lkml.org 
[lkml]   [2010]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.6.35-rc3 regression: IBM Maia system is unbootable [ACPI related?]
From
Date
On Mon, 2010-06-21 at 11:33 -0500, James Bottomley wrote:
> On Mon, 2010-06-21 at 18:18 +0200, Andi Kleen wrote:
> > James Bottomley <James.Bottomley@HansenPartnership.com> writes:
> >
> > > The system in question has a set of root bridges, with the CD rom (which
> > > is seen) being on bus 0 and the SCSI controller, which doesn't show up
> > > being on bus 1 (with several other things on busses > 1).
> > >
> > > The system uses ACPI to detect the multiple bridges, so it seems that
> > > this failure in 2.6.35-rc3:
> > >
> > > ACPI: Core revision 20100428
> > > ACPI Error: Hardware did not enter ACPI mode (20100428/evxfevnt-103)
> > > ACPI Warning: AcpiEnable failed (20100428/utxface-147)
> > > ACPI: Unable to enable ACPI
> >
> > That probably causes all the other problems. Without ACPI enabled
> > modern systems generally do not work.
> >
> > Just guessing, but maybe try to revert
> >
> > b430acbd7c4b919886fa7fd92eeb7a695f1940d3
> >
> > That was the last change in this area.
>
> I can confirm that reverting this over a vanilla 2.6.35-rc3 fixes my
> boot problem.

Andi asked for the timings with the commit reverted, so here they are
(from ACPI version print to PCI root busses found):

[ 0.084086] ACPI: Core revision 20100428
[ 0.119779] Setting APIC routing to physical flat
[ 0.124259] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.128000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.128000] ..... (found apic 0 pin 2) ...
[ 0.128000] ....... failed.
[ 0.128000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.169681] ..... works.
[ 0.172005] CPU0: Intel(R) Xeon(TM) MP CPU 3.16GHz stepping 01
[ 0.188000] lockdep: fixing up alternatives.
[ 0.188133] Booting Node 0, Processors #1 Ok.
[ 0.288089] Brought up 2 CPUs
[ 0.292006] Total of 2 processors activated (12676.86 BogoMIPS).
[ 0.300923] khelper used greatest stack depth: 5864 bytes left
[ 0.305017] khelper used greatest stack depth: 5176 bytes left
[ 0.325510] NET: Registered protocol family 16
[ 0.341322] ACPI: bus type pci registered
[ 0.344474] PCI: Using configuration type 1 for base access
[ 0.359165] bio: create slab <bio-0> at 0
[ 0.478153] ACPI: Interpreter enabled
[ 0.488006] ACPI: (supports S0 S5)
[ 0.497875] ACPI: Using IOAPIC for interrupt routing
[ 0.548145] ACPI: No dock devices found.
[ 0.552176] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.556263] ACPI: PCI Root Bridge [VP00] (domain 0000 [bus 00])
[ 0.568051] ACPI: PCI Root Bridge [VP01] (domain 0000 [bus 01])
[ 0.576336] ACPI: PCI Root Bridge [VP02] (domain 0000 [bus 02-03])
[ 0.596889] ACPI: PCI Root Bridge [VP03] (domain 0000 [bus 04-05])
[ 0.605222] ACPI: PCI Root Bridge [VP04] (domain 0000 [bus 06-07])
[ 0.613530] ACPI: PCI Root Bridge [VP05] (domain 0000 [bus 08-09])
[ 0.617658] ACPI: PCI Root Bridge [VP06] (domain 0000 [bus 0a-0b])
[ 0.621672] ACPI: PCI Root Bridge [VP07] (domain 0000 [bus 0c-0d])
[ 0.625948] HEST: Table is not found!
James




\
 
 \ /
  Last update: 2010-06-21 18:57    [from the cache]
©2003-2011 Jasper Spaans