lkml.org 
[lkml]   [2010]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.35-rc6 to 2.6.32.16: JuJu firewire issues
Hi,
I bought a external harddrive with firewire and USB interfaces (IcyBOX IB-250StUE-B).
If I connect it to a desktop computer A I get kernel crash during boot (see
both attached dmesg-*.txt files).

Further, a laptop computer B is connected to A via firewire as well through
firewire-net module. I do not understand why but on computer B I see in dmesg
complains from firewire_sbp about the external drive physically connected to
computer A! Is that a bug or feature? Nevertheless, the host B cannot really
talk to the drive (see below snippet from 2.6.34.1 kernel on the laptop below
in the body of this email).

Sorry for mixing the two issue into a single email. Maybe this is because
of similar underlying issues? The desktop has 2 firewire ports and the laptop
also 2 ports. While taking into account that both have firewire_net inserted
into the running kernel and on both machines I see only firewire0 interface
and not additional firewire1 interface I wonder whether the kernels realizes
there are two physical ports on each computer and maybe it mixes together
some data or takes an action on the wrong port. You may think of my yesterdays
email as of yet another kernel crash and bug in JuJu firewire stack under subject
"2.6.31.14: firewire_net issue in generic_sync_sb_inodes".

Thanks for any clues,
Martin



firewire_core: created device fw0: GUID 00e018000305e5fc, S400
firewire_core: created device fw1: GUID 0011d80001762a80, S400
firewire_core: created device fw2: GUID 001b8c8000000105, S400
firewire_core: refreshed device fw0
firewire_net: firewire0: IPv4 over FireWire on device 00e018000305e5fc
usb 1-1: new low speed USB device using uhci_hcd and address 2
scsi2 : SBP-2 IEEE-1394
usb 1-1: New USB device found, idVendor=0458, idProduct=0036
usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1: Product: NetScroll + Mini Traveler
usb 1-1: Manufacturer: Genius
firewire_sbp2: fw2.0: logged in to LUN 0000 (0 retries)
scsi 2:0:0:0: Direct-Access-RBC JMicron HDD PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg2 type 14
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
firewire_sbp2: fw2.0: sbp2_scsi_abort
firewire_sbp2: fw2.0: sbp2_scsi_abort
sd 2:0:0:0: Device offlined - not ready after error recovery
sd 2:0:0:0: [sdb] Unhandled error code
sd 2:0:0:0: [sdb] Result: hostbyte=0x02 driverbyte=0x00
sd 2:0:0:0: [sdb] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 20 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
firewire_ohci: isochronous cycle inconsistent
firewire_sbp2: fw2.0: reconnected to LUN 0000 (0 retries)
firewire_core: refreshed device fw1
firewire_core: phy config: card 0, new root=ffc2, gap_count=7
firewire_sbp2: fw2.0: reconnected to LUN 0000 (0 retries)
firewire_ohci: isochronous cycle inconsistent
firewire_sbp2: fw2.0: reconnected to LUN 0000 (0 retries)
firewire_core: phy config: card 0, new root=ffc2, gap_count=7
firewire_sbp2: fw2.0: reconnected to LUN 0000 (0 retries)
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Result: hostbyte=0x02 driverbyte=0x00
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] START_STOP FAILED
sd 2:0:0:0: [sdb] Result: hostbyte=0x02 driverbyte=0x00
firewire_sbp2: released fw2.0, target 2:0:0
firewire_ohci: isochronous cycle inconsistent
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
firewire_ohci: isochronous cycle inconsistent
firewire_core: created device fw1: GUID 0011d80001762a80, S400
firewire_core: refreshed device fw1
Linux version 2.6.32.16-default (root@454pc) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #9 SMP Fri Jul 23 14:37:59 MEST 2010
Command line: root=/dev/md1 idebus=66 udev
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff40000 (usable)
BIOS-e820: 00000000cff40000 - 00000000cff4e000 (ACPI data)
BIOS-e820: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask E00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 base 220000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff40 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cff40000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cff40000 page 4k
kernel direct mapping tables up to cff40000 @ 10000-16000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ 14000-1e000
ACPI: RSDP 00000000000fb140 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cff40100 0004C (v01 A_M_I_ OEMXSDT 02000822 MSFT 00000097)
ACPI: FACP 00000000cff40290 000F4 (v03 A_M_I_ OEMFACP 02000822 MSFT 00000097)
