lkml.org 
[lkml]   [2010]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] sh: Use the perf-events backend for oprofile
Date
Use the perf-events based wrapper for oprofile available in
drivers/oprofile. This allows us to centralise the code to control
performance counters.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
arch/sh/oprofile/Makefile | 4 ++
arch/sh/oprofile/common.c | 95 ++++++-------------------------------------
arch/sh/oprofile/op_impl.h | 33 ---------------
3 files changed, 18 insertions(+), 114 deletions(-)
delete mode 100644 arch/sh/oprofile/op_impl.h

diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 4886c5c..00ef946 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -6,4 +6,8 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
oprofilefs.o oprofile_stats.o \
timer_int.o )

+ifeq ($(CONFIG_PERF_EVENTS), y)
+DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o)
+endif
+
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index ac60493..b5b0d5e 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -17,73 +17,23 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>
#include <asm/processor.h>
-#include "op_impl.h"
-
-static struct op_sh_model *model;
-
-static struct op_counter_config ctr[20];

extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth);

-static int op_sh_setup(void)
-{
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr);
-
- /* Configure the registers on all cpus. */
- on_each_cpu(model->cpu_setup, NULL, 1);
-
- return 0;
-}
-
-static int op_sh_create_files(struct super_block *sb, struct dentry *root)
-{
- int i, ret = 0;
-
- for (i = 0; i < model->num_counters; i++) {
- struct dentry *dir;
- char buf[4];
-
- snprintf(buf, sizeof(buf), "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- ret |= oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- ret |= oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- ret |= oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- ret |= oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
- if (model->create_files)
- ret |= model->create_files(sb, dir);
- else
- ret |= oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-
- /* Dummy entries */
- ret |= oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- return ret;
-}
-
-static int op_sh_start(void)
+static char *op_name_from_perf_name(const char *name)
{
- /* Enable performance monitoring for all counters. */
- on_each_cpu(model->cpu_start, NULL, 1);
+ if (!strcmp(name, "SH-4A"))
+ return "sh/sh4a";
+ if (!strcmp(name, "SH7750"))
+ return "sh/sh7750";

- return 0;
-}
-
-static void op_sh_stop(void)
-{
- /* Disable performance monitoring for all counters. */
- on_each_cpu(model->cpu_stop, NULL, 1);
+ return NULL;
}

int __init oprofile_arch_init(struct oprofile_operations *ops)
{
- struct op_sh_model *lmodel = NULL;
- int ret;
-
/*
* Always assign the backtrace op. If the counter initialization
* fails, we fall back to the timer which will still make use of
@@ -91,40 +41,23 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
*/
ops->backtrace = sh_backtrace;

- /*
- * XXX
- *
- * All of the SH7750/SH-4A counters have been converted to perf,
- * this infrastructure hook is left for other users until they've
- * had a chance to convert over, at which point all of this
- * will be deleted.
- */
-
- if (!lmodel)
- return -ENODEV;
if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER))
return -ENODEV;

- ret = lmodel->init();
- if (unlikely(ret != 0))
- return ret;
-
- model = lmodel;
+ ops->setup = op_perf_setup;
+ ops->create_files = op_perf_create_files;
+ ops->start = op_perf_start;
+ ops->stop = op_perf_stop;
+ ops->cpu_type = op_name_from_perf_name(sh_pmu_name());

- ops->setup = op_sh_setup;
- ops->create_files = op_sh_create_files;
- ops->start = op_sh_start;
- ops->stop = op_sh_stop;
- ops->cpu_type = lmodel->cpu_type;
+ op_perf_set_num_counters(sh_pmu_num_events());

printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- lmodel->cpu_type);
+ ops->cpu_type);

return 0;
}

void oprofile_arch_exit(void)
{
- if (model && model->exit)
- model->exit();
}
diff --git a/arch/sh/oprofile/op_impl.h b/arch/sh/oprofile/op_impl.h
deleted file mode 100644
index 1244479..0000000
--- a/arch/sh/oprofile/op_impl.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __OP_IMPL_H
-#define __OP_IMPL_H
-
-/* Per-counter configuration as set via oprofilefs. */
-struct op_counter_config {
- unsigned long enabled;
- unsigned long event;
-
- unsigned long count;
-
- /* Dummy values for userspace tool compliance */
- unsigned long kernel;
- unsigned long user;
- unsigned long unit_mask;
-};
-
-/* Per-architecture configury and hooks. */
-struct op_sh_model {
- void (*reg_setup)(struct op_counter_config *);
- int (*create_files)(struct super_block *sb, struct dentry *dir);
- void (*cpu_setup)(void *dummy);
- int (*init)(void);
- void (*exit)(void);
- void (*cpu_start)(void *args);
- void (*cpu_stop)(void *args);
- char *cpu_type;
- unsigned char num_counters;
-};
-
-/* arch/sh/oprofile/common.c */
-extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif /* __OP_IMPL_H */
--
1.7.2.1


\
 
 \ /
  Last update: 2010-08-23 12:49    [W:0.085 / U:14.684 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site