lkml.org 
[lkml]   [2010]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCHv7 07/11] USB: gadget: g_ether: updated INF file
    Updated the INF file for the g_ether gadget.  It should work with most
    recent Windows systems now.

    Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    ---
    Documentation/usb/linux.inf | 228 +++++++++----------------------------------
    1 files changed, 47 insertions(+), 181 deletions(-)

    diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
    index 8e7e793..b9e538c 100644
    --- a/Documentation/usb/linux.inf
    +++ b/Documentation/usb/linux.inf
    @@ -1,200 +1,66 @@
    -; MS-Windows driver config matching some basic modes of the
    -; Linux-USB Ethernet/RNDIS gadget firmware:
    -;
    -; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
    -; cable modem profile, and supports most non-Microsoft USB hosts
    -;
    -; - RNDIS plus CDC Subset ... used by hardware that incapable of
    -; full CDC Ethernet support.
    -;
    -; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
    -; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
    -; http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
    -
    +; Based on template INF file found at
    +; <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
    +; which was:
    +; Copyright (c) Microsoft Corporation
    +; and released under the MLPL as found at:
    +; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
    +; For use only on Windows operating systems.

    [Version]
    -Signature = "$CHICAGO$"
    +Signature = "$Windows NT$"
    Class = Net
    ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
    Provider = %Linux%
    -Compatible = 1
    -MillenniumPreferred = .ME
    -DriverVer = 03/30/2004,0.0.0.0
    -; catalog file would be used by WHQL
    -;CatalogFile = Linux.cat
    +DriverVer = 06/21/2006,6.0.6000.16384

    [Manufacturer]
    -%Linux% = LinuxDevices,NT.5.1
    +%Linux% = LinuxDevices,NTx86,NTamd64,NTia64
    +
    +; Decoration for x86 architecture
    +[LinuxDevices.NTx86]
    +%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2

    -[LinuxDevices]
    -; NetChip IDs, used by both firmware modes
    -%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
    +; Decoration for x64 architecture
    +[LinuxDevices.NTamd64]
    +%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2

    -[LinuxDevices.NT.5.1]
    -%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
    +; Decoration for ia64 architecture
    +[LinuxDevices.NTia64]
    +%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2

    +;@@@ This is the common setting for setup
    [ControlFlags]
    ExcludeFromSelect=*

