lkml.org 
[lkml]   [2010]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PATCH 3/6 - direct-io: do not merge logically non-contiguous requests


On 08/06/2010 02:03 PM, Christoph Hellwig wrote:
> Something is deeply wrong here. Raw block device access has a 1:1
> mapping between logical and physical block numbers. They really should
> never be non-contiguous.

At least I did nothing I know about to break it :-)

As I mentioned just iozone using direct I/O (-I flag of iozone then
using O_DIRECT for the file) on a ext2 file-system.
The file system was coming clean out of mkfs the file was written with
iozone one step before the traced read run.

The only uncommon thing here might be the block device, which is a scsi
disk on our SAN servers (I'm running on s390) - so the driver in charge
is zfcp (drivers/s390/scsi/).
I could use dasd (drivers/s390/block) disks as well, but I have no
blktrace of them yet - what I already know is that they show a similar
cost increase. On monday I should be able to get machine resources to
verify that both disk types are affected.

Let me know if I can do anything else on my system to shed some light on
the matter.



--

Grüsse / regards, Christian Ehrhardt
IBM Linux Technology Center, System z Linux Performance
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-08-07 09:33    [W:0.071 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site