lkml.org 
[lkml]   [2011]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] oprofile: Fix crash when unloading module (hr timer
Date
Oprofile may crash in a KVM guest while unlaoding modules. This
happens if oprofile_arch_init() fails and oprofile switches to the hr
timer mode as a fallback. In this case oprofile_arch_exit() is called,
but it never was initialized properly which causes the crash. This
patch fixes this.

oprofile: using timer interrupt.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
PGD 41da3f067 PUD 41d80e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
CPU 5
Modules linked in: oprofile(-)
Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim
RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
RSP: 0018:ffff88041de1de98 EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200
RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620
RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082
R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080
R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210
FS: 00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040)
Stack:
ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e
ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993
ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200
Call Trace:
[<ffffffffa000251e>] op_nmi_exit+0x15/0x17 [oprofile]
[<ffffffffa00022c2>] oprofile_arch_exit+0xe/0x10 [oprofile]
[<ffffffffa0004993>] oprofile_exit+0x13/0x15 [oprofile]
[<ffffffff81073115>] sys_delete_module+0x1c3/0x22f
[<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8148070b>] system_call_fastpath+0x16/0x1b
Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81
89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b
RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
RSP <ffff88041de1de98>
CR2: 0000000000000008
---[ end trace 06d4e95b6aa3b437 ]---
CC: stable@kernel.org # 2.6.37+
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
drivers/oprofile/oprof.c | 29 ++++++++++++++++++++++++-----
drivers/oprofile/timer_int.c | 1 +
2 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c
index dccd863..f8c752e 100644
--- a/drivers/oprofile/oprof.c
+++ b/drivers/oprofile/oprof.c
@@ -239,26 +239,45 @@ int oprofile_set_ulong(unsigned long *addr, unsigned long val)
return err;
}

+static int timer_mode;
+
static int __init oprofile_init(void)
{
int err;

+ /* always init architecture to setup backtrace support */
err = oprofile_arch_init(&oprofile_ops);
- if (err < 0 || timer) {
- printk(KERN_INFO "oprofile: using timer interrupt.\n");
+
+ timer_mode = err || timer; /* fall back to timer mode on errors */
+ if (timer_mode) {
+ if (!err)
+ oprofile_arch_exit();
err = oprofile_timer_init(&oprofile_ops);
if (err)
return err;
}
- return oprofilefs_register();
+
+ err = oprofilefs_register();
+ if (!err)
+ return 0;
+
+ /* failed */
+ if (timer_mode)
+ oprofile_timer_exit();
+ else
+ oprofile_arch_exit();
+
+ return err;
}


static void __exit oprofile_exit(void)
{
- oprofile_timer_exit();
oprofilefs_unregister();
- oprofile_arch_exit();
+ if (timer_mode)
+ oprofile_timer_exit();
+ else
+ oprofile_arch_exit();
}


diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c
index 3ef4462..878fba1 100644
--- a/drivers/oprofile/timer_int.c
+++ b/drivers/oprofile/timer_int.c
@@ -110,6 +110,7 @@ int oprofile_timer_init(struct oprofile_operations *ops)
ops->start = oprofile_hrtimer_start;
ops->stop = oprofile_hrtimer_stop;
ops->cpu_type = "timer";
+ printk(KERN_INFO "oprofile: using timer interrupt.\n");
return 0;
}

--
1.7.7



\
 
 \ /
  Last update: 2011-10-17 16:37    [W:0.217 / U:0.036 seconds]
©2003-2014 Jasper Spaans. Advertise on this site