lkml.org 
[lkml]   [2011]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] Fix file references in Kconfig files
From
Date
From: Johann Felix Soden <johfel@users.sourceforge.net>

This patch fixes file references to moved or deleted files
outside of Documentation/.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>

---
This patch fixes references that are not in the big patch from
Paul Bolle or in my drivers/ide/Kconfig patch (both in trivial.git).

arch/cris/Kconfig | 4 ++--
arch/cris/arch-v10/Kconfig | 12 ++++++------
drivers/net/irda/Kconfig | 2 +-
3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 17addac..408b055 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -282,8 +282,8 @@ config ETRAX_RTC
Enables drivers for the Real-Time Clock battery-backed chips on
some products. The kernel reads the time when booting, and
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
- rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
- device. You can check the time with cat /proc/rtc, but
+ rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
+ /dev/rtc device. You can check the time with cat /proc/rtc, but
normal time reading should be done using libc function time and
friends.

diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index adc164e..df9a38b 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -24,8 +24,8 @@ config ETRAX_PA_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PA. Some products
put the leds on PB or a memory-mapped latch (CSP0) instead.

@@ -34,8 +34,8 @@ config ETRAX_PB_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PB. Some products
put the leds on PA or a memory-mapped latch (CSP0) instead.

@@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on a memory-mapped latch
using chip select CSP0, this is mapped at 0x90000000.
Some products put the leds on PA or PB instead.
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 25bb2a0..a40fab4 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
M here. Some information is contained in the comments
- at the top of <file:drivers/net/irda/old_belkin.c>.
+ at the top of <file:drivers/net/irda/old_belkin-sir.c>.

config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
--
1.7.6.3




\
 
 \ /
  Last update: 2011-10-11 01:13    [W:0.052 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site