lkml.org 
[lkml]   [2011]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: 2.6.37 vlans on bnx2 not functional, panic with tcpdump
From
On Fri, Jan 7, 2011 at 12:46 AM, Michael Chan <mchan@broadcom.com> wrote:
> May be you have management firmware running on your devices that can
> change the behavior. Can you provide ethtool -i eth0 on both bnx2
> devices on your system?

This particular system has four onboard ports, a two port add-in card
and a single port fiber card all using bnx2, so I have some options to
try different devices if there's something different about them.
Details of all of them below.

Booting the same system back to 2.6.36 with the patch I mentioned
previously leaves me with a functioning network, so given it could be
management firmware related, why does it work on .36 but not .37 ?
The install is very stripped down, there's no udev or /sbin/hotplug
loading firmware behind my back as neither are installed. So firmware
is whatever comes with the kernel. Just having had a look, I see the
firmware provided with the kernel has changed in .37, but the output
of ethtool -i shows the same firmware being used with .36 and .37

Iain

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
03:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
04:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6
controllers (rev 01)
07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
07:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet (rev 20)
0a:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
0b:00.0 Ethernet controller: Broadcom Corporation NetXtreme II
BCM5708S Gigabit Ethernet (rev 12)

from 2.6.37:

root@64bit:~# ethtool -i eth0
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2 NCSI 2.0.6
bus-info: 0000:02:00.0
root@64bit:~# ethtool -i eth1
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2 NCSI 2.0.6
bus-info: 0000:02:00.1
root@64bit:~# ethtool -i eth2
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2
bus-info: 0000:03:00.0
root@64bit:~# ethtool -i eth3
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2
bus-info: 0000:03:00.1
root@64bit:~# ethtool -i eth4
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2
bus-info: 0000:07:00.0
root@64bit:~# ethtool -i eth5
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2
bus-info: 0000:07:00.1
root@64bit:~# ethtool -i eth6
driver: bnx2
version: 2.0.17
firmware-version: bc 1.9.6
bus-info: 0000:0b:00.0

from 2.6.36:

ethtool -i eth1
driver: bnx2
version: 2.0.17
firmware-version: bc 5.2.2 NCSI 2.0.6
bus-info: 0000:02:00.1


\
 
 \ /
  Last update: 2011-01-07 10:05    [W:0.072 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site