    > --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
    > +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
    > @@ -68,6 +68,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod;
    >  static struct omap_hwmod omap44xx_mpu_hwmod;
    >  static struct omap_hwmod omap44xx_mpu_private_hwmod;
    >  static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
    > +static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
    > +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
    >
    >  /*
    >  * Interconnects omap_hwmod structures
    > @@ -5254,6 +5256,205 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
    >        .slaves_cnt     = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
    >  };
    >
    > +/*
    > + * 'usb_host_hs' class
    > + * high-speed multi-port usb host controller
    > + */
    > +static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
    > +       .master         = &omap44xx_usb_host_hs_hwmod,
    > +       .slave          = &omap44xx_l3_main_2_hwmod,
    > +       .clk            = "l3_div_ck",
    > +       .user           = OCP_USER_MPU | OCP_USER_SDMA,
    > +};
    > +
    > +static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
    > +       .rev_offs       = 0x0000,
    > +       .sysc_offs      = 0x0010,
    > +       .syss_offs      = 0x0014,
    > +       .sysc_flags     = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
    > +                          SYSC_HAS_SOFTRESET),
    > +       .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
    > +                          SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
    > +                          MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
    > +       .sysc_fields    = &omap_hwmod_sysc_type2,
    > +};
    > +
    > +static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
    > +       .name = "usb_host_hs",
    > +       .sysc = &omap44xx_usb_host_hs_sysc,
    > +};
    > +
    > +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
    > +       &omap44xx_usb_host_hs__l3_main_2,
    > +};
    > +
    > +static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
    > +       {
    > +               .name           = "uhh",
    > +               .pa_start       = 0x4a064000,
    > +               .pa_end         = 0x4a0647ff,
    > +               .flags          = ADDR_TYPE_RT
    > +       },
    > +       {
    > +               .name           = "ohci",
    > +               .pa_start       = 0x4a064800,
    > +               .pa_end         = 0x4a064bff,
    > +       },
    > +       {
    > +               .name           = "ehci",
    > +               .pa_start       = 0x4a064c00,
    > +               .pa_end         = 0x4a064fff,
    > +       },
    > +       {}
    > +};
    > +
    > +static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
    > +       { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
    > +       { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
    > +       { .irq = -1 }
    > +};
    > +
    > +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
    > +       .master         = &omap44xx_l4_cfg_hwmod,
    > +       .slave          = &omap44xx_usb_host_hs_hwmod,
    > +       .clk            = "l4_div_ck",
    > +       .addr           = omap44xx_usb_host_hs_addrs,
    > +       .user           = OCP_USER_MPU | OCP_USER_SDMA,
    > +};
    > +
    > +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
    > +       &omap44xx_l4_cfg__usb_host_hs,
    > +};
    > +
    > +static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
    > +       .name           = "usb_host_hs",
    > +       .class          = &omap44xx_usb_host_hs_hwmod_class,
    > +       .clkdm_name     = "l3_init_clkdm",
    > +       .main_clk       = "usb_host_hs_fck",
    > +       .prcm = {
    > +               .omap4 = {
    > +                       .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
    > +                       .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
    > +                       .modulemode   = MODULEMODE_SWCTRL,
    > +               },
    > +       },
    > +       .mpu_irqs       = omap44xx_usb_host_hs_irqs,
    > +       .slaves         = omap44xx_usb_host_hs_slaves,
    > +       .slaves_cnt     = ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
    > +       .masters        = omap44xx_usb_host_hs_masters,
    > +       .masters_cnt    = ARRAY_SIZE(omap44xx_usb_host_hs_masters),
    > +/*
    > + *     Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
    > + *     id: i660
    > + *
    > + *     Description:
    > + *     In the following configuration :
    > + *     - USBHOST module is set to smart-idle mode
    > + *     - PRCM asserts idle_req to the USBHOST module ( This typically happens
    > + *       when the system is going to a low power mode : all ports have been
    > + *       suspended, the master part of the USBHOST module has entered the
    > + *       standby state, and SW has cut the functional clocks.)
    > + *     - an USBHOST interrupt occurs before the module is able to answer
    > + *       idle_ack, typically a remote wakeup IRQ.
    > + *     Then the USB HOST module will enter a deadlock situation where it is no
    > + *     more accessible nor functional.
