lkml.org 
[lkml]   [2010]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: Reduce fOD to 200 kHz if possible
FromBen Nizette <>
DateWed, 15 Sep 2010 19:50:08 +1000

On 15/09/2010, at 6:59 PM, Haavard Skinnemoen wrote:

> Since the identification frequency was increased to 400 kHz, my
> ATSTK1000 board has not been able to initialize any MMC or SD cards.
> Reducing the identification mode frequency to 200 kHz fixes the problem.
>
> This is definitely a board-specific issue, probably due to weak pull-up
> resistor values, but this is the simplest fix I could come up with.

I wonder whether there's an Atmel reference schematic around with an incorrect resistor value on it, the only three people I know affected by this are myself, Hein Tibosch and you, all on AVR32. We've now submitted one fix each, mine was similar to yours [1] but there's been movement on Hein's more comprehensive patch recently [2]. I don't know who's supposed to be merging MMC patches atm, Chris Ball added on CC on a hunch.

--Ben.

[1] http://lkml.org/lkml/2010/1/1/85
[2] http://lkml.org/lkml/2010/9/2/494

\
 
 \ /
  Last update: 2010-09-15 11:53    [from the cache]
©2003-2010