ACPI: DSDT 00000000cff405d0 08586 (v01 A0754 A0754001 00000001 INTL 20060113)
ACPI: FACS 00000000cff4e000 00040
ACPI: APIC 00000000cff40390 00078 (v01 A_M_I_ OEMAPIC 02000822 MSFT 00000097)
ACPI: MCFG 00000000cff40410 0003C (v01 A_M_I_ OEMMCFG 02000822 MSFT 00000097)
ACPI: OEMB 00000000cff4e040 00081 (v01 A_M_I_ AMI_OEM 02000822 MSFT 00000097)
ACPI: HPET 00000000cff48b60 00038 (v01 A_M_I_ OEMHPET 02000822 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00018bade0] TEXT DATA BSS ==> [0001000000 - 00018bade0]
#3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#4 [00018bb000 - 00018bb28c] BRK ==> [00018bb000 - 00018bb28c]
#5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000cff40
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096846
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3817 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833400 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 255, address 0xfec10000, GSI 24-279
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 280
Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 24 pages/cpu @ffff880028200000 s68632 r8192 d21480 u524288
pcpu-alloc: s68632 r8192 d21480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065377
Kernel command line: root=/dev/md1 idebus=66 udev
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8181896k/9175040k available (4745k kernel code, 787656k absent, 204604k reserved, 3092k data, 484k init)
Hierarchical RCU implementation.
NR_IRQS:384
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2504.732 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5009.46 BogoMIPS (lpj=10018928)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Freeing SMP alternatives: 40k freed
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (20037.11 BogoMIPS).
xor: automatically using best checksumming function: generic_sse
generic_sse: 9308.000 MB/sec
xor: using function: generic_sse (9308.000 MB/sec)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - 82, should be 81 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfffc00-0xfbffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbfff800-0xfbfffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07]
pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883]
pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807]
pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483]
pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa41f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbffe800-0xfbffefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbfff400-0xfbfff4ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfe7fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10 64bit mmio: [0xfeaffc00-0xfeaffc7f]
pci 0000:04:00.1: supports D1
pci 0000:04:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfae00000-0xfaefffff]
pci 0000:04:00.1: bridge 64bit mmio pref: [0xfae00000-0xfaefffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
pci 0000:03:00.0: reg 18 io port: [0xd800-0xd8ff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:08:07.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
pci 0000:08:07.0: reg 14 io port: [0xec00-0xec7f]
pci 0000:08:07.0: supports D2
pci 0000:08:07.0: PME# supported from D2 D3hot D3cold
pci 0000:08:07.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1 2093 MB/s
raid6: int64x2 2307 MB/s
raid6: int64x4 1934 MB/s
raid6: int64x8 1437 MB/s
raid6: sse2x1 4583 MB/s
raid6: sse2x2 4801 MB/s
raid6: sse2x4 7415 MB/s
raid6: using algorithm sse2x4 (7415 MB/s)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0x290-0x297 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x480-0x4bf has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:07: iomem range 0xffa00000-0xffafffff has been reserved
system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:07: iomem range 0xffe00000-0xffefffff has been reserved
system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfc000000-0xfe7fffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:06
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: disabled
pci 0000:04:00.0: PREFETCH window: disabled
pci 0000:04:00.1: PCI bridge, secondary bus 0000:05
pci 0000:04:00.1: IO window: disabled
pci 0000:04:00.1: MEM window: disabled
pci 0000:04:00.1: PREFETCH window: 0x000000fae00000-0x000000faefffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0x2000-0x2fff
pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.2: PREFETCH window: 0x000000fae00000-0x000000faefffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.3: IO window: 0xd000-0xdfff
