lkml.org 
[lkml]   [2010]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] tty: icount changeover for other main devices
Date
Again basically cut and paste

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

arch/ia64/hp/sim/simserial.c | 12 +-----
drivers/char/amiserial.c | 56 ++++++++++++++++------------
drivers/char/cyclades.c | 49 +++++++++++++------------
drivers/char/ip2/ip2main.c | 71 ++++++++++++++++++++++--------------
drivers/char/mxser.c | 62 ++++++++++++++++++-------------
drivers/char/nozomi.c | 37 +++++++++----------
drivers/char/pcmcia/synclink_cs.c | 60 ++++++++++++++----------------
drivers/char/synclink.c | 73 +++++++++++++++++--------------------
drivers/char/synclink_gt.c | 55 +++++++++++++++-------------
drivers/char/synclinkmp.c | 61 ++++++++++++++-----------------
drivers/serial/68360serial.c | 51 +++++++++++++-------------
net/bluetooth/rfcomm/tty.c | 4 --
12 files changed, 297 insertions(+), 294 deletions(-)


diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 1e8d71a..13633da 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
{
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
case TIOCMIWAIT:
printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
return 0;
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
- return 0;
-
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index a11c8c9..3f2861a 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1263,6 +1263,36 @@ static int rs_break(struct tty_struct *tty, int break_state)
return 0;
}

+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int rs_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct async_struct *info = tty->driver_data;
+ struct async_icount cnow;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ cnow = info->state->icount;
+ local_irq_restore(flags);
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}

static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
@@ -1332,31 +1362,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
}
/* NOTREACHED */

- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- local_irq_save(flags);
- cnow = info->state->icount;
- local_irq_restore(flags);
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- if (copy_to_user(argp, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
@@ -1958,6 +1963,7 @@ static const struct tty_operations serial_ops = {
.wait_until_sent = rs_wait_until_sent,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
+ .get_icount = rs_get_icount,
.proc_fops = &rs_proc_fops,
};

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 27aad94..3714b70 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -2790,29 +2790,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT: {
- struct serial_icounter_struct sic = { };
-
- spin_lock_irqsave(&info->card->card_lock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->card->card_lock, flags);
-
- sic.cts = cnow.cts;
- sic.dsr = cnow.dsr;
- sic.rng = cnow.rng;
- sic.dcd = cnow.dcd;
- sic.rx = cnow.rx;
- sic.tx = cnow.tx;
- sic.frame = cnow.frame;
- sic.overrun = cnow.overrun;
- sic.parity = cnow.parity;
- sic.brk = cnow.brk;
- sic.buf_overrun = cnow.buf_overrun;
-
- if (copy_to_user(argp, &sic, sizeof(sic)))
- ret_val = -EFAULT;
- break;
- }
default:
ret_val = -ENOIOCTLCMD;
}
@@ -2823,6 +2800,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
return ret_val;
} /* cy_ioctl */

+static int cy_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *sic)
+{
+ struct cyclades_port *info = tty->driver_data;
+ struct cyclades_icount cnow; /* Used to snapshot */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->card->card_lock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+ sic->cts = cnow.cts;
+ sic->dsr = cnow.dsr;
+ sic->rng = cnow.rng;
+ sic->dcd = cnow.dcd;
+ sic->rx = cnow.rx;
+ sic->tx = cnow.tx;
+ sic->frame = cnow.frame;
+ sic->overrun = cnow.overrun;
+ sic->parity = cnow.parity;
+ sic->brk = cnow.brk;
+ sic->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
/*
* This routine allows the tty driver to be notified when
* device's termios settings have changed. Note that a
@@ -4084,6 +4086,7 @@ static const struct tty_operations cy_ops = {
.wait_until_sent = cy_wait_until_sent,
.tiocmget = cy_tiocmget,
.tiocmset = cy_tiocmset,
+ .get_icount = cy_get_icount,
.proc_fops = &cyclades_proc_fops,
};

diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index d4b71e8..b0d353e 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -183,6 +183,8 @@ static void ip2_hangup(PTTY);
static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);

static void set_irq(int, int);
static void ip2_interrupt_bh(struct work_struct *work);
@@ -454,6 +456,7 @@ static const struct tty_operations ip2_ops = {
.hangup = ip2_hangup,
.tiocmget = ip2_tiocmget,
.tiocmset = ip2_tiocmset,
+ .get_icount = ip2_get_icount,
.proc_fops = &ip2_proc_fops,
};

