lkml.org 
[lkml]   [2010]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PPC64/Power7 - 2.6.35-rc5] Bad relocation warnings while Building a CONFIG_RELOCATABLE kernel with CONFIG_ISERIES enabled
From
Date
On Thu, 2010-07-15 at 17:05 +0530, Subrata Modak wrote:
> commit e62cee42e66dcca83aae02748535f62e0f564a0c solved the problem for
> 2.6.34-rc6. However some other bad relocation warnings generated against
> 2.6.35-rc5 on Power7/ppc64 below:
>
> MODPOST 2004 modules^M
> WARNING: 2 bad relocations^M
> c000000000008590 R_PPC64_ADDR32 .text+0x4000000000008460^M
> c000000000008594 R_PPC64_ADDR32 .text+0x4000000000008598^M

I think this is KVM + CONFIG_RELOCATABLE. Caused by:

.global kvmppc_trampoline_lowmem
kvmppc_trampoline_lowmem:
.long kvmppc_handler_lowmem_trampoline - CONFIG_KERNEL_START

.global kvmppc_trampoline_enter
kvmppc_trampoline_enter:
.long kvmppc_handler_trampoline_enter - CONFIG_KERNEL_START

Alex, can you turn these into 64-bit on ppc64 so the relocator
can grok them ?

Cheers,
Ben.

> Config file attached.
>
> Regards--
> Subrata
>
> On Fri, 2010-05-07 at 15:40 +1000, Paul Mackerras wrote:
> > On Wed, May 05, 2010 at 05:20:51PM +0530, Subrata Modak wrote:
> >
> > > I built 2.6.34-rc6 with the attached Fedora Config file
> > > (config-2.6.33.1-19.fc13.ppc64) on my P5 Fedora Box and got the
> > > following warning. Is the following expected ?
> > >
> > > CALL arch/powerpc/relocs_check.pl
> > > Building modules, stage 2.
> > > WARNING: 4 bad relocations
> > > c00000000007216e R_PPC64_ADDR16_HIGHEST __ksymtab+0x00000000009dcec8
> > > c000000000072172 R_PPC64_ADDR16_HIGHER __ksymtab+0x00000000009dcec8
> > > c00000000007217a R_PPC64_ADDR16_HI __ksymtab+0x00000000009dcec8
> > > c00000000007217e R_PPC64_ADDR16_LO __ksymtab+0x00000000009dcec8
> >
> > No, it's not expected. It's in iSeries code, so you could avoid it
> > just by disabling CONFIG_ISERIES (I don't think any distro still
> > supports legacy iSeries). I'll post a patch to fix the problem
> > properly.
> >
> > Paul.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev




\
 
 \ /
  Last update: 2010-07-19 03:15    [W:0.057 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site