lkml.org 
[lkml]   [2010]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH[RFC] Quirk macbook pro 6,2 into ahci mode
On Sun, Jul 18, 2010 at 10:03:44AM -0600, Jens Axboe wrote:

> So while the below works, it doesn't work when the laptop is
> coming out of suspend. I can't seem to find out why, since it's
> a bit hard to debug when you are on the road. What happens is
> that it comes back with a bit of a delay, and then the disks are
> apparently gone. I've tried adding a resume quirk to re-AHCI the
> thing, but it doesn't help.

You'll certainly need to re-quirk on resume, since there's no guarantee
that the firmware will do it for you. My suspicion is that it comes up
in PATA mode with legacy firmware in order to improve compatibility with
XP, and you'd have ahci if you booted through EFI. I don't have
something handy to test that right now, though.

> Looking at the specs, I don't see what I am missing to make this
> work for resume. I'm assuming that EFI did initialize some bits
> that am missing when coming out of resume, but I don't know which
> bits.

There's no guarantee that the AHCI BAR is programmed by the firmware (it
seems to be on the Macs, but won't be on most hardware). Is it getting
reprogrammed on resume?

--
Matthew Garrett | mjg59@srcf.ucam.org


\
 
 \ /
  Last update: 2010-07-18 20:45    [W:0.046 / U:19.688 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site