@@ -2297,34 +2300,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
break;

/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for RI where
- * only 0->1 is counted. The controller is quite capable of counting
- * both, but this done to preserve compatibility with the standard
- * serial driver.
- */
- case TIOCGICOUNT:
- ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
-
- write_lock_irqsave(&pB->read_fifo_spinlock, flags);
- cnow = pCh->icount;
- write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
- p_cuser = argp;
- rc = put_user(cnow.cts, &p_cuser->cts);
- rc = put_user(cnow.dsr, &p_cuser->dsr);
- rc = put_user(cnow.rng, &p_cuser->rng);
- rc = put_user(cnow.dcd, &p_cuser->dcd);
- rc = put_user(cnow.rx, &p_cuser->rx);
- rc = put_user(cnow.tx, &p_cuser->tx);
- rc = put_user(cnow.frame, &p_cuser->frame);
- rc = put_user(cnow.overrun, &p_cuser->overrun);
- rc = put_user(cnow.parity, &p_cuser->parity);
- rc = put_user(cnow.brk, &p_cuser->brk);
- rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
- break;
-
- /*
* The rest are not supported by this driver. By returning -ENOIOCTLCMD they
* will be passed to the line discipline for it to handle.
*/
@@ -2348,6 +2323,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
return rc;
}

+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ i2ChanStrPtr pCh = DevTable[tty->index];
+ i2eBordStrPtr pB;
+ struct async_icount cnow; /* kernel counter temp */
+ unsigned long flags;
+
+ if ( pCh == NULL )
+ return -ENODEV;
+
+ pB = pCh->pMyBord;
+
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for RI where
+ * only 0->1 is counted. The controller is quite capable of counting
+ * both, but this done to preserve compatibility with the standard
+ * serial driver.
+ */
+
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
+ cnow = pCh->icount;
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
/******************************************************************************/
/* Function: GetSerialInfo() */
/* Parameters: Pointer to channel structure */
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 9d243de..463df27 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1700,7 +1700,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}

- if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
+ if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
test_bit(TTY_IO_ERROR, &tty->flags))
return -EIO;

@@ -1730,32 +1730,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,

return wait_event_interruptible(info->port.delta_msr_wait,
mxser_cflags_changed(info, arg, &cnow));
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT: {
- struct serial_icounter_struct icnt = { 0 };
- spin_lock_irqsave(&info->slock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->slock, flags);
-
- icnt.frame = cnow.frame;
- icnt.brk = cnow.brk;
- icnt.overrun = cnow.overrun;
- icnt.buf_overrun = cnow.buf_overrun;
- icnt.parity = cnow.parity;
- icnt.rx = cnow.rx;
- icnt.tx = cnow.tx;
- icnt.cts = cnow.cts;
- icnt.dsr = cnow.dsr;
- icnt.rng = cnow.rng;
- icnt.dcd = cnow.dcd;
-
- return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
- }
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
@@ -1828,6 +1802,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}

+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+
+static int mxser_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct mxser_port *info = tty->driver_data;
+ struct async_icount cnow;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ icount->frame = cnow.frame;
+ icount->brk = cnow.brk;
+ icount->overrun = cnow.overrun;
+ icount->buf_overrun = cnow.buf_overrun;
+ icount->parity = cnow.parity;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ return 0;
+}
+
static void mxser_stoprx(struct tty_struct *tty)
{
struct mxser_port *info = tty->driver_data;
@@ -2326,6 +2333,7 @@ static const struct tty_operations mxser_ops = {
.wait_until_sent = mxser_wait_until_sent,
.tiocmget = mxser_tiocmget,
.tiocmset = mxser_tiocmset,
+ .get_icount = mxser_get_icount,
};

struct tty_port_operations mxser_port_ops = {
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 817169c..dd3f9b1 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1804,24 +1804,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
return ret;
}