pci 0000:00:1c.3: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0400000-0x000000f05fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4: IO window: 0xc000-0xcfff
pci 0000:00:1c.4: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f0600000-0x000000f07fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: 0xe000-0xefff
pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0106 -> 0107)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:04:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:04:00.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfe7fffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:07: resource 1 mem: [0xf0000000-0xf03fffff]
pci_bus 0000:07: resource 2 pref mem [0xfaf00000-0xfaffffff]
pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 2 pref mem [0xfae00000-0xfaefffff]
pci_bus 0000:05: resource 2 pref mem [0xfae00000-0xfaefffff]
pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff]
pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 pref mem [0xf0600000-0xf07fffff]
pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
pci_bus 0000:08: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:08: resource 3 io: [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Intel AES-NI instructions are not detected.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
DLM (built Jul 21 2010 11:46:32) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.13)
msgmni has been set to 15982
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for ghash (ghash-generic)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 280 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 281 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.2: irq 282 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.3: irq 283 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.4: irq 284 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de01d3
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
nvidiafb: EDID found from BUS1
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
nvidiafb: unable to setup MTRR
Console: switching to colour frame buffer device 160x64
nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xD0000000)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000cff4e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000cff4e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
processor LNXCPU:01: registered as cooling_device1
ACPI: SSDT 00000000cff4e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
processor LNXCPU:02: registered as cooling_device2
ACPI: SSDT 00000000cff4e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
processor LNXCPU:03: registered as cooling_device3
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:1f.2: irq 285 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe900 irq 285
ata2: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe980 irq 285
ata3: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea00 irq 285
ata4: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea80 irq 285
ata5: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb00 irq 285
ata6: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb80 irq 285
Generic platform RAM MTD, (c) 2004 Simtec Electronics
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.16-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.16-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.16-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.16-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.16-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.16-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.16-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32.16-default uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
hda_codec: ALC888: BIOS auto-probing.
ALSA device list:
#0: HDA Intel at 0xfbff8000 irq 22
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
SCTP: Hash tables configured (established 65536 bind 65536)
rtc_cmos 00:03: setting system clock to 2010-07-23 15:39:14 UTC (1279899554)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
usb 1-5: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133
usb 1-5: New USB device found, idVendor=058f, idProduct=6362
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 058F312D81B1
usb 1-5: configuration #1 chosen from 1 choice
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: New USB device found, idVendor=0458, idProduct=003a
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: Optical Mouse
