lkml.org 
[lkml]   [2010]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [PATCH] Topcliff PHUB: Generate PacketHub driver
    Hi we have modified for your comments.
    Please Confirm below.

    Thanks.
    Ohtake.


    Signed-off-by: Masayuki Ohtake <masa-korg@dsn.okisemi.com>
    ---
    linux-2.6.33.1/drivers/char/Kconfig | 25 +
    linux-2.6.33.1/drivers/char/Makefile | 4 +
    linux-2.6.33.1/drivers/char/pch_phub/Makefile | 11 +
    linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c | 1000 +++++++++++++++++++++++
    linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h | 87 ++
    5 files changed, 1127 insertions(+), 0 deletions(-)
    create mode 100644 linux-2.6.33.1/drivers/char/pch_phub/Makefile
    create mode 100755 linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c
    create mode 100755 linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h

    diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
    index e023682..285ce78 100644
    --- a/drivers/char/Kconfig
    +++ b/drivers/char/Kconfig
    @@ -4,6 +4,31 @@

    menu "Character devices"

    +config PCH_IEEE1588
    + tristate "PCH IEEE1588"
    + depends on PCI
    + help
    + If you say yes to this option, support will be included for the
    + PCH IEEE1588 Host controller.
    +
    +config PCH_PHUB
    + tristate "PCH PHUB"
    + depends on PCI
    + help
    + If you say yes to this option, support will be included for the
    + PCH Packet Hub Host controller.
    + This driver is for PCH Packet hub driver for Topcliff.
    + This driver is integrated as built-in.
    + This driver can access GbE MAC address.
    + This driver can access HW register.
    + You can also be integrated as module.
    +
    +config PCH_CAN_PCLK_50MHZ
    + bool "CAN PCLK 50MHz"
    + depends on PCH_PHUB
    + help
    + If you say yes to this option, clock is set to 50MHz.(For CAN control)
    +
    config VT
    bool "Virtual terminal" if EMBEDDED
    depends on !S390
    diff --git a/drivers/char/Makefile b/drivers/char/Makefile
    index f957edf..dc092d0 100644
    --- a/drivers/char/Makefile
    +++ b/drivers/char/Makefile
    @@ -111,6 +111,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
    obj-$(CONFIG_JS_RTC) += js-rtc.o
    js-rtc-y = rtc.o

    +obj-$(CONFIG_PCH_IEEE1588) += pch_ieee1588/
    +
    +obj-$(CONFIG_PCH_PHUB) += pch_phub/
    +
    # Files generated that shall be removed upon make clean
    clean-files := consolemap_deftbl.c defkeymap.c

