lkml.org 
[lkml]   [2011]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/11] drbd: Define scale factors in a single place
Date
From: Andreas Gruenbacher <agruen@linbit.com>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
include/linux/drbd_limits.h | 29 +++++++++++++++++++++++++++--
1 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
index 3fc554b..9b76984 100644
--- a/include/linux/drbd_limits.h
+++ b/include/linux/drbd_limits.h
@@ -18,29 +18,35 @@
#define DRBD_MINOR_COUNT_MIN 1
#define DRBD_MINOR_COUNT_MAX (1U << 20)
#define DRBD_MINOR_COUNT_DEF 32
+#define DRBD_MINOR_COUNT_SCALE '1'

#define DRBD_VOLUME_MAX 65535

#define DRBD_DIALOG_REFRESH_MIN 0
#define DRBD_DIALOG_REFRESH_MAX 600
+#define DRBD_DIALOG_REFRESH_SCALE '1'

/* valid port number */
#define DRBD_PORT_MIN 1
#define DRBD_PORT_MAX 0xffff
+#define DRBD_PORT_SCALE '1'

/* startup { */
/* if you want more than 3.4 days, disable */
#define DRBD_WFC_TIMEOUT_MIN 0
#define DRBD_WFC_TIMEOUT_MAX 300000
#define DRBD_WFC_TIMEOUT_DEF 0
+#define DRBD_WFC_TIMEOUT_SCALE '1'

#define DRBD_DEGR_WFC_TIMEOUT_MIN 0
#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000
#define DRBD_DEGR_WFC_TIMEOUT_DEF 0
+#define DRBD_DEGR_WFC_TIMEOUT_SCALE '1'

#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0
#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000
#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0
+#define DRBD_OUTDATED_WFC_TIMEOUT_SCALE '1'
/* }*/

/* net { */
@@ -49,6 +55,7 @@
#define DRBD_TIMEOUT_MIN 1
#define DRBD_TIMEOUT_MAX 600
#define DRBD_TIMEOUT_DEF 60 /* 6 seconds */
+#define DRBD_TIMEOUT_SCALE '1'

/* If backing disk takes longer than disk_timeout, mark the disk as failed */
#define DRBD_DISK_TIMEOUT_MIN 0 /* 0 = disabled */
@@ -60,46 +67,55 @@
#define DRBD_CONNECT_INT_MIN 1
#define DRBD_CONNECT_INT_MAX 120
#define DRBD_CONNECT_INT_DEF 10 /* seconds */
+#define DRBD_CONNECT_INT_SCALE '1'

/* keep-alive probes when idle */
#define DRBD_PING_INT_MIN 1
#define DRBD_PING_INT_MAX 120
#define DRBD_PING_INT_DEF 10
+#define DRBD_PING_INT_SCALE '1'

/* timeout for the ping packets.*/
#define DRBD_PING_TIMEO_MIN 1
#define DRBD_PING_TIMEO_MAX 300
#define DRBD_PING_TIMEO_DEF 5
+#define DRBD_PING_TIMEO_SCALE '1'

/* max number of write requests between write barriers */
#define DRBD_MAX_EPOCH_SIZE_MIN 1
#define DRBD_MAX_EPOCH_SIZE_MAX 20000
#define DRBD_MAX_EPOCH_SIZE_DEF 2048
+#define DRBD_MAX_EPOCH_SIZE_SCALE '1'

/* I don't think that a tcp send buffer of more than 10M is useful */
#define DRBD_SNDBUF_SIZE_MIN 0
#define DRBD_SNDBUF_SIZE_MAX (10<<20)
#define DRBD_SNDBUF_SIZE_DEF 0
+#define DRBD_SNDBUF_SIZE_SCALE '1'

#define DRBD_RCVBUF_SIZE_MIN 0
#define DRBD_RCVBUF_SIZE_MAX (10<<20)
#define DRBD_RCVBUF_SIZE_DEF 0
+#define DRBD_RCVBUF_SIZE_SCALE '1'