usb 8-1: Manufacturer: Genius
usb 8-1: configuration #1 chosen from 1 choice
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.2-1/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg3 type 5
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 479681773568
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 3232432128
md: ... autorun DONE.
md1: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 9:1.
Freeing unused kernel memory: 484k freed
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg4 type 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg5 type 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:1: [sde] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg6 type 0
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:3: Attached scsi generic sg7 type 0
sd 6:0:0:2: [sdf] Attached SCSI removable disk
sd 6:0:0:3: [sdg] Attached SCSI removable disk
usb-storage: device scan complete
udev: starting version 160
md0:
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sky2 driver version 1.25
sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC chip revision 2
sky2 0000:03:00.0: irq 286 for MSI/MSI-X
sky2 eth0: addr 00:1d:60:60:74:a1
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: irq 287 for MSI/MSI-X
sky2 eth1: addr 00:1d:60:60:70:92
unknown partition table
ohci1394 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: Node added: ID:BUS[0-00:1023] GUID[00e018000305e5fc]
ieee1394: Node added: ID:BUS[0-01:1023] GUID[001b8c8000000105]
ieee1394: Host added: ID:BUS[0-02:1023] GUID[0011d80001762a80]
scsi7 : SBP-2 IEEE-1394
EXT3 FS on md1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
ieee1394: sbp2: Error logging into SBP-2 device - failed
sbp2: probe of 001b8c8000000105-0 failed with error -16
BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
IP: [<ffffffffa005af32>] sbp2_update+0x1c/0x1f1 [sbp2]
PGD 22e926067 PUD 22e6d5067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/bus/ieee1394/drivers/sbp2/uevent
CPU 0
Modules linked in: sbp2 firewire_net firewire_ohci firewire_core ohci1394 ieee1394 sky2 i2c_i801
Pid: 1397, comm: knodemgrd_0 Not tainted 2.6.32.16-default #9 System Product Name
RIP: 0010:[<ffffffffa005af32>] [<ffffffffa005af32>] sbp2_update+0x1c/0x1f1 [sbp2]
RSP: 0018:ffff88022d101ca0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88022fab2ed0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: ffff88022f925048
RBP: ffff88022d101cc0 R08: ffff88022d100000 R09: ffff880028210340
R10: 0000000000000400 R11: 00000000000005fe R12: ffff88022f925000
R13: ffff88022f9250a8 R14: ffff88022e693340 R15: ffff88022e687400
FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000000000e0 CR3: 000000022eadc000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process knodemgrd_0 (pid: 1397, threadinfo ffff88022d100000, task ffff88022d1e6050)
Stack:
ffff88022d101cc0 ffffffff8104f5c3 ffffffffa005d628 ffff88022f925000
<0> ffff88022d101cf0 ffffffffa001d385 ffff88022e6d1800 ffffffffa001d339
<0> ffff88022d101d10 ffff88022e693340 ffff88022d101d50 ffffffff812ae68a
Call Trace:
[<ffffffff8104f5c3>] ? down+0x33/0x38
[<ffffffffa001d385>] update_pdrv+0x4c/0x79 [ieee1394]
[<ffffffffa001d339>] ? update_pdrv+0x0/0x79 [ieee1394]
[<ffffffff812ae68a>] class_for_each_device+0x6e/0x99
[<ffffffffa00181ef>] ? hpsb_free_packet+0x2c/0x2e [ieee1394]
[<ffffffffa001daca>] node_probe+0x286/0x304 [ieee1394]
[<ffffffffa001d844>] ? node_probe+0x0/0x304 [ieee1394]
[<ffffffff812ae68a>] class_for_each_device+0x6e/0x99
[<ffffffffa001f7d3>] ? csr1212_destroy_csr+0x51/0x59 [ieee1394]
[<ffffffffa001e271>] nodemgr_host_thread+0x729/0x8bc [ieee1394]
[<ffffffffa001db48>] ? nodemgr_host_thread+0x0/0x8bc [ieee1394]
[<ffffffff8104bc77>] kthread+0x7a/0x82
[<ffffffff8100c93a>] child_rip+0xa/0x20
[<ffffffff8104bbfd>] ? kthread+0x0/0x82
[<ffffffff8100c930>] ? child_rip+0x0/0x20
Code: 31 c0 48 83 c4 20 5b 41 5c 41 5d 41 5e c9 c3 55 48 83 c7 48 48 89 e5 41 54 53 48 83 ec 10 e8 30 29 25 e1 be 20 00 00 00 48 89 c3 <4c> 8b a0 e0 00 00 00 48 8b 40 50 c7 00 00 00 00 00 48 8b 43 50
RIP [<ffffffffa005af32>] sbp2_update+0x1c/0x1f1 [sbp2]
RSP <ffff88022d101ca0>
CR2: 00000000000000e0
---[ end trace 5f2aa54eef767b34 ]---
sky2 eth0: enabling interface
Adding 16787916k swap on /dev/sda2. Priority:-1 extents:1 across:16787916k
Adding 16787916k swap on /dev/sdb2. Priority:-2 extents:1 across:16787916k
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Linux version 2.6.35-rc6-default (root@454pc) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #1 SMP Fri Jul 23 15:29:50 MEST 2010
