lkml.org 
[lkml]   [2010]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.35-rc3 E-MU 0404 USB problem
On Tue, Jun 22, 2010 at 06:11:02AM -0700, Greg KH wrote:
> On Tue, Jun 22, 2010 at 01:58:12PM +0100, Sid Boyce wrote:
> > I have an application using the on-board sound card mic which should
> > send it's data to the USB card for relay to a Sofweare Defined Radio
> > as 2 quadrature signals digital (I/Q) for transmission.
> > On the receiving side it can take data from the Radio at up to 192K
> > sample rate --> program --> Speaker on the on-board sound card -
> > that works fine.
> > Transmit fails, dmesg output with 48K sample rate set is:-
> > [509686.177169] ALSA sound/usb/clock.c:214: 6:2:3: endpoint lacks
> > sample rate attribute bit, cannot set.
> > [509686.187920] ALSA sound/usb/clock.c:214: 6:2:1: endpoint lacks
> > sample rate attribute bit, cannot set.
>
> Looks like your device does not support this :(
>
> Have you asked on the alsa mailing list?

Yes, please post this on the ALSA list, and also provide the full output
of "lsusb -v" with the device connected.

Thanks,
Daniel


\
 
 \ /
  Last update: 2010-06-22 15:37    [W:1.117 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site