Messages in this thread | | | Date | Wed, 4 Aug 2010 10:19:34 +0200 | From | martin f krafft <> | Subject | Failing to read drive: "Very big device. Trying to use READ CAPACITY(16)" |
| |
Dear kernel people,
We are trying to access the harddrive of a decomissioned laptop. It's a Western Digital Scorpio Blue 320Gb SATA drive (WD3200BEVT¹, 625,142,448 sectors).
When we attach it via USB, however, the kernel fails to read its size and assumes it's 2**32 blocks long (2 TiB):
kernel: [ 2466.318829] scsi 9:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS kernel: [ 2466.319359] sd 9:0:0:0: Attached scsi generic sg9 type 0 kernel: [ 2466.323641] sd 9:0:0:0: [sdh] Very big device. Trying to use READ CAPACITY(16). kernel: [ 2466.325387] sd 9:0:0:0: [sdh] Using 0xffffffff as device size kernel: [ 2466.325395] sd 9:0:0:0: [sdh] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB) kernel: [ 2466.326060] sd 9:0:0:0: [sdh] Write Protect is off kernel: [ 2466.326063] sd 9:0:0:0: [sdh] Mode Sense: 00 38 00 00 kernel: [ 2466.326066] sd 9:0:0:0: [sdh] Assuming drive cache: write through kernel: [ 2466.333816] sdh: unknown partition table kernel: [ 2466.360579] sd 9:0:0:0: [sdh] Attached SCSI disk
If we attach it directly to the SATA bus, it is not detected.
Is there anything we can do, or is this drive simply lost?
¹) http://www.wdc.com/en/products/Products.asp?DriveID=377
-- martin | http://madduck.net/ | http://two.sentenc.es/ who's general failure, and why's he reading my disk? spamtraps: madduck.bogus@madduck.net [unhandled content-type:application/pgp-signature] | |