lkml.org 
[lkml]   [2011]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subjectkernel NULL pointer dereference in pxa_pm_enter (2.6.38-rc2)
From
Date
Hi,

I am still trying to get our Raumfeld platform working with kernels
newer than 2.6.36 and this morning I've updated to 2.6.38-rc2 to see if
any of the remaining problems with 2.6.37 have been fixed. Kernel boots
fine, but it crashes on suspend:

[ 95.701660] PM: Syncing filesystems ... done.
[ 95.749352] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 95.776504] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 95.797795] dac7512 spi0.2: ... can't suspend
[ 95.803906] libertas: mmc0:0001:1: suspend: PM flags = 0x0
[ 95.809362] libertas: Suspend without wake params -- powering down card.
[ 95.816103] hub 1-0:1.0: hub_suspend
[ 95.819873] usb usb1: bus suspend
[ 95.823170] pxa27x-ohci pxa27x-ohci: suspend root hub
[ 95.834919] mmc0: card 0001 removed
[ 95.839158] PM: suspend of devices complete after 41.589 msecs
[ 95.846167] PM: late suspend of devices complete after 1.111 msecs
[ 95.852603] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 95.860642] pgd = c6700000
[ 95.863327] [00000000] *pgd=a67fb831, *pte=00000000, *ppte=00000000
[ 95.869571] Internal error: Oops: 80000005 [#1]
[ 95.874071] last sysfs file: /sys/power/state
[ 95.878397] Modules linked in: eeti_ts libertas_sdio libertas pxamci ds2760_battery w1_ds2760 wire
[ 95.887354] CPU: 0 Not tainted (2.6.38-rc2+ #102)
[ 95.892377] PC is at 0x0
[ 95.894924] LR is at pxa_pm_enter+0x4c/0x120
[ 95.899167] pc : [<00000000>] lr : [<c0051dcc>] psr: 20000093
[ 95.899178] sp : c6749ee0 ip : 00000093 fp : 0003a490
[ 95.910568] r10: 00000004 r9 : c681c458 r8 : c6832000
[ 95.915756] r7 : 00000003 r6 : 00000000 r5 : c052f1a8 r4 : c052f1a4
[ 95.922244] r3 : c0510778 r2 : a6700018 r1 : c63f4120 r0 : 00000010
[ 95.928733] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 95.935908] Control: 0000397f Table: a6700018 DAC: 00000015
[ 95.941619] Process raumfeld-master (pid: 1246, stack limit = 0xc6748278)
[ 95.948366] Stack: (0xc6749ee0 to 0xc674a000)
[ 95.952701] 9ee0: c0383958 00000000 00000000 00000003 c0383958 c0086aa8 00000000 00000003
[ 95.960832] 9f00: 00000003 c0086c04 00000101 c04936bc 00000003 c0086320 00016798 00000004
[ 95.968966] 9f20: c60177e0 c681c440 c60167c0 c0413f54 c6749f80 c0196074 00000004 c00f7b78
[ 95.977099] 9f40: c6742e80 00000004 00016798 c6749f80 00016798 c6748000 00020000 c00b4184
[ 95.985231] 9f60: c527fa20 c6742e88 00000000 00000000 c6742e80 00000004 00016798 c00b42c8
[ 95.993364] 9f80: 00000000 00000000 00010658 00000001 0000000b beca8baf 407c52f0 00000004
[ 96.001496] 9fa0: c0049144 c0048fc0 0000000b beca8baf 0000000b 00016798 00000004 00000000
[ 96.009630] 9fc0: 0000000b beca8baf 407c52f0 00000004 407c613c 00039ee0 00000000 0003a490
[ 96.017763] 9fe0: 0001f9f8 beca8ba0 00010840 40802f84 20000010 0000000b 00000000 00000000
[ 96.025932] [<c0051dcc>] (pxa_pm_enter+0x4c/0x120) from [<c0086aa8>] (suspend_devices_and_enter+0x100/0x1ac)
[ 96.035714] [<c0086aa8>] (suspend_devices_and_enter+0x100/0x1ac) from [<c0086c04>] (enter_state+0xb0/0xf4)
[ 96.045317] [<c0086c04>] (enter_state+0xb0/0xf4) from [<c0086320>] (state_store+0x94/0xc8)
[ 96.053560] [<c0086320>] (state_store+0x94/0xc8) from [<c0196074>] (kobj_attr_store+0x1c/0x24)
[ 96.062146] [<c0196074>] (kobj_attr_store+0x1c/0x24) from [<c00f7b78>] (sysfs_write_file+0x104/0x13c)
[ 96.071341] [<c00f7b78>] (sysfs_write_file+0x104/0x13c) from [<c00b4184>] (vfs_write+0xac/0x138)
[ 96.080084] [<c00b4184>] (vfs_write+0xac/0x138) from [<c00b42c8>] (sys_write+0x40/0x6c)
[ 96.088072] [<c00b42c8>] (sys_write+0x40/0x6c) from [<c0048fc0>] (ret_fast_syscall+0x0/0x2c)
[ 96.096467] Code: bad PC value
[ 96.099501] ---[ end trace 99a4afc7272fd902 ]---

I've added some printk() statements and found that pxa_cpu_pm_fns->save
and pxa_cpu_pm_fns->restore are both NULL. As far as I can see pxa25x.c
and pxa27x.c both set the save and restore function pointers, pxa3xx.c
however doesn't. Is this functionality missing from pxa3xx.c or should
pxa_pm_enter() check if the function pointers are set before using them?


Regards,
Sven




\
 
 \ /
  Last update: 2011-01-24 10:31    [from the cache]
©2003-2011 Jasper Spaans