lkml.org 
[lkml]   [2010]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[139/205] USB: xhci: Set Mult field in endpoint context correctly.
    2.6.34-stable review patch.  If anyone has any objections, please let us know.

    ------------------

    From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

    commit c30c791c946a14a03e87819eced562ed28711961 upstream.

    The bmAttributes field of the SuperSpeed Endpoint Companion Descriptor has
    different meanings, depending on the endpoint type. If the endpoint is
    isochronous, the bmAttributes field is the maximum number of packets
    within a service interval that this endpoint supports. If the endpoint is
    bulk, it's the number of stream IDs this endpoint supports.

    Only set the Mult field of the xHCI endpoint context using the
    bmAttributes field if the endpoint is isochronous, and the device is a
    SuperSpeed device.

    Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

    ---
    drivers/usb/host/xhci-mem.c | 5 +++--
    1 file changed, 3 insertions(+), 2 deletions(-)

    --- a/drivers/usb/host/xhci-mem.c
    +++ b/drivers/usb/host/xhci-mem.c
    @@ -582,7 +582,7 @@ static inline unsigned int xhci_get_endp
    return EP_INTERVAL(interval);
    }

    -/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
    +/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
    * High speed endpoint descriptors can define "the number of additional
    * transaction opportunities per microframe", but that goes in the Max Burst
    * endpoint context field.
    @@ -590,7 +590,8 @@ static inline unsigned int xhci_get_endp
    static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
    struct usb_host_endpoint *ep)
    {
    - if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp)
    + if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp ||
    + !usb_endpoint_xfer_isoc(&ep->desc))
    return 0;
    return ep->ss_ep_comp->desc.bmAttributes;
    }



    \
     
     \ /
      Last update: 2010-07-30 20:05    [W:0.023 / U:0.472 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site