lkml.org 
[lkml]   [2010]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH/RFC 4/4] hwmon: sysfs API updates
    Date
    Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
    ---
    Documentation/hwmon/sysfs-interface | 27 ++++++++++++++++++++++-----
    1 files changed, 22 insertions(+), 5 deletions(-)

    diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
    index d4e2917..b183d94 100644
    --- a/Documentation/hwmon/sysfs-interface
    +++ b/Documentation/hwmon/sysfs-interface
    @@ -421,11 +421,12 @@ power[1-*]_accuracy Accuracy of the power meter.
    Unit: Percent
    RO

    -power[1-*]_alarm 1 if the system is drawing more power than the
    - cap allows; 0 otherwise. A poll notification is
    - sent to this file when the power use exceeds the
    - cap. This file only appears if the cap is known
    - to be enforced by hardware.
    +power[1-*]_alarm 1 if the system is drawing more power than cap
    + or max allows; 0 otherwise. A poll notification
    + is sent to this file when the power use exceeds
    + the cap or max limit. If only cap is supported,
    + this file only appears if the cap is known to be
    + enforced by hardware.
    RO

    power[1-*]_cap If power use rises above this limit, the
    @@ -450,6 +451,18 @@ power[1-*]_cap_min Minimum cap that can be set.
    Unit: microWatt
    RO

    +power[1-*]_max Maximum power.
    + Unit: microWatt
    + RW
    +
    +power[1-*]_crit Critical maximum power.
    + If power rises to or above this limit, the
    + system will take drastic action to reduce power
    + consumption, such as a system shutdown. At the
    + very least, a power fault will be generated.
    + Unit: microWatt
    + RO
    +
    **********
    * Energy *
    **********
    @@ -471,6 +484,7 @@ limit-related alarms, not both. The driver should just reflect the hardware
    implementation.

    in[0-*]_alarm
    +power[1-*]_alarm
    fan[1-*]_alarm
    temp[1-*]_alarm
    Channel alarm
    @@ -482,6 +496,8 @@ OR

    in[0-*]_min_alarm
    in[0-*]_max_alarm
    +power[1-*]_min_alarm
    +power[1-*]_max_alarm
    fan[1-*]_min_alarm
    fan[1-*]_max_alarm
    temp[1-*]_min_alarm
    @@ -498,6 +514,7 @@ supports it. When this boolean has value 1, the measurement for that
    channel should not be trusted.

    in[0-*]_fault
    +power[1-*]_fault
    fan[1-*]_fault
    temp[1-*]_fault
    Input fault condition
    --
    1.7.0.87.g0901d


    \
     
     \ /
      Last update: 2010-06-29 00:01    [W:0.036 / U:0.508 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site