lkml.org 
[lkml]   [2010]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] ux500: add ab8500-regulators machine specific data
On Wed, Jul 14, 2010 at 08:20:54PM +0530, Sundar R IYER wrote:

> > > + .name = "ab8500-vaudio",
> > > + .min_uV = 1925000,
> > > + .max_uV = 2075000,

> > Are you *sure* that all these constraints are accurate for the board?

> As far as the min/max values of the voltage go, yes they are as per the
> data sheet.

Which datasheet, and will the system design actually be varying them at
runtime - if it will how will it do so? This is the settings for the
particular system and generally a lot of these rails will get fixed at
design time for various reasons (for example, the analogue supplies will
usually depend on the analogue system design).

> > It seems every single voltage is variable even though there are no
> > consumers set up, and they can all be disabled too.

> Yes. all these regulators can be disabled/enabled. does this answer your
> qeury? ( or i didnt understand it properly??)

Again, is it really the case that this will happen in this system?
Nothing is currently able to actually do that, and unless every consumer
using a given supply is hooked into the regulator API things will go
wrong when some of them start doing so.


\
 
 \ /
  Last update: 2010-07-14 17:01    [W:0.080 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site