-static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
+static int ntty_tiocgicount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
{
+ struct port *port = tty->driver_data;
const struct async_icount cnow = port->tty_icount;
- struct serial_icounter_struct icount;
-
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
}

static int ntty_ioctl(struct tty_struct *tty, struct file *file,
@@ -1840,9 +1840,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
rval = wait_event_interruptible(port->tty_wait,
ntty_cflags_changed(port, arg, &cprev));
break;
- } case TIOCGICOUNT:
- rval = ntty_ioctl_tiocgicount(port, argp);
- break;
+ }
default:
DBG1("ERR: 0x%08X, %d", cmd, cmd);
break;
@@ -1922,6 +1920,7 @@ static const struct tty_operations tty_ops = {
.chars_in_buffer = ntty_chars_in_buffer,
.tiocmget = ntty_tiocmget,
.tiocmset = ntty_tiocmset,
+ .get_icount = ntty_tiocgicount,
.install = ntty_install,
.cleanup = ntty_cleanup,
};
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 9ecd6be..8e7c781 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2215,6 +2215,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state)
return 0;
}

+static int mgslpc_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
/* Service an IOCTL request
*
* Arguments:
@@ -2230,11 +2256,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- int error;
- struct mgsl_icount cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
void __user *argp = (void __user *)arg;
- unsigned long flags;

if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2244,7 +2266,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
return -ENODEV;

if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -2274,34 +2296,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
return wait_events(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- PUT_USER(error,cnow.cts, &p_cuser->cts);
- if (error) return error;
- PUT_USER(error,cnow.dsr, &p_cuser->dsr);
- if (error) return error;
- PUT_USER(error,cnow.rng, &p_cuser->rng);
- if (error) return error;
- PUT_USER(error,cnow.dcd, &p_cuser->dcd);
- if (error) return error;
- PUT_USER(error,cnow.rx, &p_cuser->rx);
- if (error) return error;
- PUT_USER(error,cnow.tx, &p_cuser->tx);
- if (error) return error;
- PUT_USER(error,cnow.frame, &p_cuser->frame);
- if (error) return error;
- PUT_USER(error,cnow.overrun, &p_cuser->overrun);
- if (error) return error;
- PUT_USER(error,cnow.parity, &p_cuser->parity);
- if (error) return error;
- PUT_USER(error,cnow.brk, &p_cuser->brk);
- if (error) return error;
- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
- if (error) return error;
- return 0;
default:
return -ENOIOCTLCMD;
}
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index a2a5800..0ebae80 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2925,6 +2925,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state)

} /* end of mgsl_break() */

+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int msgl_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct mgsl_struct * info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
/* mgsl_ioctl() Service an IOCTL request
*
* Arguments:
@@ -2949,7 +2981,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
return -ENODEV;

if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -2959,11 +2991,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,

static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
{
- int error;
- struct mgsl_icount cnow; /* kernel counter temps */
void __user *argp = (void __user *)arg;
- struct serial_icounter_struct __user *p_cuser; /* user space */
- unsigned long flags;

switch (cmd) {
case MGSL_IOCGPARAMS:
@@ -2992,40 +3020,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);

- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->irq_spinlock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->irq_spinlock,flags);
- p_cuser = argp;
- PUT_USER(error,cnow.cts, &p_cuser->cts);
- if (error) return error;
- PUT_USER(error,cnow.dsr, &p_cuser->dsr);
- if (error) return error;
- PUT_USER(error,cnow.rng, &p_cuser->rng);
- if (error) return error;
- PUT_USER(error,cnow.dcd, &p_cuser->dcd);
- if (error) return error;
- PUT_USER(error,cnow.rx, &p_cuser->rx);
- if (error) return error;
- PUT_USER(error,cnow.tx, &p_cuser->tx);
- if (error) return error;
- PUT_USER(error,cnow.frame, &p_cuser->frame);
- if (error) return error;
- PUT_USER(error,cnow.overrun, &p_cuser->overrun);
- if (error) return error;
- PUT_USER(error,cnow.parity, &p_cuser->parity);
- if (error) return error;
- PUT_USER(error,cnow.brk, &p_cuser->brk);
- if (error) return error;
- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
- if (error) return error;
- return 0;
default:
return -ENOIOCTLCMD;
}
@@ -4328,6 +4322,7 @@ static const struct tty_operations mgsl_ops = {
.hangup = mgsl_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = msgl_get_icount,
.proc_fops = &mgsl_proc_fops,
};

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index e63b830..1746d91 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1032,9 +1032,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct slgt_info *info = tty->driver_data;
- struct mgsl_icount cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
- unsigned long flags;
void __user *argp = (void __user *)arg;
int ret;

