lkml.org 
[lkml]   [2010]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] opp: introduce library for device-specific OPPs
Date
"Rafael J. Wysocki" <rjw@sisk.pl> writes:

[...]

>> >> In terms of the lifetime rules on the nodes in the list:
>> >> The list is expected to be maintained once created, entries are expected
>> >> to be added optimally and not expected to be destroyed, the choice of
>> >> list implementation was for reducing the complexity of the code itself
>> >> and not yet meant as a mechanism to dynamically add and delete nodes on
>> >> the fly.. Essentially, it was intended for the SOC framework to ensure
>> >> it plugs in the OPP entries optimally and not create a humongous list of
>> >> all possible OPPs for all families of the vendor SOCs - even though it
>> >> is possible to use the OPP layer so - it just wont be smart to do so
>> >> considering list scan latencies on hot paths such as cpufreq transitions
>> >> or idle transitions.
>> >
>> > If the list nodes are not supposed to be added and removed dynamically,
>> > it probably would make sense to create data structures containing
>> > the "available" OPPs only, once they are known, and simply free the object
>> > representing the other ones.
>> I covered the usage in my reply here:
>> http://marc.info/?l=linux-arm-kernel&m=128476570300466&w=2
>> but to repeat, the list is dynamic during initialization but remains
>> static after initialization based on SOC framework implementation - this
>> is best implemented with a list (we had started with an original array
>> implementation which evolved to the current list implementation
>> http://marc.info/?l=linux-omap&m=125912217718770&w=2)
>
> Well, my point is, since the _final_ set of OPPs doesn't really
> change, there's no need to use a list for storing it in principle.
>
> Your current algorithm seems to be:
> (1) Create a list of all _possible_ OPPs.
> (2) Mark the ones that can actually be used on the given hardware as
> "available".
> (3) Whenever we need to find an OPP to use, browse the entire list.
> This isn't optimal, because the OPPs that are not marked as "available" in (2)
> will never be used, although they _will_ be inspected while browsing the list.

A little clarificaion about "will never be used" below...

> So, I think a better algorithm would be:
> (1) Create a list of all possible OPPs.
> (2) Drop the nonavailable OPPs from the list.
> (3) Whenever we need to find an OPP to use, browse the entire list.
>
> But then, it may be better to simply move the list we get in (2) into an
> array, because the browsing is going to require fewer memory accesses in
> that case (also, an array would use less memory than the list). So, perhaps,
> it's better to change the algorithm even further:
> (1) Create a list of all possible OPPs.
> (2) Drop the nonavailable OPPs from the list.
> (3) Move the list we got in (2) into a sorted array.
> (4) Whenever we need to find an OPP to use, browse the array
> (perhaps using binary search).

Just a little clarification on "available." The intended use of this flag
was not just a one-time "available on hardware X." It was also intended
to be able to add/remove availbale OPPs dynamically at run-time.

More specifically, it's intended for use to *temporarily* remove an OPP
from being selected. The production usage of this would primarily for
thermal considerations (e.g. don't use OPPx until the temperature drops)

However, for PM development & debug, we also use this to temporarily
take a class of OPPs out of the running for test/debug purposes
(e.g. driver X runs great at OPPx and OPPy, but not OPPz.) So the
ability to temporarily be selective about OPPs at runtime for
debug/development is extremely useful.

So, to summarize, "most of the time", all the OPPs that were added (via
opp_add()) will be "available". Ones that are !availble will likely
only be so temporarily, so I'm not sure that the overhead of keeping a
separate structure for the available and !available OPPs is worth it.
Especially, since OPP changes are relatively infrequent.

Kevin


\
 
 \ /
  Last update: 2010-09-20 17:29    [W:0.062 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site