lkml.org 
[lkml]   [2011]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Using s3virge card in Sun Blade 2000
From
Date
On Mon, 2011-01-03 at 12:39 -0800, David Miller wrote:

> > I've just started digging into the innards of the s3fb driver, my first
> > attempt provoked this, simply by commenting out the check to see if it's
> > not the primary device and exits with -ENODEV:
> >
> > Jan 3 20:16:29 sodium kernel: ERROR(1): Cheetah error trap taken
> > afsr[0030100000000000] afar[00000000000003d0] TL1(0)
> > Jan 3 20:16:29 sodium kernel: ERROR(1): TPC[105918d8] TNPC[105918dc]
> > O7[10591884] TSTATE[4411001606]
> > Jan 3 20:16:29 sodium kernel: ERROR(1): TPC<s3_pci_probe+0x194/0x63c
> > [s3fb]>
> > Jan 3 20:16:29 sodium kernel: ERROR(1): M_SYND(0), E_SYND(0), Multiple
> > Errors, Privileged
>
> I know, this is what happens if you call vga_*() with a NULL first parameter
> on sparc64. It's accessing garbage addresses.

OK.

# lspci -vvxx -s 0:0:03
0000:00:03.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
(prog-if 00 [VGA controller])
Subsystem: S3 Inc. ViRGE/DX
Physical Slot: PCI 3
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 14000000 (32-bit, non-prefetchable)
[size=64M]
Region 1: [virtual] Memory at fffff80200000000 (32-bit,
non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffff80200000000 (32-bit,
non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffff80200000000 (32-bit,
non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffff80200000000 (32-bit,
non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffff80200000000 (32-bit,
non-prefetchable) [size=1]
Expansion ROM at 00130000 [disabled] [size=64K]
Kernel driver in use: s3fb
Kernel modules: s3fb
00: 33 53 01 8a 02 00 00 02 01 00 00 03 00 40 00 00
10: 00 00 00 14 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 33 53 01 8a
30: 00 00 13 00 00 00 00 00 00 00 00 00 00 01 04 ff
Those are 32 bit addresses, so I suppose I should be getting the base
address for the registers accesses from region 1, right?
--
Tactical Nuclear Kittens


\
 
 \ /
  Last update: 2011-01-03 22:39    [W:0.134 / U:0.196 seconds]
©2003-2011 Jasper Spaans