lkml.org 
[lkml]   [2011]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards
Date
From: Peter De Schrijver <pdeschrijver@nvidia.com>

This patch splits out the common part of pinmux and GPIO initialization for
seaboard and derived boards. This code is based on work done by Jong Kim
<jongk@nvidia.com>.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/mach-tegra/board-seaboard-pinmux.c | 14 ++++++++++----
1 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 74f78b7..b31c765 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2010 NVIDIA Corporation
+ * Copyright (C) 2010,2011 NVIDIA Corporation
+ * Copyright (C) 2011 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -160,7 +161,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {



-static struct tegra_gpio_table gpio_table[] = {
+static struct tegra_gpio_table common_gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
@@ -171,12 +172,17 @@ static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_USB1, .enable = true },
};

-void __init seaboard_pinmux_init(void)
+static void __init seaboard_common_pinmux_init(void)
{
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));

tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
ARRAY_SIZE(seaboard_drive_pinmux));

- tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+ tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table));
+}
+
+void __init seaboard_pinmux_init(void)
+{
+ seaboard_common_pinmux_init();
}
--
1.7.7.rc0.72.g4b5ea.dirty


\
 
 \ /
  Last update: 2011-10-12 13:55    [W:1.005 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site