@@ -1043,7 +1040,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));

if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1053,24 +1050,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return wait_mgsl_event(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd) ||
- put_user(cnow.rx, &p_cuser->rx) ||
- put_user(cnow.tx, &p_cuser->tx) ||
- put_user(cnow.frame, &p_cuser->frame) ||
- put_user(cnow.overrun, &p_cuser->overrun) ||
- put_user(cnow.parity, &p_cuser->parity) ||
- put_user(cnow.brk, &p_cuser->brk) ||
- put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
- return 0;
case MGSL_IOCSGPIO:
return set_gpio(info, argp);
case MGSL_IOCGGPIO:
@@ -1117,6 +1096,33 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return ret;
}

+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct slgt_info *info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
/*
* support for 32 bit ioctl calls on 64 bit systems
*/
@@ -1206,10 +1212,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
case MGSL_IOCSGPIO:
case MGSL_IOCGGPIO:
case MGSL_IOCWAITGPIO:
- case TIOCGICOUNT:
- rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
- break;
-
case MGSL_IOCSTXIDLE:
case MGSL_IOCTXENABLE:
case MGSL_IOCRXENABLE:
@@ -3642,6 +3644,7 @@ static const struct tty_operations ops = {
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = get_icount,
.proc_fops = &synclink_gt_proc_fops,
};

diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index e56caf7..2f9eb4b 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -1258,10 +1258,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = tty->driver_data;
- int error;
- struct mgsl_icount cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
- unsigned long flags;
void __user *argp = (void __user *)arg;

if (debug_level >= DEBUG_LEVEL_INFO)
@@ -1272,7 +1268,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return -ENODEV;

if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1310,40 +1306,38 @@ static int ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- PUT_USER(error,cnow.cts, &p_cuser->cts);
- if (error) return error;
- PUT_USER(error,cnow.dsr, &p_cuser->dsr);
- if (error) return error;
- PUT_USER(error,cnow.rng, &p_cuser->rng);
- if (error) return error;
- PUT_USER(error,cnow.dcd, &p_cuser->dcd);
- if (error) return error;
- PUT_USER(error,cnow.rx, &p_cuser->rx);
- if (error) return error;
- PUT_USER(error,cnow.tx, &p_cuser->tx);
- if (error) return error;
- PUT_USER(error,cnow.frame, &p_cuser->frame);
- if (error) return error;
- PUT_USER(error,cnow.overrun, &p_cuser->overrun);
- if (error) return error;
- PUT_USER(error,cnow.parity, &p_cuser->parity);
- if (error) return error;
- PUT_USER(error,cnow.brk, &p_cuser->brk);
- if (error) return error;
- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
- if (error) return error;
- return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}

+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ SLMP_INFO *info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
/*
* /proc fs routines....
*/
@@ -3909,6 +3903,7 @@ static const struct tty_operations ops = {
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = get_icount,
.proc_fops = &synclinkmp_proc_fops,
};

diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 0dff3bb..2ed6312 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
}


+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int rs_360_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ struct async_icount cnow;
+
+ local_irq_disable();
+ cnow = info->state->icount;
+ local_irq_enable();
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+
+ return 0;
+}
+
static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
return -ENODEV;

- if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (cmd != TIOCMIWAIT) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
return 0;
#endif

- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- local_irq_disable();
- cnow = info->state->icount;
- local_irq_enable();
- p_cuser = (struct serial_icounter_struct *) arg;
-/* error = put_user(cnow.cts, &p_cuser->cts); */
-/* if (error) return error; */
-/* error = put_user(cnow.dsr, &p_cuser->dsr); */
-/* if (error) return error; */
-/* error = put_user(cnow.rng, &p_cuser->rng); */
-/* if (error) return error; */
-/* error = put_user(cnow.dcd, &p_cuser->dcd); */
-/* if (error) return error; */
-
- put_user(cnow.cts, &p_cuser->cts);
- put_user(cnow.dsr, &p_cuser->dsr);
- put_user(cnow.rng, &p_cuser->rng);
- put_user(cnow.dcd, &p_cuser->dcd);
- return 0;

default:
return -ENOIOCTLCMD;
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index befc3a5..84c2a4d 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned
BT_DBG("TIOCMIWAIT");
break;

- case TIOCGICOUNT:
- BT_DBG("TIOCGICOUNT");
- break;
-
case TIOCGSERIAL:
BT_ERR("TIOCGSERIAL is not supported");
return -ENOIOCTLCMD;


\
 
 \ /
  Last update: 2010-09-16 20:09    [W:0.112 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site