lkml.org 
[lkml]   [2010]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 105/223]drivers/net/Kconfig Update broken web addresses.
    Date
    Below you will find an Update to a broken web address.
    Please let me know if this needs to be changed.

    Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>

    ---
    drivers/net/Kconfig | 37 +++++++++++++++----------------------
    1 files changed, 15 insertions(+), 22 deletions(-)

    diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
    index 2cc81a5..a026fd7 100644
    --- a/drivers/net/Kconfig
    +++ b/drivers/net/Kconfig
    @@ -169,9 +169,7 @@ config NET_SB1000
    a connection. Further documentation and the necessary scripts can be
    found at:

    - <http://www.jacksonville.net/~fventuri/>
    - <http://home.adelphia.net/~siglercm/sb1000.html>
    - <http://linuxpower.cx/~cable/>
    + <http://web.archive.org/web/*/http://www.jacksonville.net/~fventuri/>

    If you don't have this card, of course say N.

    @@ -921,7 +919,7 @@ config SMC91X
    including the SMC91C94 and the SMC91C111. Say Y if you want it
    compiled into the kernel, and read the file
    <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
    - available from <http://www.linuxdoc.org/docs.html#howto>.
    + available from <http://www.tldp.org/docs.html#howto>.

    This driver is also available as a module ( = code which can be
    inserted in and removed from the running kernel whenever you want).
    @@ -1031,7 +1029,7 @@ config SMC911X
    including the new LAN9115, LAN9116, LAN9117, and LAN9118.
    Say Y if you want it compiled into the kernel,
    and read the Ethernet-HOWTO, available from
    - <http://www.linuxdoc.org/docs.html#howto>.
    + <http://www.tldp.org/docs.html#howto>.

    This driver is also available as a module. The module will be
    called smc911x. If you want to compile it as a module, say M
    @@ -1511,10 +1509,6 @@ config E100

    to identify the adapter.

    - For the latest Intel PRO/100 network driver for Linux, see:
    -
    - <http://appsr.intel.com/scripts-df/support_intel.asp>
    -
    More specific information on configuring the driver is in
    <file:Documentation/networking/e100.txt>.

    @@ -1541,7 +1535,7 @@ config FEALNX
    help
    Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
    cards. Specifications and data at
    - <http://www.myson.com.hk/mtd/datasheet/>.
    + <http://www.datasheetarchive.com/datasheet-pdf/022/DSA00384882.html>.

    config NATSEMI
    tristate "National Semiconductor DP8381x series PCI Ethernet support"
    @@ -1552,7 +1546,7 @@ config NATSEMI
    which is used in cards from PureData, NetGear, Linksys
    and others, including the 83815 chip.
    More specific information and updates are available from
    - <http://www.scyld.com/network/natsemi.html>.
    + <http://www.penguincomputing.com/>.

    config NE2K_PCI
    tristate "PCI NE2000 and clones support (see help)"
    @@ -1703,7 +1697,7 @@ config EPIC100
    This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
    which is based on the SMC83c17x (EPIC/100).
    More specific information and updates are available from
    - <http://www.scyld.com/network/epic100.html>.
    + <http://www.penguincomputing.com/>.

    config SMSC9420
    tristate "SMSC LAN9420 PCI ethernet adapter support"
    @@ -1715,7 +1709,7 @@ config SMSC9420
    This is a driver for SMSC's LAN9420 PCI ethernet adapter.
    Say Y if you want it compiled into the kernel,
    and read the Ethernet-HOWTO, available from
    - <http://www.linuxdoc.org/docs.html#howto>.
    + <http://www.tldp.org/docs.html#howto>.

    This driver is also available as a module. The module will be
    called smsc9420. If you want to compile it as a module, say M
    @@ -1729,7 +1723,7 @@ config SUNDANCE
    help
    This driver is for the Sundance "Alta" chip.
    More specific information and updates are available from
    - <http://www.scyld.com/network/sundance.html>.
    + <http://www.penguincomputing.com/>.

    config SUNDANCE_MMIO
    bool "Use MMIO instead of PIO"
    @@ -2201,7 +2195,7 @@ config YELLOWFIN
    Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
    adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
    used by the Beowulf Linux cluster project. See
    - <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
    + <http://www.beowulf.org/> for more
    information about this driver in particular and Beowulf in general.

    To compile this driver as a module, choose M here: the module
    @@ -2550,7 +2544,7 @@ config CHELSIO_T1
    our website at <http://www.chelsio.com>.

    For customer support, please visit our customer support page at
    - <http://www.chelsio.com/support.htm>.
    + <http://www.chelsio.com/support.html>.

    Please send feedback to <linux-bugs@chelsio.com>.

    @@ -2582,7 +2576,7 @@ config CHELSIO_T3
    our website at <http://www.chelsio.com>.

    For customer support, please visit our customer support page at
    - <http://www.chelsio.com/support.htm>.
    + <http://www.chelsio.com/support.html>.

    Please send feedback to <linux-bugs@chelsio.com>.

    @@ -2607,7 +2601,7 @@ config CHELSIO_T4
    our website at <http://www.chelsio.com>.

    For customer support, please visit our customer support page at
    - <http://www.chelsio.com/support.htm>.
    + <http://www.chelsio.com/support.html>.

    Please send feedback to <linux-bugs@chelsio.com>.

    @@ -2630,7 +2624,7 @@ config CHELSIO_T4VF
    our website at <http://www.chelsio.com>.

    For customer support, please visit our customer support page at
    - <http://www.chelsio.com/support.htm>.
    + <http://www.chelsio.com/support.html>.

    Please send feedback to <linux-bugs@chelsio.com>.

    @@ -3048,7 +3042,6 @@ config PLIP
    <file:Documentation/networking/PLIP.txt>. The cables can be up to
    15m long. Mode 0 works also if one of the machines runs DOS/Windows
    and has some PLIP software installed, e.g. the Crynwr PLIP packet
    - driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
    and winsock or NCSA's telnet.

    If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
    @@ -3262,8 +3255,8 @@ config SLIP_COMPRESSED
    <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
    allows you to use SLIP over a regular dial up shell connection, you
    definitely want to say Y here. The NET-3-HOWTO, available from
    - <http://www.tldp.org/docs.html#howto>, explains how to configure
    - CSLIP. This won't enlarge your kernel.
    + <http://web.archive.org/web/*/http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>,
    + explains how to configure CSLIP. This won't enlarge your kernel.

    config SLHC
    tristate
    --
    1.7.2.1


    \
     
     \ /
      Last update: 2010-09-10 00:51    [W:0.042 / U:30.608 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site