lkml.org 
[lkml]   [2010]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[34/34] ssb: Handle alternate SSPROM location
2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 9d1ac34ec3a67713308ae0883c3359c557f14d17 upstream.

In kernel Bugzilla #15825 (2 users), in a wireless mailing list thread
(http://lists.infradead.org/pipermail/b43-dev/2010-May/000124.html), and on a
netbook owned by John Linville
(http://marc.info/?l=linux-wireless&m=127230751408818&w=4), there are reports
of ssb failing to detect an SPROM at the normal location. After studying the
MMIO trace dump for the Broadcom wl driver, it was determined that the affected
boxes had a relocated SPROM.

This patch fixes all systems that have reported this problem.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/ssb/driver_chipcommon.c | 1 +
drivers/ssb/pci.c | 15 +++++++++++++--
2 files changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -235,6 +235,7 @@ void ssb_chipcommon_init(struct ssb_chip
return; /* We don't have a ChipCommon */
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -625,11 +625,22 @@ static int ssb_pci_sprom_get(struct ssb_
return -ENODEV;
}
if (bus->chipco.dev) { /* can be unavailible! */
- bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
- SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
+ /*
+ * get SPROM offset: SSB_SPROM_BASE1 except for
+ * chipcommon rev >= 31 or chip ID is 0x4312 and
+ * chipcommon status & 3 == 2
+ */
+ if (bus->chipco.dev->id.revision >= 31)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else if (bus->chip_id == 0x4312 &&
+ (bus->chipco.status & 0x03) == 2)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else
+ bus->sprom_offset = SSB_SPROM_BASE1;
} else {
bus->sprom_offset = SSB_SPROM_BASE1;
}
+ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);

buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)



\
 
 \ /
  Last update: 2010-08-06 21:05    [W:0.113 / U:0.252 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site