lkml.org 
[lkml]   [2010]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/15] gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
Date
Presently the usable registers definitions on x86 are not contiguous
for kgdb. The x86 kgdb uses a case statement for the sparse register
accesses. The array which defines the registers (dbg_reg_def) should
not be used directly in order to safely work with sparse register
definitions.

Specifically there was a problem when gdb accesses ORIG_AX, which is
accessed only through the case statement.

This patch encodes register memory using the size information provided
from the debugger which avoids the need to look up the size of the
register. The dbg_set_reg() function always further validates the
inputs from the debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
---
kernel/debug/gdbstub.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 4ef9ddd..fc7b174 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -604,6 +604,7 @@ static void gdb_cmd_reg_set(struct kgdb_state *ks)
{
unsigned long regnum;
char *ptr = &remcom_in_buffer[1];
+ int i = 0;

kgdb_hex2long(&ptr, &regnum);
if (*ptr++ != '=' ||
@@ -612,7 +613,14 @@ static void gdb_cmd_reg_set(struct kgdb_state *ks)
error_packet(remcom_out_buffer, -EINVAL);
return;
}
- kgdb_hex2mem(ptr, (char *)gdb_regs, dbg_reg_def[regnum].size);
+ memset(gdb_regs, 0, sizeof(gdb_regs));
+ while (i < sizeof(gdb_regs) * 2)
+ if (hex_to_bin(ptr[i]) >= 0)
+ i++;
+ else
+ break;
+ i = i / 2;
+ kgdb_hex2mem(ptr, (char *)gdb_regs, i);
dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
strcpy(remcom_out_buffer, "OK");
}
--
1.6.4.rc1


\
 
 \ /
  Last update: 2010-07-30 21:23    [W:0.094 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site