Command line: root=/dev/md1 idebus=66 udev
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff40000 (usable)
BIOS-e820: 00000000cff40000 - 00000000cff4e000 (ACPI data)
BIOS-e820: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask E00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 base 220000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff40 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-00000000cff40000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cff40000 page 4k
kernel direct mapping tables up to cff40000 @ 12000-18000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ 16000-20000
ACPI: RSDP 00000000000fb140 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cff40100 0004C (v01 A_M_I_ OEMXSDT 02000822 MSFT 00000097)
ACPI: FACP 00000000cff40290 000F4 (v03 A_M_I_ OEMFACP 02000822 MSFT 00000097)
ACPI: DSDT 00000000cff405d0 08586 (v01 A0754 A0754001 00000001 INTL 20060113)
ACPI: FACS 00000000cff4e000 00040
ACPI: APIC 00000000cff40390 00078 (v01 A_M_I_ OEMAPIC 02000822 MSFT 00000097)
ACPI: MCFG 00000000cff40410 0003C (v01 A_M_I_ OEMMCFG 02000822 MSFT 00000097)
ACPI: OEMB 00000000cff4e040 00081 (v01 A_M_I_ AMI_OEM 02000822 MSFT 00000097)
ACPI: HPET 00000000cff48b60 00038 (v01 A_M_I_ OEMHPET 02000822 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880002200000-ffff8800093fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000cff40
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096846
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3926 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833400 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 255, address 0xfec10000, GSI 24-279
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 296
early_res array is doubled to 64 at [1b000 - 1b7ff]
Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s76352 r8192 d21952 u524288
pcpu-alloc: s76352 r8192 d21952 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065486
Kernel command line: root=/dev/md1 idebus=66 udev
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Subtract (53 early reservations)
#1 [0001000000 - 000190b790] TEXT DATA BSS
#2 [000190c000 - 000190c28c] BRK
#3 [00000ff790 - 0000100000] BIOS reserved
#4 [00000ff780 - 00000ff790] MP-table mpf
#5 [000009ec00 - 00000f1540] BIOS reserved
#6 [00000f16fc - 00000ff780] BIOS reserved
#7 [00000f1540 - 00000f16fc] MP-table mpc
#8 [0000010000 - 0000012000] TRAMPOLINE
#9 [0000012000 - 0000016000] PGTABLE
#10 [0000016000 - 000001b000] PGTABLE
#11 [000190c2c0 - 000190d2c0] BOOTMEM
#12 [000190b7c0 - 000190bdc0] BOOTMEM
#13 [000210e000 - 000210f000] BOOTMEM
#14 [000210f000 - 0002110000] BOOTMEM
#15 [0002200000 - 0009400000] MEMMAP 0
#16 [000190bdc0 - 000190bf40] BOOTMEM
#17 [000190d2c0 - 00019252c0] BOOTMEM
#18 [00019252c0 - 000193d2c0] BOOTMEM
#19 [000193e000 - 000193f000] BOOTMEM
#20 [000190bf40 - 000190bf81] BOOTMEM
#21 [000193d2c0 - 000193d346] BOOTMEM
#22 [000193d380 - 000193d5e8] BOOTMEM
#23 [000193d600 - 000193d668] BOOTMEM
#24 [000193d680 - 000193d6e8] BOOTMEM
#25 [000193d700 - 000193d768] BOOTMEM
#26 [000193d780 - 000193d7e8] BOOTMEM
#27 [000193d800 - 000193d868] BOOTMEM
#28 [000193d880 - 000193d8e8] BOOTMEM
#29 [000193d900 - 000193d968] BOOTMEM
#30 [000193d980 - 000193d9e8] BOOTMEM
#31 [000193da00 - 000193da68] BOOTMEM
#32 [000193da80 - 000193dae8] BOOTMEM
#33 [000190bfc0 - 000190bfdd] BOOTMEM
#34 [000193db00 - 000193db1d] BOOTMEM
#35 [0001a00000 - 0001a1a000] BOOTMEM
#36 [0001a80000 - 0001a9a000] BOOTMEM
#37 [0001b00000 - 0001b1a000] BOOTMEM
#38 [0001b80000 - 0001b9a000] BOOTMEM
#39 [000193db40 - 000193db48] BOOTMEM
#40 [000193db80 - 000193db88] BOOTMEM
#41 [000193dbc0 - 000193dbd0] BOOTMEM
#42 [000193dc00 - 000193dc20] BOOTMEM
#43 [000193dc40 - 000193dd70] BOOTMEM
#44 [000193dd80 - 000193ddd0] BOOTMEM
#45 [000193de00 - 000193de50] BOOTMEM
#46 [000193f000 - 0001947000] BOOTMEM
#47 [0009400000 - 0009c00000] BOOTMEM
#48 [0001b9a000 - 0001f9a000] BOOTMEM
#49 [0009c00000 - 000dc00000] BOOTMEM
#50 [0001947000 - 0001967000] BOOTMEM
#51 [0001967000 - 00019a7000] BOOTMEM
#52 [000001b800 - 0000023800] BOOTMEM
Memory: 8182436k/9175040k available (4900k kernel code, 787656k absent, 204948k reserved, 3249k data, 508k init)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:384
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2504.638 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5009.27 BogoMIPS (lpj=10018552)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (20037.10 BogoMIPS).
