lkml.org 
[lkml]   [2010]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] tty: Add EXTPROC support for LINEMODE
Howard Chu wrote:
>>> diff --git a/arch/alpha/include/asm/termbits.h b/arch/alpha/include/asm/termbits.h
>>> index ad854a4..879dd35 100644
>>> --- a/arch/alpha/include/asm/termbits.h
>>> +++ b/arch/alpha/include/asm/termbits.h
>>> @@ -180,6 +180,7 @@ struct ktermios {
>>> #define FLUSHO 0x00800000
>>> #define PENDIN 0x20000000
>>> #define IEXTEN 0x00000400
>>> +#define EXTPROC 0x10000000
>>
>> For Alpha this value should match OSF if possible.
>
> I'm grubbing around looking for a live Alpha system now, doesn't seem likely
> that I'll find one. Not sure what needs to match here, it's also unlikely that
> OSF/1 (or any other SVR4 platform) ever provided a definition for this bit.
> Looking at the telnet README:
> >>>>
> This is a distribution of both client and server telnet. These programs
> have been compiled on:
> telnet telnetd
> BSD 4.4 x x
> BSD 4.3 Reno X X
> UNICOS 8.0 X X
> UNICOS 7.C X X
> UNICOS 7.0 X X
> UNICOS 6.1 X X
> BSDI 1.0 X X
> Solaris 2.2 x x (no linemode in server)
> Solaris 2.3 x x (no linemode in server)
> SunOs 4.1.3 X X (no linemode in server)
> Ultrix 4.3 X X (no linemode in server)
> DYNIX V3.0.17.9 X X (no linemode in server)
> HP-UX 8.0 x x (no linemode in server)
> <<<<
>
> I doubt that anyone ever ported this feature over to those OSes.

Closest thing I've found so far is for HPUX 11i Version 2:
http://docs.hp.com/en/B2355-90848docs/B2355-90848docs.pdf

>>>>
TIOCREMOTE This ioctl puts the STREAMS pty in and out of Remote Mode. When
Remote Mode is on, input data will be flow-controlled and passed
through ldterm without any input processing regardless of the
terminal mode. When the pty master driver receives this ioctl,
it will send an M_CTL message downstream to ldterm via ptm, pts,
and ptem. The command in the M_CTL message is set to MC_NO_CANON
or MC_DO_CANON depending whether to turn on or off the Remote
Mode. The format of this ioctl is:
int ioctl(master_fd, TIOCREMOTE, argument)
where the argument is set to 1 to turn on Remote Mode and 0 to
turn it off. Remote Mode is normally used when doing remote line
editing in a window manager, or whenever flow-controlled input is
required. Each write to the master device produces a record
boundary for the process reading the slave devices. In normal
usage, a write of data is like the data typed as a line on the
terminal; a write of 0 (zero) bytes is like typing an EOF
(End-of-File) character.

TIOCSIGNAL This ioctl allows the master process to send a signal to the slave
process. The format of this ioctl is:


int ioctl(master_fd, TIOCSIGNAL, argument)
where the argument is the signal number as defined in the header
file <sys/signal.h>. For example the master process can send an
SIGINT signal to the slave process by doing:
ioctl(master_fd, TIOCSIGNAL, SIGINT)
<<<<

TIOCREMOTE seems to be the SVR4 analogue to TIOCPKT without any of the useful
parts; it doesn't include the prefix byte, so it doesn't provide any state
change information.

--
-- Howard Chu
CTO, Symas Corp. http://www.symas.com
Director, Highland Sun http://highlandsun.com/hyc/
Chief Architect, OpenLDAP http://www.openldap.org/project/


\
 
 \ /
  Last update: 2010-06-15 22:27    [W:0.095 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site