[lkml]   [2010]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [BUG] object: is not initialized, yet kobject_put() is being called
    On Thu, 12 Aug 2010, Markus Trippelsdorf wrote:

    > On Thu, Aug 12, 2010 at 11:11:50AM +0200, Jiri Kosina wrote:
    > >
    > > Guys, could you please send me your .config with which you are
    > > experiencing the problem, so that I can try to reproduce it with it?
    > Attached.

    So I had to add support for HW of mine (SATA_VIA, PATA_VIA, disabled the
    radeon firmware stuff, and, most importantly, enabled UHCI, which is what
    is on machine I am using now for testing), and disconnect-connect cycle
    works nicely:

    usb 3-2: USB disconnect, address 3
    usb 3-2: new low speed USB device using uhci_hcd and address 4
    input: mouse USB mouse with wheel as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input6
    generic-usb 0003:05B8:3091.0004: input,hidraw0: USB HID v1.10 Mouse [mouse USB mouse with wheel] on usb-0000:00:10.1-2/input0
    input: mouse USB mouse with wheel as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input7
    generic-usb 0003:05B8:3091.0005: input,hidraw1: USB HID v1.10 Keyboard [mouse USB mouse with wheel] on usb-0000:00:10.1-2/input1

    so still no BUG from kobject refcounting, and the hidraw numbers are the
    same. The major difference seems to be that I am using UHCI and you have
    your HID devices connected through OHCI, is that correct?

    Alan, does the system you are seeing this bug on also have HID devices
    connected through OHCI?


    Jiri Kosina
    SUSE Labs, Novell Inc.

     \ /
      Last update: 2010-08-12 13:21    [W:0.023 / U:4.344 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site