Messages in this thread | | | Subject | RE: [PATCH 2/4] Low-level initialization for hsmmc controller on LogicPD's OMAP3 SOM and TORPEDO dev kits | Date | Wed, 11 Aug 2010 13:47:24 -0500 | From | "Jacob Tanenbaum" <> |
| |
-----Original Message----- From: Felipe Balbi [mailto:felipe.balbi@nokia.com] Sent: Wednesday, August 11, 2010 1:26 PM To: Jacob Tanenbaum Cc: linux@arm.linux.org.uk; linux-omap@vger.kernel.org; linux-kernel@vger.kernel.org; rmk@arm.linux.org.uk; tony@atomide.com Subject: Re: [PATCH 2/4] Low-level initialization for hsmmc controller on LogicPD's OMAP3 SOM and TORPEDO dev kits
Hi,
On Wed, Aug 11, 2010 at 06:31:35PM +0200, ext Jacob Tanenbaum wrote: >+#define OMAP3_TORPEDO_MMC_GPIO_WP (-EINVAL)
this one isn't used anywhere, why adding it ?
will fix
>+static struct regulator_init_data omap3logic_vmmc1 = { >+ .constraints = { >+ .name = "VMMC1", >+ .min_uV = 1850000, >+ .max_uV = 3150000, >+ .valid_modes_mask = REGULATOR_MODE_NORMAL >+ | REGULATOR_MODE_STANDBY, >+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE >+ | REGULATOR_CHANGE_MODE >+ | REGULATOR_CHANGE_STATUS, >+ }, >+ .num_consumer_supplies = 1, >+ .consumer_supplies = &omap3logic_vmmc1_supply, >+}; >+ >+ >+
one blank line only.
Will fix
>+ } else { >+ printk(KERN_ERR "%s(): unknown machine type\n", __func__); >+ return;
indentation is wrong.
Will fix
>+ omap2_hsmmc_init(board_mmc_info); >+ /* link regulators to MMC adapters */ >+ omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; >+} >+ >+ >+
one blank line only.
Will fix
> /* Ensure SDRC pins are mux'd for self-refresh */ >-/* omap_cfg_reg(H16_34XX_SDRC_CKE0); >- omap_cfg_reg(H17_34XX_SDRC_CKE1); >- omap_cfg_reg(SDRC_CKE0); >- omap_cfg_reg(SDRC_CKE1); */
this shouldn't even be here in the first place. :-)
I removed this code and made a mistake in the rebase, it is removed in patch 4 will fix
-- balbi
DefectiveByDesign.org
| |