lkml.org 
[lkml]   [2010]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/4] ARM: OMAP3LOGIC: Adding SDMMC support
Date
Add low-level initialization for hsmmc controller for
LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board.

Signed-off-by: Tim Nordell <tim.nordell@logicpd.com>
---
arch/arm/mach-omap2/board-omap3logic.c | 38 +++++++++++++++++++++++++++++++-
1 files changed, 37 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index ac3b0f7..e1f8fbe 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -33,6 +33,7 @@
#include <asm/mach/map.h>

#include "mux.h"
+#include "hsmmc.h"

#include <plat/mux.h>
#include <plat/board.h>
@@ -87,6 +88,7 @@ static struct twl4030_platform_data omap3logic_twldata = {

/* platform_data for children goes here */
.gpio = &omap3logic_gpio_data,
+ .vmmc1 = &omap3logic_vmmc1,
};

static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = {
@@ -105,6 +107,40 @@ static int __init omap3logic_i2c_init(void)
return 0;
}

+static struct omap2_hsmmc_info __initdata board_mmc_info[] = {
+ {
+ .name = "external",
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+static void __init board_mmc_init(void)
+{
+ if (machine_is_omap3530_lv_som()) {
+ /* OMAP3530 LV SOM board */
+ board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD;
+ board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP;
+ omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT);
+ } else if (machine_is_omap3_torpedo()) {
+ /* OMAP3 Torpedo board */
+ board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD;
+ omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT);
+ } else {
+ /* unsupported board */
+ printk(KERN_ERR "%s(): unknown machine type\n", __func__);
+ return;
+ }
+
+ omap2_hsmmc_init(board_mmc_info);
+ /* link regulators to MMC adapters */
+ omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
+}
+
static void __init omap3logic_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
@@ -116,7 +152,7 @@ static void __init omap3logic_init(void)
{
omap3logic_i2c_init();
omap_serial_init();
-
+ board_mmc_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
--
1.7.1


\
 
 \ /
  Last update: 2010-09-27 20:11    [W:2.371 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site