lkml.org 
[lkml]   [2010]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/4] omap_hsmmc: Add erase capability
From 8aa6d3d17e2a0d768163072e3f919e03162a2df9 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 18 May 2010 17:33:13 +0300
Subject: [PATCH 4/4] omap_hsmmc: Add erase capability

Disable the data (busy) timeout for erases and set the
MMC_CAP_ERASE capability.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 13 ++++++++++---
1 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index b032828..5cbbe09 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/core.h>
+#include <linux/mmc/mmc.h>
#include <linux/io.h>
#include <linux/semaphore.h>
#include <linux/gpio.h>
@@ -78,6 +79,7 @@
#define INT_EN_MASK 0x307F0033
#define BWR_ENABLE (1 << 4)
#define BRR_ENABLE (1 << 5)
+#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
@@ -523,7 +525,8 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host)
dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
}

-static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host)
+static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
+ struct mmc_command *cmd)
{
unsigned int irq_mask;

@@ -532,6 +535,10 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host)
else
irq_mask = INT_EN_MASK;

+ /* Disable timeout for erases */
+ if (cmd->opcode == MMC_ERASE)
+ irq_mask &= ~DTO_ENABLE;
+
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
@@ -782,7 +789,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
host->cmd = cmd;

- omap_hsmmc_enable_irq(host);
+ omap_hsmmc_enable_irq(host, cmd);

host->response_busy = 0;
if (cmd->flags & MMC_RSP_PRESENT) {
@@ -2094,7 +2101,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
mmc->max_seg_size = mmc->max_req_size;

mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_WAIT_WHILE_BUSY;
+ MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;

if (mmc_slot(host).wires >= 8)
mmc->caps |= MMC_CAP_8_BIT_DATA;
--
1.6.3.3

\
 
 \ /
  Last update: 2010-06-03 23:17    [W:0.029 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site