/* @4k PageSize -> 128kB - 512MB */
#define DRBD_MAX_BUFFERS_MIN 32
#define DRBD_MAX_BUFFERS_MAX 131072
#define DRBD_MAX_BUFFERS_DEF 2048
+#define DRBD_MAX_BUFFERS_SCALE '1'

/* @4k PageSize -> 4kB - 512MB */
#define DRBD_UNPLUG_WATERMARK_MIN 1
#define DRBD_UNPLUG_WATERMARK_MAX 131072
#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16)
+#define DRBD_UNPLUG_WATERMARK_SCALE '1'

/* 0 is disabled.
* 200 should be more than enough even for very short timeouts */
#define DRBD_KO_COUNT_MIN 0
#define DRBD_KO_COUNT_MAX 200
#define DRBD_KO_COUNT_DEF 7
+#define DRBD_KO_COUNT_SCALE '1'
/* } */

/* syncer { */
@@ -118,6 +134,7 @@
#define DRBD_AL_EXTENTS_MIN 7
#define DRBD_AL_EXTENTS_MAX 6433
#define DRBD_AL_EXTENTS_DEF 1237
+#define DRBD_AL_EXTENTS_SCALE '1'

#define DRBD_MINOR_NUMBER_MIN -1
#define DRBD_MINOR_NUMBER_MAX (1<<30)
@@ -148,34 +165,42 @@
#define DRBD_MAX_BIO_BVECS_MIN 0
#define DRBD_MAX_BIO_BVECS_MAX 128
#define DRBD_MAX_BIO_BVECS_DEF 0
+#define DRBD_MAX_BIO_BVECS_SCALE '1'

#define DRBD_C_PLAN_AHEAD_MIN 0
#define DRBD_C_PLAN_AHEAD_MAX 300
#define DRBD_C_PLAN_AHEAD_DEF 20
+#define DRBD_C_PLAN_AHEAD_SCALE '1'

#define DRBD_C_DELAY_TARGET_MIN 1
#define DRBD_C_DELAY_TARGET_MAX 100
#define DRBD_C_DELAY_TARGET_DEF 10
+#define DRBD_C_DELAY_TARGET_SCALE '1'

#define DRBD_C_FILL_TARGET_MIN 0
#define DRBD_C_FILL_TARGET_MAX (1<<20) /* 500MByte in sec */
#define DRBD_C_FILL_TARGET_DEF 100 /* Try to place 50KiB in socket send buffer during resync */
+#define DRBD_C_FILL_TARGET_SCALE 's' /* sectors */

-#define DRBD_C_MAX_RATE_MIN 250 /* kByte/sec */
+#define DRBD_C_MAX_RATE_MIN 250
#define DRBD_C_MAX_RATE_MAX (4 << 20)
#define DRBD_C_MAX_RATE_DEF 102400
+#define DRBD_C_MAX_RATE_SCALE 'k' /* kilobytes */

-#define DRBD_C_MIN_RATE_MIN 0 /* kByte/sec */
+#define DRBD_C_MIN_RATE_MIN 0
#define DRBD_C_MIN_RATE_MAX (4 << 20)
#define DRBD_C_MIN_RATE_DEF 250
+#define DRBD_C_MIN_RATE_SCALE 'k' /* kilobytes */

#define DRBD_CONG_FILL_MIN 0
#define DRBD_CONG_FILL_MAX (10<<21) /* 10GByte in sectors */
#define DRBD_CONG_FILL_DEF 0
+#define DRBD_CONG_FILL_SCALE 's' /* sectors */

#define DRBD_CONG_EXTENTS_MIN DRBD_AL_EXTENTS_MIN
#define DRBD_CONG_EXTENTS_MAX DRBD_AL_EXTENTS_MAX
#define DRBD_CONG_EXTENTS_DEF DRBD_AL_EXTENTS_DEF
+#define DRBD_CONG_EXTENTS_SCALE DRBD_AL_EXTENTS_SCALE

#define DRBD_PROTOCOL_DEF DRBD_PROT_C

--
1.7.4.1


\
 
 \ /
  Last update: 2011-10-15 00:01    [W:0.068 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site