lkml.org 
[lkml]   [2010]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush
    Tejun Heo wrote:
    > Hello,
    >
    > On 08/18/2010 09:30 PM, Vladislav Bolkhovitin wrote:
    >> Basically, I measured how iSCSI link utilization depends from amount
    >> of queued commands and queued data size. This is why I made it as a
    >> table. From it you can see which improvement you will have removing
    >> queue draining after 1, 2, 4, etc. commands depending of commands
    >> sizes.
    >>
    >> For instance, on my previous XFS rm example, where rm of 4 files
    >> took 3.5 minutes with nobarrier option, I could see that XFS was
    >> sending 1-3 32K commands in a row. From my table you can see that if
    >> it sent all them at once without draining, it would have about
    >> 150-200% speed increase.
    >
    > You compared barrier off/on. Of course, it will make a big
    > difference. I think good part of that gain should be realized by the
    > currently proposed patchset which removes draining. What's needed to
    > be demonstrated is the difference between ordered-by-waiting and
    > ordered-by-tag. We've never had code to do that properly.
    >
    > The original ordered-by-tag we had only applied tag ordering to two or
    > three command sequences inside a barrier, which doesn't amount to much
    > (and could even be harmful as it imposes draining of all simple
    > commands inside the device only to reduce issue latencies for a few
    > commands). You'll need to hook into filesystem and somehow export the
    > ordering information down to the driver so that whatever needs
    > ordering is sent out as ordered commands.
    >
    > As I've wrote multiple times, I'm pretty skeptical it will bring much.
    > Ordered tag mandates draining inside the device just like the original
    > barrier implementation. Sure, it's done at a lower layer and command
    > issue latencies will be reduced thanks to that but ordered-by-waiting
    > doesn't require _any_ draining at all. The whole pipeline can be kept
    > full all the time. I'm often wrong tho, so please feel free to go
    > ahead and prove me wrong. :-)
    >
    Actually, I thought about ordered tag writes, too.
    But eventually I had to give up on this for a simple reason:
    Ordered tag controls the ordering on the SCSI _TARGET_. But for a
    meaningful implementation we need to control the ordering all the way
    down from ->queuecommand(). Which means we have three areas we need
    to cover here:
    - driver (ie between ->queuecommand() and passing it off to the firmware)
    - firmware
    - fabric

    Sadly, the latter two are really hard to influence. And, what's more,
    with the new/modern CNAs with multiple queues and possible multiple
    routes to the target it becomes impossible to guarantee ordering.
    So using ordered tags for FibreChannel is not going to work, which
    makes implementing it a bit of a pointless exercise for me.

    Cheers,

    Hannes
    --
    Dr. Hannes Reinecke zSeries & Storage
    hare@suse.de +49 911 74053 688
    SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
    GF: Markus Rex, HRB 16746 (AG Nürnberg)
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2010-08-30 11:57    [W:4.159 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site