lkml.org 
[lkml]   [2010]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH 1/3] DMAENGINE: generic slave channel control
> On Mon, Jul 19, 2010 at 3:44 PM, Linus Walleij
> <linus.ml.walleij@gmail.com> wrote:
> > 2010/7/19 Dan Williams <dan.j.williams@intel.com>:
> >
> >> The recently submitted intel_mid driver [1] seems to have a similar structure:
> >
> > This is very interesting, let's examine this closely as a comparison!
> > I'm looking at it from the point of a generic slave control mechanism,
> > though I suspect it is designed to be Intel-specific so keep that in mind.
> >
> >> +/**
> >> + * struct intel_mid_dma_slave - DMA slave structure
> >> + *
> >> + * @dma_dev: DMA master client
> >> + * @tx_reg: physical address of data register used for
> >> + *     memory-to-peripheral transfers
> >> + * @rx_reg: physical address of data register used for
> >> + *     peripheral-to-memory transfers
> >> + * @tx_width: tx register width
> >> + * @rx_width: rx register width
> >> + * @dirn: DMA trf direction
> >> + * @cfg_hi: Platform-specific initializer for the CFG_HI register
> >> + * @cfg_lo: Platform-specific initializer for the CFG_LO register
> >> + * @ tx_width: width of src and dstn
> >> + * @ hs_mode: SW or HW handskaking mode
> >> + * @ cfg_mode: Mode configuration, DMA mem to mem to dev & mem
> >> + */
> >> +struct intel_mid_dma_slave {
> >> +       enum dma_data_direction         dirn;
> >> +       enum intel_mid_dma_width        src_width; /*width of DMA src txn*/
> >> +       enum intel_mid_dma_width        dst_width; /*width of DMA dst txn*/
> >> +       enum intel_mid_dma_hs_mode      hs_mode;  /*handshaking*/
> >> +       enum intel_mid_dma_mode         cfg_mode; /*mode configuration*/
> >> +       enum intel_mid_dma_msize        src_msize; /*size if src burst*/
> >> +       enum intel_mid_dma_msize        dst_msize; /*size of dst burst*/
> >> +       dma_async_tx_callback           callback; /*callback function*/
> >> +       void                            *callback_param; /*param for callback*/
> >> +       unsigned int            device_instance; /*0, 1 for periphral instance*/
> >> +};
> >> +
> >
> > kerneldoc and struct members seem to be out-of-sync but I
> > see the general idea.
> >
> > Of these members handshaking, cfg_mode, hs_mode
> > and I suspect also device_instance are candidates for
> > the private config  since they cannot be assumed to
> > exist on all DMA engines. (Also goes for cfg_[lo|hi] from
> > the kerneldoc)
> >
> > The callback and callback param are configured
> > per-transfer in the current API, so I don't see what they
> > are doing here at all.
>
> Yeah, I already pointed that out...
This is my current structure which I was hoping to submit upstream this week
after my testing on various controllers was complete
/**
* struct intel_mid_dma_slave - DMA slave structure
*
* @dirn: DMA trf direction
* @src_width: tx register width
* @dst_width: rx register width
* @hs_mode: HW/SW handshaking mode
* @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
* @src_msize: Source DMA burst size
* @dst_msize: Dst DMA burst size
* @device_instance: DMA peripheral device instance, we can have multiple
* peripheral device connected to single DMAC
*/
struct intel_mid_dma_slave {
enum dma_data_direction dirn;
enum intel_mid_dma_width src_width; /*width of DMA src txn*/
enum intel_mid_dma_width dst_width; /*width of DMA dst txn*/
enum intel_mid_dma_hs_mode hs_mode; /*handshaking*/
enum intel_mid_dma_mode cfg_mode; /*mode configuration*/
enum intel_mid_dma_msize src_msize; /*size if src burst*/
enum intel_mid_dma_msize dst_msize; /*size of dst burst*/
unsigned int device_instance; /*0, 1 for peripheral instance*/
};

>
> >
> > Remains: direction, then register address, burstsize and
> > word width of the source and destination.
> >
> > (Register address present in kerneldoc but not in struct,
> > burstsize present in struct but not in kerneldoc, whatever)
> >
> > I don't have src/dst pairs in my API, because since the
> > only data provision mechanisms to slaves are sglists,
> > and these provide either source or destination address
> > depending on transfer direction.
> >
> > Also I assume that since sglists will be mem->peripheral
> > or peripheral->mem, you know what is required on the
> > memory side of things for word width and burstsize, and
> > these only affect the device side of things.
> >
> > So that is why my API is more minimalistic.
> >
> > If you feel src/dst versions of wordwidth, register address
> > and burstsize are a must, I can add them, no big thing,
> > just makes for some nonused parameters, mostly.
>
> Unused parameters is what I want to avoid, and getting drivers that
> can wrap dma_slave_config to actually do so is the final kicker.
>
> Thoughts Vinod?
Yes the structures have various common things and would be good to abstract
generic stuff in this and move the rest to private_config.
But since we are talking about a generic DMA slave capabilities structure, I
would recommend changing few.

I am not sure why do you want the I/O addr to be passed here, sorry I
don't follow that logic. If you notice in intel_mid_dma driver the I/O address
is passed by client driver in prep_memcpy in src and dst fields. Since the slave
structure tell you the direction and mode you can interpret that src/dst address
as IO address easily

Addr_width and Maxburst: talks about the I/O width and msize I guess, but what
about mem-width, I have few configuration where we would like to have different
mem width as well.
And why limit the generic API and what about per-per transfers which
intel_mid_dma driver would need to support in future.
I would recommend renaming this field to src_addr_width etc and add dst_addr_xxx
pair.

Yes I can have them in private_config but then again driver has to do a simple
check on which one is src/dst in slave and which one is in privae_config. Again
easily doable but little confusing, I am okay either way

Thanks
Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-07-20 05:47    [W:1.570 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site