lkml.org 
[lkml]   [2010]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/4] hwmon: Update sysfs-interface to include new attributes
Date
Added _lcrit and _crit to voltage attributes. 
Added _lcrit to temperature attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
Documentation/hwmon/sysfs-interface | 21 ++++++++++++++++++++-
1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index d4e2917..7f60c0d 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -107,10 +107,24 @@ in[0-*]_min Voltage min value.
Unit: millivolt
RW

+in[0-*]_lcrit Voltage critical min value.
+ Unit: millivolt
+ RW
+ If voltage drops to or below this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_max Voltage max value.
Unit: millivolt
RW

+in[0-*]_crit Voltage critical max value.
+ Unit: millivolt
+ RW
+ If voltage reaches or exceeds this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_input Voltage input value.
Unit: millivolt
RO
@@ -284,11 +298,16 @@ temp[1-*]_input Temperature input value.
Unit: millidegree Celsius
RO

-temp[1-*]_crit Temperature critical value, typically greater than
+temp[1-*]_crit Temperature critical max value, typically greater than
corresponding temp_max values.
Unit: millidegree Celsius
RW

+temp[1-*]_lcrit Temperature critical min value, typically lower than
+ corresponding temp_min values.
+ Unit: millidegree Celsius
+ RW
+
temp[1-*]_crit_hyst
Temperature hysteresis value for critical limit.
Unit: millidegree Celsius
--
1.7.0.87.g0901d


\
 
 \ /
  Last update: 2010-06-25 00:09    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site