lkml.org 
[lkml]   [2011]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 08/15] x86/dtb: add support for PCI devices backed by dtb nodes
On Fri, Dec 17, 2010 at 04:33:46PM +0100, Sebastian Andrzej Siewior wrote:
> x86_of_pci_init() does two things:
> - it provides a generic irq enable and disable function. enable queries
> the device tree for the interrupt information, calls ->xlate on the
> irq host and updates the pci->irq information for the device.
>
> - it walks through PCI buss(es) in the device tree and adds its children
> (devices) nodes to appropriate pci_dev nodes in kernel. So the dtb
> node information is available at probe time of the PCI device.
>
> Adding a PCI bus based on the information in the device tree is
> currently not supported. Right now direct access via ioports is used.
>
> Cc: devicetree-discuss@lists.ozlabs.org
> Tested-by: Dirk Brandewie <dirk.brandewie@gmail.com>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> arch/x86/include/asm/prom.h | 17 +++++++++
> arch/x86/kernel/prom.c | 80 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 97 insertions(+), 0 deletions(-)
>
> diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
> index 3bc8ed5..9f7484e 100644
> --- a/arch/x86/include/asm/prom.h
> +++ b/arch/x86/include/asm/prom.h
> @@ -16,6 +16,7 @@
>
> #include <linux/of.h>
> #include <linux/types.h>
> +#include <linux/pci.h>
> #include <asm/irq.h>
> #include <asm/atomic.h>
> #include <asm/setup.h>
> @@ -28,8 +29,24 @@ extern void add_dtb(u64 data);
> void x86_dtb_find_config(void);
> void x86_dtb_get_config(unsigned int unused);
> void add_interrupt_host(struct irq_domain *ih);
> +void __cpuinit x86_of_pci_init(void);
> +
> +static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
> +{
> + return pdev->dev.of_node;
> +}
> +
> +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
> +{
> + if (bus->self)
> + return pci_device_to_OF_node(bus->self);
> + else
> + return NULL;
> +}
> +

Hmmm, maybe pci_device_to_OF_node() should be checking for
bus->self == NULL. It would probably be safer overall.

Otherwise, the patch looks good to me.

g.


> #else
> static inline void add_dtb(u64 data) { }
> +static inline void x86_of_pci_init(void) { }
> #define x86_dtb_find_config x86_init_noop
> #define x86_dtb_get_config x86_init_uint_noop
> #define of_ioapic 0
> diff --git a/arch/x86/kernel/prom.c b/arch/x86/kernel/prom.c
> index 40ad8c0..a449dc6 100644
> --- a/arch/x86/kernel/prom.c
> +++ b/arch/x86/kernel/prom.c
> @@ -9,10 +9,13 @@
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/slab.h>
> +#include <linux/pci.h>
> +#include <linux/of_pci.h>
>
> #include <asm/hpet.h>
> #include <asm/irq_controller.h>
> #include <asm/io_apic.h>
> +#include <asm/pci_x86.h>
>
> __initdata u64 initial_dtb;
> char __initdata cmd_line[COMMAND_LINE_SIZE];
> @@ -102,6 +105,83 @@ void __init add_dtb(u64 data)
> initial_dtb = data + offsetof(struct setup_data, data);
> }
>
> +static int x86_of_pci_irq_enable(struct pci_dev *dev)
> +{
> + struct of_irq oirq;
> + u32 virq;
> + int ret;
> + u8 pin;
> +
> + ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
> + if (ret)
> + return ret;
> + if (!pin)
> + return 0;
> +
> + ret = of_irq_map_pci(dev, &oirq);
> + if (ret)
> + return ret;
> +
> + virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
> + oirq.size);
> + if (virq == NO_IRQ)
> + return -EINVAL;
> + dev->irq = virq;
> + return 0;
> +}
> +
> +static void x86_of_pci_irq_disable(struct pci_dev *dev)
> +{
> +}
> +
> +void __cpuinit x86_of_pci_init(void)
> +{
> + struct device_node *np;
> +
> + pcibios_enable_irq = x86_of_pci_irq_enable;
> + pcibios_disable_irq = x86_of_pci_irq_disable;
> +
> + for_each_node_by_type(np, "pci") {
> + const void *prop;
> + struct pci_bus *bus;
> + unsigned int bus_min;
> + struct device_node *child;
> +
> + prop = of_get_property(np, "bus-range", NULL);
> + if (!prop)
> + continue;
> + bus_min = be32_to_cpup(prop);
> +
> + bus = pci_find_bus(0, bus_min);
> + if (!bus) {
> + printk(KERN_ERR "Can't find a node for bus %s.\n",
> + np->full_name);
> + continue;
> + }
> +
> + if (bus->self)
> + bus->self->dev.of_node = np;
> + else
> + bus->dev.of_node = np;
> +
> + for_each_child_of_node(np, child) {
> + struct pci_dev *dev;
> + u32 devfn;
> +
> + prop = of_get_property(child, "reg", NULL);
> + if (!prop)
> + continue;
> +
> + devfn = (be32_to_cpup(prop) >> 8) & 0xff;
> + dev = pci_get_slot(bus, devfn);
> + if (!dev)
> + continue;
> + dev->dev.of_node = child;
> + pci_dev_put(dev);
> + }
> + }
> +}
> +
> static void __init dtb_setup_hpet(void)
> {
> struct device_node *dn;
> --
> 1.7.3.2
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss


\
 
 \ /
  Last update: 2011-01-12 00:49    [W:0.189 / U:3.260 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site