lkml.org 
[lkml]   [2010]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] [resend] cyber2000fb: fix machine hang on module load
From
Date
Hello,
I was testing two CyberPro 2000 based PCI cards on x86 and the machine always
hanged completely when the cyber2000fb module was loaded. It seems that the
card hangs when some registers are accessed too quickly after writing RAMDAC
control register. With this patch, both card work.

Add delay after RAMDAC control register write to prevent hangs on module load.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- linux-2.6.35-rc2/drivers/video/cyber2000fb.c 2010-06-06 05:43:24.000000000 +0200
+++ linux-2.6.35-rc3/drivers/video/cyber2000fb.c 2010-07-25 18:20:47.000000000 +0200
@@ -436,6 +436,7 @@ static void cyber2000fb_write_ramdac_ctr
cyber2000fb_writeb(i | 4, 0x3cf, cfb);
cyber2000fb_writeb(val, 0x3c6, cfb);
cyber2000fb_writeb(i, 0x3cf, cfb);
+ udelay(1);
}

static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)

--
Ondrej Zary


\
 
 \ /
  Last update: 2010-07-27 15:31    [W:0.060 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site