lkml.org 
[lkml]   [2010]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH 15/15] staging/lirc: wire up Kconfig and Makefile bits
    Make the bits under staging/lirc/ buildable, and add a TODO note.

    Signed-off-by: Jarod Wilson <jarod@redhat.com>
    ---
    drivers/staging/Kconfig | 2 +
    drivers/staging/Makefile | 1 +
    drivers/staging/lirc/Kconfig | 110 +++++++++++++++++++++++++++++++++++++++++
    drivers/staging/lirc/Makefile | 19 +++++++
    drivers/staging/lirc/TODO | 8 +++
    5 files changed, 140 insertions(+), 0 deletions(-)
    create mode 100644 drivers/staging/lirc/Kconfig
    create mode 100644 drivers/staging/lirc/Makefile
    create mode 100644 drivers/staging/lirc/TODO

    diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
    index 9fc196d..fad88fb 100644
    --- a/drivers/staging/Kconfig
    +++ b/drivers/staging/Kconfig
    @@ -155,5 +155,7 @@ source "drivers/staging/tidspbridge/Kconfig"

    source "drivers/staging/quickstart/Kconfig"

    +source "drivers/staging/lirc/Kconfig"
    +
    endif # !STAGING_EXCLUDE_BUILD
    endif # STAGING
    diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
    index 26942aa..27bb127 100644
    --- a/drivers/staging/Makefile
    +++ b/drivers/staging/Makefile
    @@ -58,3 +58,4 @@ obj-$(CONFIG_EASYCAP) += easycap/
    obj-$(CONFIG_SOLO6X10) += solo6x10/
    obj-$(CONFIG_TIDSPBRIDGE) += tidspbridge/
    obj-$(CONFIG_ACPI_QUICKSTART) += quickstart/
    +obj-$(CONFIG_LIRC_STAGING) += lirc/
    diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
    new file mode 100644
    index 0000000..968c2ad
    --- /dev/null
    +++ b/drivers/staging/lirc/Kconfig
    @@ -0,0 +1,110 @@
    +#
    +# LIRC driver(s) configuration
    +#
    +menuconfig LIRC_STAGING
    + bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
    + help
    + Say Y here, and all supported Linux Infrared Remote Control IR and
    + RF receiver and transmitter drivers will be displayed. When paired
    + with a remote control and the lirc daemon, the receiver drivers
    + allow control of your Linux system via remote control.
    +
    +if LIRC_STAGING
    +
    +config LIRC_BT829
    + tristate "BT829 based hardware"
    + depends on LIRC_STAGING
    + help
    + Driver for the IR interface on BT829-based hardware
    +
    +config LIRC_ENE0100
    + tristate "ENE KB3924/ENE0100 CIR Port Reciever"
    + depends on LIRC_STAGING
    + help
    + This is a driver for CIR port handled by ENE KB3924 embedded
    + controller found on some notebooks.
    + It appears on PNP list as ENE0100.
    +
    +config LIRC_I2C
    + tristate "I2C Based IR Receivers"
    + depends on LIRC_STAGING
    + help
    + Driver for I2C-based IR receivers, such as those commonly
    + found onboard Hauppauge PVR-150/250/350 video capture cards
    +
    +config LIRC_IGORPLUGUSB
    + tristate "Igor Cesko's USB IR Receiver"
    + depends on LIRC_STAGING && USB
    + help
    + Driver for Igor Cesko's USB IR Receiver
    +
    +config LIRC_IMON
    + tristate "Legacy SoundGraph iMON Receiver and Display"
    + depends on LIRC_STAGING
    + help
    + Driver for the original SoundGraph iMON IR Receiver and Display
    +
    + Current generation iMON devices use the input layer imon driver.
    +
    +config LIRC_IT87
    + tristate "ITE IT87XX CIR Port Receiver"
    + depends on LIRC_STAGING
    + help
    + Driver for the ITE IT87xx IR Receiver
    +
    +config LIRC_ITE8709
    + tristate "ITE8709 CIR Port Receiver"
    + depends on LIRC_STAGING && PNP
    + help
    + Driver for the ITE8709 IR Receiver
    +
    +config LIRC_PARALLEL
    + tristate "Homebrew Parallel Port Receiver"
    + depends on LIRC_STAGING && !SMP
    + help
    + Driver for Homebrew Parallel Port Receivers
    +
    +config LIRC_SASEM
    + tristate "Sasem USB IR Remote"
    + depends on LIRC_STAGING
    + help
    + Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
    +
    +config LIRC_SERIAL
    + tristate "Homebrew Serial Port Receiver"
    + depends on LIRC_STAGING
    + help
    + Driver for Homebrew Serial Port Receivers
    +
    +config LIRC_SERIAL_TRANSMITTER
    + bool "Serial Port Transmitter"
    + default y
    + depends on LIRC_SERIAL
    + help
    + Serial Port Transmitter support
    +
    +config LIRC_SIR
    + tristate "Built-in SIR IrDA port"
    + depends on LIRC_STAGING
    + help
    + Driver for the SIR IrDA port
    +
    +config LIRC_STREAMZAP
    + tristate "Streamzap PC Receiver"
    + depends on LIRC_STAGING
    + help
    + Driver for the Streamzap PC Receiver
    +
    +config LIRC_TTUSBIR
    + tristate "Technotrend USB IR Receiver"
    + depends on LIRC_STAGING && USB
    + help
    + Driver for the Technotrend USB IR Receiver
    +
    +config LIRC_ZILOG
    + tristate "Zilog/Hauppauge IR Transmitter"
    + depends on LIRC_STAGING
    + help
    + Driver for the Zilog/Hauppauge IR Transmitter, found on
    + PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
    +endif
    diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
    new file mode 100644
    index 0000000..a019182
    --- /dev/null
    +++ b/drivers/staging/lirc/Makefile
    @@ -0,0 +1,19 @@
    +# Makefile for the lirc drivers.
    +#
    +
    +# Each configuration option enables a list of files.
    +
    +obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
    +obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o
    +obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o
    +obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
    +obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
    +obj-$(CONFIG_LIRC_IT87) += lirc_it87.o
    +obj-$(CONFIG_LIRC_ITE8709) += lirc_ite8709.o
    +obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
    +obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
    +obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
    +obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
    +obj-$(CONFIG_LIRC_STREAMZAP) += lirc_streamzap.o
    +obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o
    +obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
    diff --git a/drivers/staging/lirc/TODO b/drivers/staging/lirc/TODO
    new file mode 100644
    index 0000000..b6cb593
    --- /dev/null
    +++ b/drivers/staging/lirc/TODO
    @@ -0,0 +1,8 @@
    +- All drivers should either be ported to ir-core, or dropped entirely
    + (see drivers/media/IR/mceusb.c vs. lirc_mceusb.c in lirc cvs for an
    + example of a previously completed port).
    +
    +Please send patches to:
    +Jarod Wilson <jarod@wilsonet.com>
    +Greg Kroah-Hartman <greg@kroah.com>
    +
    --
    1.7.1.1
    --
    Jarod Wilson
    jarod@redhat.com



    \
     
     \ /
      Last update: 2010-07-27 01:37    [W:0.032 / U:30.332 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site