    > + *
    > + *     Workaround:
    > + *     Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
    > + */
    > +
    > +/*
    > + *     Errata: USB host EHCI may stall when entering smart-standby mode
    > + *     Id: i571
    > + *
    > + *     Description:
    > + *     When the USBHOST module is set to smart-standby mode, and when it is
    > + *     ready to enter the standby state (i.e. all ports are suspended and
    > + *     all attached devices are in suspend mode), then it can wrongly assert
    > + *     the Mstandby signal too early while there are still some residual OCP
    > + *     transactions ongoing. If this condition occurs, the internal state
    > + *     machine may go to an undefined state and the USB link may be stuck
    > + *     upon the next resume.
    > + *
    > + *     Workaround:
    > + *     Don't use smart standby; use only force standby,
    > + *     hence HWMOD_SWSUP_MSTANDBY
    > + */
    > +
    > +/*
    > + *     During system boot; If the hwmod framework resets the module
    > + *     the module will have smart idle settings; which can lead to deadlock
    > + *     (above Errata Id:i660); so, dont reset the module during boot;
    > + *     Use HWMOD_INIT_NO_RESET.
    > + */
    > +
    > +       .flags          = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
    > +                         HWMOD_INIT_NO_RESET,
    > +};
    > +
    > +/*
    > + * 'usb_tll_hs' class
    > + * usb_tll_hs module is the adapter on the usb_host_hs ports
    > + */
    > +static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
    > +       .rev_offs       = 0x0000,
    > +       .sysc_offs      = 0x0010,
    > +       .syss_offs      = 0x0014,
    > +       .sysc_flags     = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
    > +                          SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
    > +                          SYSC_HAS_AUTOIDLE),
    > +       .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
    > +       .sysc_fields    = &omap_hwmod_sysc_type1,
    > +};
    > +
    > +static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
    > +       .name = "usb_tll_hs",
    > +       .sysc = &omap44xx_usb_tll_hs_sysc,
    > +};
    > +
    > +static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
    > +       { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
    > +       { .irq = -1 }
    > +};
    > +
    > +static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
    > +       {
    > +               .name           = "tll",
    > +               .pa_start       = 0x4a062000,
    > +               .pa_end         = 0x4a063fff,
    > +               .flags          = ADDR_TYPE_RT
    > +       },
    > +       {}
    > +};
    > +
    > +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
    > +       .master         = &omap44xx_l4_cfg_hwmod,
    > +       .slave          = &omap44xx_usb_tll_hs_hwmod,
    > +       .addr           = omap44xx_usb_tll_hs_addrs,
    > +       .user           = OCP_USER_MPU | OCP_USER_SDMA,
    > +};
    > +
    > +static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
    > +       &omap44xx_l4_cfg__usb_tll_hs,
    > +};
    > +
    > +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
    > +       .name           = "usb_tll_hs",
    > +       .class          = &omap44xx_usb_tll_hs_hwmod_class,
    > +       .clkdm_name     = "l3_init_clkdm",
    > +       .main_clk       = "usb_tll_hs_ick",
    > +       .prcm = {
    > +               .omap4 = {
    > +                       .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
    > +                       .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
    > +                       .modulemode   = MODULEMODE_HWCTRL,
    > +               },
    > +       },
    > +       .mpu_irqs       = omap44xx_usb_tll_hs_irqs,
    > +       .slaves         = omap44xx_usb_tll_hs_slaves,
    > +       .slaves_cnt     = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
    > +};
    > +
    >  static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
    >
    >        /* dmm class */
    > @@ -5393,13 +5594,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
    >        &omap44xx_uart3_hwmod,
    >        &omap44xx_uart4_hwmod,
    >
    > +       /* usb host class */
    > +       &omap44xx_usb_host_hs_hwmod,
    > +       &omap44xx_usb_tll_hs_hwmod,
    > +
    >        /* usb_otg_hs class */
    >        &omap44xx_usb_otg_hs_hwmod,
    >
    >        /* wd_timer class */
    >        &omap44xx_wd_timer2_hwmod,
    >        &omap44xx_wd_timer3_hwmod,
    > -
    >        NULL,
    >  };
    >
    > --
    > 1.7.6.3
    >
    >
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2011-10-07 11:25    [W:4.786 / U:0.312 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site