lkml.org 
[lkml]   [2011]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:perf/core] tools, perf: Documentation for the power events API
Commit-ID:  4b95f135f606c87e4056b6d7fd3c5781c818858b
Gitweb: http://git.kernel.org/tip/4b95f135f606c87e4056b6d7fd3c5781c818858b
Author: Jean Pihet <j-pihet@ti.com>
AuthorDate: Wed, 5 Jan 2011 19:49:02 +0100
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Wed, 5 Jan 2011 21:25:29 +0100

tools, perf: Documentation for the power events API

Provides documentation for the following:
- the new power trace API,
- the old (legacy) power trace API,
- the DEPRECATED Kconfig option usage.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: trenn@suse.de
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-3-git-send-email-j-pihet@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
Documentation/trace/events-power.txt | 90 ++++++++++++++++++++++++++++++++++
1 files changed, 90 insertions(+), 0 deletions(-)

diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt
new file mode 100644
index 0000000..96d87b6
--- /dev/null
+++ b/Documentation/trace/events-power.txt
@@ -0,0 +1,90 @@
+
+ Subsystem Trace Points: power
+
+The power tracing system captures events related to power transitions
+within the kernel. Broadly speaking there are three major subheadings:
+
+ o Power state switch which reports events related to suspend (S-states),
+ cpuidle (C-states) and cpufreq (P-states)
+ o System clock related changes
+ o Power domains related changes and transitions
+
+This document describes what each of the tracepoints is and why they
+might be useful.
+
+Cf. include/trace/events/power.h for the events definitions.
+
+1. Power state switch events
+============================
+
+1.1 New trace API
+-----------------
+
+A 'cpu' event class gathers the CPU-related events: cpuidle and
+cpufreq.
+
+cpu_idle "state=%lu cpu_id=%lu"
+cpu_frequency "state=%lu cpu_id=%lu"
+
+A suspend event is used to indicate the system going in and out of the
+suspend mode:
+
+machine_suspend "state=%lu"
+
+
+Note: the value of '-1' or '4294967295' for state means an exit from the current state,
+i.e. trace_cpu_idle(4, smp_processor_id()) means that the system
+enters the idle state 4, while trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id())
+means that the system exits the previous idle state.
+
+The event which has 'state=4294967295' in the trace is very important to the user
+space tools which are using it to detect the end of the current state, and so to
+correctly draw the states diagrams and to calculate accurate statistics etc.
+
+1.2 DEPRECATED trace API
+------------------------
+
+A new Kconfig option CONFIG_EVENT_POWER_TRACING_DEPRECATED with the default value of
+'y' has been created. This allows the legacy trace power API to be used conjointly
+with the new trace API.
+The Kconfig option, the old trace API (in include/trace/events/power.h) and the
+old trace points will disappear in a future release (namely 2.6.41).
+
+power_start "type=%lu state=%lu cpu_id=%lu"
+power_frequency "type=%lu state=%lu cpu_id=%lu"
+power_end "cpu_id=%lu"
+
+The 'type' parameter takes one of those macros:
+ . POWER_NONE = 0,
+ . POWER_CSTATE = 1, /* C-State */
+ . POWER_PSTATE = 2, /* Fequency change or DVFS */
+
+The 'state' parameter is set depending on the type:
+ . Target C-state for type=POWER_CSTATE,
+ . Target frequency for type=POWER_PSTATE,
+
+power_end is used to indicate the exit of a state, corresponding to the latest
+power_start event.
+
+2. Clocks events
+================
+The clock events are used for clock enable/disable and for
+clock rate change.
+
+clock_enable "%s state=%lu cpu_id=%lu"
+clock_disable "%s state=%lu cpu_id=%lu"
+clock_set_rate "%s state=%lu cpu_id=%lu"
+
+The first parameter gives the clock name (e.g. "gpio1_iclk").
+The second parameter is '1' for enable, '0' for disable, the target
+clock rate for set_rate.
+
+3. Power domains events
+=======================
+The power domain events are used for power domains transitions
+
+power_domain_target "%s state=%lu cpu_id=%lu"
+
+The first parameter gives the power domain name (e.g. "mpu_pwrdm").
+The second parameter is the power domain target state.
+

\
 
 \ /
  Last update: 2011-01-05 22:29    [W:0.177 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site