lkml.org 
[lkml]   [2010]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/24] msm: 8x60: gic initialization fixup for RUMI
Date
From: Steve Muckle <smuckle@codeaurora.org>

On RUMI platform STIs are not enabled by default, contrary to the
GIC spec. The bits for STIs in the enable/enable clear registers
are also RW instead of RO. STIs need to be enabled at initialization
time.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
---
arch/arm/mach-msm/board-msm8x60.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 3ab4bd9..c6bf8e3 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -18,6 +18,8 @@

#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -42,9 +44,28 @@ static void __init msm8x60_map_io(void)

static void __init msm8x60_init_irq(void)
{
+ unsigned int i;
+
gic_dist_init(0, MSM_QGIC_DIST_BASE, 1);
gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
gic_cpu_init(0, MSM_QGIC_CPU_BASE);
+
+ /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+ /* RUMI does not adhere to GIC spec by enabling STIs by default.
+ * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
+ */
+ writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+
+ /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
+ * as they are configured as level, which does not play nice with
+ * handle_percpu_irq.
+ */
+ for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
+ if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
+ set_irq_handler(i, handle_percpu_irq);
+ }
}

static void __init msm8x60_init(void)
--
1.7.2.1
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2010-08-25 07:03    [W:0.147 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site