xor: automatically using best checksumming function: generic_sse
generic_sse: 9290.000 MB/sec
xor: using function: generic_sse (9290.000 MB/sec)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cff4e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cff4e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cff4e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cff4e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: reg 10: [mem 0xfbfffc00-0xfbffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: reg 10: [mem 0xfbfff800-0xfbfffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xfbffe800-0xfbffefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfbfff400-0xfbfff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xfeaffc00-0xfeaffc7f 64bit]
pci 0000:04:00.1: supports D1
pci 0000:04:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-06]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.2: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 06-06]
pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.1: PCI bridge to [bus 05-05]
pci 0000:04:00.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:04:00.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:04:00.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
pci 0000:03:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:03:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
pci 0000:02:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:07.0: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:08:07.0: reg 14: [io 0xec00-0xec7f]
pci 0000:08:07.0: supports D2
pci 0000:08:07.0: PME# supported from D2 D3hot D3cold
pci 0000:08:07.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1 2090 MB/s
raid6: int64x2 2283 MB/s
raid6: int64x4 1950 MB/s
raid6: int64x8 1391 MB/s
raid6: sse2x1 4590 MB/s
raid6: sse2x2 4802 MB/s
raid6: sse2x4 7406 MB/s
raid6: using algorithm sse2x4 (7406 MB/s)
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 00000000cff40000 - 00000000cfffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0480-0x04bf] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.3: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfe000000-0xfe01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 06-06]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem disabled]
pci 0000:04:00.0: bridge window [mem pref disabled]
pci 0000:04:00.1: PCI bridge to [bus 05-05]
pci 0000:04:00.1: bridge window [io disabled]
pci 0000:04:00.1: bridge window [mem disabled]
pci 0000:04:00.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-06]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.2: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0106 -> 0107)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:04:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:04:00.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf03fffff]
pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
pci_bus 0000:05: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880009c00000 - ffff88000dc00000
software IO TLB at phys 0x9c00000 - 0xdc00000
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Intel AES-NI instructions are not detected.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
DLM (built Jul 23 2010 15:21:25) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.14)
msgmni has been set to 15981
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 296 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 297 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 298 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 299 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 300 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de01d3
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
nvidiafb: EDID found from BUS1
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
nvidiafb: unable to setup MTRR
Console: switching to colour frame buffer device 160x64
nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xD0000000)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:1f.2: irq 301 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe900 irq 301
ata2: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe980 irq 301
ata3: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea00 irq 301
ata4: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea80 irq 301
ata5: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb00 irq 301
ata6: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb80 irq 301
mtdoops: mtd device (mtddev=name/number) must be supplied
Generic platform RAM MTD, (c) 2004 Simtec Electronics
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-rc6-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-rc6-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 302 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
hda_codec: ALC888: BIOS auto-probing.
ALSA device list:
#0: HDA Intel at 0xfbff8000 irq 302
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
SCTP: Hash tables configured (established 65536 bind 65536)
rtc_cmos 00:03: setting system clock to 2010-07-23 15:35:13 UTC (1279899313)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
usb 1-5: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
usb 1-5: New USB device found, idVendor=058f, idProduct=6362
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 058F312D81B1
scsi6 : usb-storage 1-5:1.0
scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: New USB device found, idVendor=0458, idProduct=003a
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: Optical Mouse
usb 8-1: Manufacturer: Genius
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.2-1/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:1: [sdd] Attached SCSI removable disk
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdg] Write Protect is off
sd 2:0:0:0: Attached scsi generic sg6 type 0
sd 2:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1
sd 2:0:0:0: [sdg] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg7 type 5
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 479681773568
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 3232432128
md: ... autorun DONE.
md1: detected capacity change from 0 to 479681773568
md1: unknown partition table
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (md1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 9:1.
