Messages in this thread | | | Date | Sun, 22 Aug 2010 15:54:51 -0400 | From | Jeff Garzik <> | Subject | Re: possible esata regression in 2.6.35 |
| |
On 08/21/2010 02:52 PM, Nicolas Jungers wrote: > My arm box doesn't succeed to use my esata port multiplier (addonics > sil3726 based). It was working well with 2.6.34.1 and 2.6.34.4 but not > with both 2.6.35.2 and 2.6.35.3. I haven't test other kernels. > > The kernels are from http://sheeva.with-linux.com/sheeva/ with for > example the following config > http://sheeva.with-linux.com/sheeva/2.6.35.3/sheeva-2.6.35.3.config > > The symptoms are in the console a loop on the esata links. Here is the > start of it: > > ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen > ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect > ata2: SError: { PHYRdyChg DevExch } > ata2: hard resetting link > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) > ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
Can you post or link to the entire dmesg?
Notably, we need to see the probe messages to determine what SATA chip you are using... From the edma_err_cause config I'd guess sata_mv, but more info would be useful.
Jeff
| |