lkml.org 
[lkml]   [2010]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ata link not reset properly
Hello,

On 06/26/2010 06:07 AM, Robert Hancock wrote:
> Ahh, ok, it's not sata_nv at all then, it's pata_amd. On the same chip,
> totally different controller though.
>
> PATA doesn't normally use hard-resets as a means of error recovery -
> that would mean hitting the RESET line, which I don't think most
> controllers can do on software command (it usually only gets asserted on
> power up or hitting the reset button), unlike on SATA where there's a
> defined way to trigger a COMRESET which is mostly equivalent. Also, that
> resets both devices on the channel, unlike soft reset which is specific
> to one device.

Yeah, if it's pata_amd and SRST isn't recovering the device, there
isn't much else to do. :-(

Thanks.

--
tejun


\
 
 \ /
  Last update: 2010-06-26 10:07    [W:0.219 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site