    -; Windows 98, Windows 98 Second Edition specific sections --------
    -
    -[RNDIS]
    -DeviceID = usb8023
    -MaxInstance = 512
    -DriverVer = 03/30/2004,0.0.0.0
    -AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
    -
    -[RNDIS_AddReg_98]
    -HKR, , DevLoader, 0, *ndis
    -HKR, , DeviceVxDs, 0, usb8023.sys
    -HKR, NDIS, LogDriverName, 0, "usb8023"
    -HKR, NDIS, MajorNdisVersion, 1, 5
    -HKR, NDIS, MinorNdisVersion, 1, 0
    -HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
    -HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
    -HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
    -HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
    -HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
    -HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
    -HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
    -HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
    -
    -[RNDIS_Install_98]
    -CopyFiles=RNDIS_CopyFiles_98
    -
    -[RNDIS_CopyFiles_98]
    -usb8023.sys, usb8023w.sys, , 0
    -rndismp.sys, rndismpw.sys, , 0
    -
    -; Windows Millennium Edition specific sections --------------------
    -
    -[RNDIS.ME]
    -DeviceID = usb8023
    -MaxInstance = 512
    -DriverVer = 03/30/2004,0.0.0.0
    -AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
    -Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
    -BusType = 15
    -
    -[RNDIS_AddReg_ME]
    -HKR, , DevLoader, 0, *ndis
    -HKR, , DeviceVxDs, 0, usb8023.sys
    -HKR, NDIS, LogDriverName, 0, "usb8023"
    -HKR, NDIS, MajorNdisVersion, 1, 5
    -HKR, NDIS, MinorNdisVersion, 1, 0
    -HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
    -HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
    -HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
    -HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
    -HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
    -HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
    -HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
    -HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
    -
    -[RNDIS_Install_ME]
    -CopyFiles=RNDIS_CopyFiles_ME
    -
    -[RNDIS_CopyFiles_ME]
    -usb8023.sys, usb8023m.sys, , 0
    -rndismp.sys, rndismpm.sys, , 0
    -
    -; Windows 2000 specific sections ---------------------------------
    -
    -[RNDIS.NT]
    -Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
    -BusType = 15
    -DriverVer = 03/30/2004,0.0.0.0
    -AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
    -CopyFiles = RNDIS_CopyFiles_NT
    -
    -[RNDIS.NT.Services]
    -AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
    -
    -[RNDIS_CopyFiles_NT]
    -; no rename of files on Windows 2000, use the 'k' names as is
    -usb8023k.sys, , , 0
    -rndismpk.sys, , , 0
    -
    -[RNDIS_ServiceInst_NT]
    -DisplayName = %ServiceDisplayName%
    -ServiceType = 1
    -StartType = 3
    -ErrorControl = 1
    -ServiceBinary = %12%\usb8023k.sys
    -LoadOrderGroup = NDIS
    -AddReg = RNDIS_WMI_AddReg_NT
    -
    -[RNDIS_WMI_AddReg_NT]
    -HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
    -
    -; Windows XP specific sections -----------------------------------
    -
    +; DDInstall section
    +; References the in-build Netrndis.inf
    [RNDIS.NT.5.1]
    -Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
    -BusType = 15
    -DriverVer = 03/30/2004,0.0.0.0
    -AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
    -; no copyfiles - the files are already in place
    -
    +Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
    +BusType = 15
    +; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
    +include = netrndis.inf
    +needs = Usb_Rndis.ndi
    +AddReg = Rndis_AddReg_Vista
    +
    +; DDInstal.Services section
    [RNDIS.NT.5.1.Services]
    -AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
    -
    -[RNDIS_ServiceInst_51]
    -DisplayName = %ServiceDisplayName%
    -ServiceType = 1
    -StartType = 3
    -ErrorControl = 1
    -ServiceBinary = %12%\usb8023.sys
    -LoadOrderGroup = NDIS
    -AddReg = RNDIS_WMI_AddReg_51
    -
    -[RNDIS_WMI_AddReg_51]
    -HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
    -
    -; Windows 2000 and Windows XP common sections --------------------
    -
    -[RNDIS_AddReg_NT]
    -HKR, Ndi, Service, 0, "USB_RNDIS"
    -HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
    -HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
    -
    -[RNDIS_EventLog]
    -AddReg = RNDIS_EventLog_AddReg
    -
    -[RNDIS_EventLog_AddReg]
    -HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
    -HKR, , TypesSupported, 0x00010001, 7
    -
    -; Common Sections -------------------------------------------------
    -
    -[RNDIS_AddReg_Common]
    -HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
    -HKR, NDI\params\NetworkAddress, type, 0, "edit"
    -HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
    -HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
    -HKR, NDI\params\NetworkAddress, default, 0, " "
    -HKR, NDI\params\NetworkAddress, optional, 0, "1"
    -
    -[SourceDisksNames]
    -1=%SourceDisk%,,1
    -
    -[SourceDisksFiles]
    -usb8023m.sys=1
    -rndismpm.sys=1
    -usb8023w.sys=1
    -rndismpw.sys=1
    -usb8023k.sys=1
    -rndismpk.sys=1
    -
    -[DestinationDirs]
    -RNDIS_CopyFiles_98 = 10, system32/drivers
    -RNDIS_CopyFiles_ME = 10, system32/drivers
    -RNDIS_CopyFiles_NT = 12
    +include = netrndis.inf
    +needs = Usb_Rndis.ndi.Services
    +
    +; Optional registry settings. You can modify as needed.
    +[RNDIS_AddReg_Vista]
    +HKR, NDI\params\VistaProperty, ParamDesc, 0, %Vista_Property%
    +HKR, NDI\params\VistaProperty, type, 0, "edit"
    +HKR, NDI\params\VistaProperty, LimitText, 0, "12"
    +HKR, NDI\params\VistaProperty, UpperCase, 0, "1"
    +HKR, NDI\params\VistaProperty, default, 0, " "
    +HKR, NDI\params\VistaProperty, optional, 0, "1"
    +
    +; No sys copyfiles - the sys files are already in-build
    +; (part of the operating system).
    +; We do not support XP SP1-, 2003 SP1-, ME, 9x.

    [Strings]
    -ServiceDisplayName = "USB Remote NDIS Network Device Driver"
    -NetworkAddress = "Network Address"
    Linux = "Linux Developer Community"
    LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
    -SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
    -
    +Vista_Property = "Optional Vista Property"
    --
    1.7.1


    \
     
     \ /
      Last update: 2010-06-21 13:59    [W:4.695 / U:0.328 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site