lkml.org 
[lkml]   [2010]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 07/11] scsi: ultrastor: formatting of pointers in printk()
    Date
    Use %p instead of %08x in printk().

    Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
    ---
    drivers/scsi/ultrastor.c | 12 ++++++------
    1 files changed, 6 insertions(+), 6 deletions(-)

    diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
    index 27aa40f..4715b7c 100644
    --- a/drivers/scsi/ultrastor.c
    +++ b/drivers/scsi/ultrastor.c
    @@ -1061,7 +1061,7 @@ static void ultrastor_interrupt(void *dev_id)
    mscp = (struct mscp *)isa_bus_to_virt(inl(config.icm_address));
    mscp_index = mscp - config.mscp;
    if (mscp_index >= ULTRASTOR_MAX_CMDS) {
    - printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
    + printk("Ux4F interrupt: bad MSCP address %p\n", mscp);
    /* A command has been lost. Reset and report an error
    for all commands. */
    ultrastor_host_reset(dev_id);
    @@ -1074,8 +1074,8 @@ static void ultrastor_interrupt(void *dev_id)
    unsigned char icm_status = inb(config.icm_address - 1);
    #if ULTRASTOR_DEBUG & (UD_INTERRUPT|UD_ERROR|UD_ABORT)
    if (icm_status != 1 && icm_status != 2)
    - printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
    - mscp_index, (unsigned int) mscp);
    + printk("US24F: ICM status %x for MSCP %d (%p)\n", icm_status,
    + mscp_index, mscp);
    #endif
    /* The manual says clear interrupt then write 0 to ICM status.
    This seems backwards, but I'll do it anyway. --jfc */
    @@ -1104,7 +1104,7 @@ static void ultrastor_interrupt(void *dev_id)
    if (!SCtmp)
    {
    #if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
    - printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
    + printk("MSCP %d (%p): no command\n", mscp_index, mscp);
    #endif
    #if ULTRASTOR_MAX_CMDS == 1
    config.mscp_busy = FALSE;
    @@ -1154,8 +1154,8 @@ static void ultrastor_interrupt(void *dev_id)

    #if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
    if (config.aborted[mscp_index])
    - printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
    - mscp_index, (unsigned int) mscp, config.aborted[mscp_index]);
    + printk("Ux4 interrupt: MSCP %d (%p) aborted = %d\n",
    + mscp_index, mscp, config.aborted[mscp_index]);
    #endif
    config.aborted[mscp_index] = 0;

    --
    1.7.0.4


    \
     
     \ /
      Last update: 2010-07-14 20:07    [W:0.050 / U:0.192 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site