Freeing unused kernel memory: 508k freed
udev: starting version 160
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [irq 1024-1039 pref]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
md0: unknown partition table
sky2: driver version 1.28
sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC chip revision 2
sky2 0000:03:00.0: irq 303 for MSI/MSI-X
sky2 0000:03:00.0: eth0: addr 00:1d:60:60:74:a1
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: irq 304 for MSI/MSI-X
sky2 0000:02:00.0: eth1: addr 00:1d:60:60:70:92
ohci1394 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: Node added: ID:BUS[0-00:1023] GUID[00e018000305e5fc]
ieee1394: Node added: ID:BUS[0-01:1023] GUID[001b8c8000000105]
ieee1394: Host added: ID:BUS[0-02:1023] GUID[0011d80001762a80]
scsi7 : SBP-2 IEEE-1394
EXT3-fs (md1): using internal journal
ieee1394: sbp2: Error logging into SBP-2 device - failed
sbp2: probe of 001b8c8000000105-0 failed with error -16
BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
IP: [<ffffffffa005af3b>] sbp2_update+0x1c/0x1f1 [sbp2]
PGD 22eb14067 PUD 22d872067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/bus/ieee1394/drivers/sbp2/uevent
CPU 3
Modules linked in: sbp2 firewire_net firewire_ohci firewire_core ohci1394 ieee1394 sky2 i2c_i801

Pid: 1408, comm: knodemgrd_0 Not tainted 2.6.35-rc6-default #1 P5K WS/System Product Name
RIP: 0010:[<ffffffffa005af3b>] [<ffffffffa005af3b>] sbp2_update+0x1c/0x1f1 [sbp2]
RSP: 0018:ffff88022c9a5ca0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88022ef06dd0
RDX: ffff88022d8400b0 RSI: 0000000000000020 RDI: ffff88022d840048
RBP: ffff88022c9a5cc0 R08: ffff88022c9a4000 R09: ffffffff00000001
R10: 0000000000000282 R11: ffff88022d23da98 R12: ffff88022d840000
R13: ffff88022d8400a8 R14: ffff88022d04acc0 R15: ffff88022ea83000
FS: 0000000000000000(0000) GS:ffff880001b80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000e0 CR3: 000000022eb28000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process knodemgrd_0 (pid: 1408, threadinfo ffff88022c9a4000, task ffff88022fd25230)
Stack:
ffff88022c9a5cc0 ffffffff814c52a8 ffffffffa005d608 ffff88022d840000
<0> ffff88022c9a5cf0 ffffffffa00303f5 ffff88022d842c00 ffffffffa00303a9
<0> ffff88022c9a5d10 ffff88022d04acc0 ffff88022c9a5d50 ffffffff812c1945
Call Trace:
[<ffffffff814c52a8>] ? mutex_lock+0x16/0x2d
[<ffffffffa00303f5>] update_pdrv+0x4c/0x79 [ieee1394]
[<ffffffffa00303a9>] ? update_pdrv+0x0/0x79 [ieee1394]
[<ffffffff812c1945>] class_for_each_device+0x6e/0x99
[<ffffffffa002b1fc>] ? hpsb_free_packet+0x2c/0x2e [ieee1394]
[<ffffffffa0030b3c>] node_probe+0x289/0x307 [ieee1394]
[<ffffffffa00308b3>] ? node_probe+0x0/0x307 [ieee1394]
[<ffffffff812c1945>] class_for_each_device+0x6e/0x99
[<ffffffffa003288b>] ? csr1212_destroy_csr+0x51/0x59 [ieee1394]
[<ffffffffa0031323>] nodemgr_host_thread+0x769/0x902 [ieee1394]
[<ffffffffa0030bba>] ? nodemgr_host_thread+0x0/0x902 [ieee1394]
[<ffffffff81047737>] kthread+0x7a/0x82
[<ffffffff81003614>] kernel_thread_helper+0x4/0x10
[<ffffffff810476bd>] ? kthread+0x0/0x82
[<ffffffff81003610>] ? kernel_thread_helper+0x0/0x10
Code: 31 c0 48 83 c4 20 5b 41 5c 41 5d 41 5e c9 c3 55 48 83 c7 48 48 89 e5 41 54 53 48 83 ec 10 e8 77 5b 26 e1 be 20 00 00 00 48 89 c3 <4c> 8b a0 e0 00 00 00 48 8b 40 50 c7 00 00 00 00 00 48 8b 43 50
RIP [<ffffffffa005af3b>] sbp2_update+0x1c/0x1f1 [sbp2]
RSP <ffff88022c9a5ca0>
CR2: 00000000000000e0
---[ end trace 6b85c94fd5786882 ]---
sky2 0000:03:00.0: eth0: enabling interface
Adding 16787920k swap on /dev/sda2. Priority:-1 extents:1 across:16787920k
Adding 16787920k swap on /dev/sdb2. Priority:-2 extents:1 across:16787920k
sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
\
 
 \ /
  Last update: 2010-07-23 16:11    [W:0.113 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site