lkml.org 
[lkml]   [2010]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.6.35-rc3 regression: IBM Maia system is unbootable [ACPI related?]
From
Date
On Mon, 2010-06-28 at 23:49 -0400, Len Brown wrote:
> From: Len Brown <len.brown@intel.com>
> Subject: [PATCH] ACPI: handle systems which asynchoronously enable ACPI mode
>
> Folklore suggested that such systems existed
> in the pre-history of ACPI.
>
> However, we removed the SCI_EN polling loop from
> acpi_hw_set_mode() in b430acbd7c4b919886fa7fd92eeb7a695f1940d3
> because it delayed resume by 3 seconds on boxes
> that refused to set SCI_EN.
>
> Matthew removed the call to acpi_enable() from
> the suspend resume path.
>
> James found a modern system that still needs to be polled
> upon boot.
>
> So here we restore the workaround, except that we
> put it in acpi_enable() rather than the low level
> acpi_hw_set_mode().
>
> https://bugzilla.kernel.org/show_bug.cgi?id=16271
>
> Signed-off-by: Len Brown <len.brown@intel.com>
> ---
>
> James, What does the IBM system see with this patch?

The output is this:

[ 0.084088] ACPI: Core revision 20100428
[ 0.119451] ACPI Warning: Platform took > 100 usec to enter ACPI mode (20100428/evxfevnt-106)
[ 0.128231] Setting APIC routing to physical flat

So it's very fast ... actually it's behaving like there's some caching
issue and it needs two reads to return the correct value

James




\
 
 \ /
  Last update: 2010-06-29 18:51    [W:0.747 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site