    diff --git a/drivers/char/pch_phub/Makefile b/drivers/char/pch_phub/Makefile
    new file mode 100644
    index 0000000..bfe2a2b
    --- /dev/null
    +++ b/drivers/char/pch_phub/Makefile
    @@ -0,0 +1,11 @@
    +ifeq ($(CONFIG_PHUB_DEBUG),y)
    +EXTRA_CFLAGS += -DDEBUG
    +endif
    +
    +obj-$(CONFIG_PCH_PHUB) += pch_phub_drv.o
    +#to set CAN clock to 50Mhz
    +ifdef CONFIG_PCH_CAN_PCLK_50MHZ
    +EXTRA_CFLAGS +=-DPCH_CAN_PCLK_50MHZ
    +endif
    +
    +pch_phub_drv-objs := pch_phub.o
    diff --git a/drivers/char/pch_phub/pch_phub.c b/drivers/char/pch_phub/pch_phub.c
    new file mode 100755
    index 0000000..e9f5d4c
    --- /dev/null
    +++ b/drivers/char/pch_phub/pch_phub.c
    @@ -0,0 +1,1000 @@
    +/*!
    + * @file pch_phub.c
    + * @brief Provides all the implementation of the interfaces pertaining to
    + * the Packet Hub module.
    + * @version 1.0.0.0
    + * @section
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License as published by
    + * the Free Software Foundation; version 2 of the License.
    + *
    + * This program is distributed in the hope that it will be useful,
    + * but WITHOUT ANY WARRANTY; without even the implied warranty of
    + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    + * GNU General Public License for more details.
    + *
    + * You should have received a copy of the GNU General Public License
    + * along with this program; if not, write to the Free Software
    + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
    + */
    +
    +/*
    + * History:
    + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
    + *
    + * created:
    + * OKI SEMICONDUCTOR 04/14/2010
    + * modified:
    + *
    + */
    +
    +/* includes */
    +
    +#include <linux/module.h>
    +#include <linux/kernel.h>
    +#include <linux/types.h>
    +#include <linux/fs.h>
    +#include <linux/uaccess.h>
    +#include <linux/string.h>
    +#include <linux/pci.h>
    +#include <linux/io.h>
    +#include <linux/delay.h>
    +#include <linux/cdev.h>
    +#include <linux/device.h>
    +#include <linux/mutex.h>
    +
    +#include "pch_phub.h"
    +
    +/*--------------------------------------------
    + macros
    +--------------------------------------------*/
    +/* Status Register offset */
    +#define PHUB_STATUS 0x00
    +/* Control Register offset */
    +#define PHUB_CONTROL 0x04
    +/* Time out value for Status Register */
    +#define PHUB_TIMEOUT 0x05
    +/* Enabling for writing ROM */
    +#define PCH_PHUB_ROM_WRITE_ENABLE 0x01
    +/* Disabling for writing ROM */
    +#define PCH_PHUB_ROM_WRITE_DISABLE 0x00
    +/* ROM data area start address offset */
    +#define PCH_PHUB_ROM_START_ADDR 0x14
    +/* MAX number of INT_REDUCE_CONTROL registers */
    +#define MAX_NUM_INT_REDUCE_CONTROL_REG 128
    +
    +#define PCI_DEVICE_ID_PCH1_PHUB 0x8801
    +
    +#define PCH_MINOR_NOS 1
    +#define CLKCFG_CAN_50MHZ 0x12000000
    +#define CLKCFG_CANCLK_MASK 0xFF000000
    +
    +#define MODULE_NAME "pch_phub"
    +
    +#define PCH_READ_REG(a) ioread32(pch_phub_reg.pch_phub_base_address + (a))
    +
    +#define PCH_WRITE_REG(a, b) iowrite32((a), pch_phub_reg.pch_phub_base_address +\
    + (b))
    +/*--------------------------------------------
    + global variables
    +--------------------------------------------*/
    +/**
    + * struct pch_phub_reg_t - PHUB register structure
    + * @phub_id_reg: PHUB_ID register val
    + * @q_pri_val_reg: QUEUE_PRI_VAL register val
    + * @rc_q_maxsize_reg: RC_QUEUE_MAXSIZE register val
    + * @bri_q_maxsize_reg: BRI_QUEUE_MAXSIZE register val
    + * @comp_resp_timeout_reg: COMP_RESP_TIMEOUT register val
    + * @bus_slave_control_reg: BUS_SLAVE_CONTROL_REG register val
    + * @deadlock_avoid_type_reg: DEADLOCK_AVOID_TYPE register val
    + * @intpin_reg_wpermit_reg0: INTPIN_REG_WPERMIT register 0 val
    + * @intpin_reg_wpermit_reg1: INTPIN_REG_WPERMIT register 1 val
    + * @intpin_reg_wpermit_reg2: INTPIN_REG_WPERMIT register 2 val
    + * @intpin_reg_wpermit_reg3: INTPIN_REG_WPERMIT register 3 val
    + * @int_reduce_control_reg: INT_REDUCE_CONTROL registers val
    + * @clkcfg_reg: CLK CFG register val
    + * @pch_phub_opencount: check whether opened or not
    + * @pch_phub_base_address: register base address
    + * @pch_phub_extrom_base_address: external rom base address
    + * @pch_phub_suspended: PHUB status val
    + */
    +struct pch_phub_reg_t {
    + __u32 phub_id_reg;
    + __u32 q_pri_val_reg;
    + __u32 rc_q_maxsize_reg;
    + __u32 bri_q_maxsize_reg;
    + __u32 comp_resp_timeout_reg;
    + __u32 bus_slave_control_reg;
    + __u32 deadlock_avoid_type_reg;
    + __u32 intpin_reg_wpermit_reg0;
    + __u32 intpin_reg_wpermit_reg1;
    + __u32 intpin_reg_wpermit_reg2;
    + __u32 intpin_reg_wpermit_reg3;
    + __u32 int_reduce_control_reg[MAX_NUM_INT_REDUCE_CONTROL_REG];
    +#ifdef PCH_CAN_PCLK_50MHZ
    + __u32 clkcfg_reg;
    +#endif
    + __s32 pch_phub_opencount;
    + void __iomem *pch_phub_base_address;
    + void __iomem *pch_phub_extrom_base_address;
    + __s32 pch_phub_suspended;
    +} pch_phub_reg;
    +
    +DEFINE_MUTEX(pch_phub_ioctl_mutex);
    +
    +static DEFINE_SPINLOCK(pch_phub_lock); /* for spin lock */
    +
    +/* ToDo: major number allocation via module parameter */
    +static dev_t pch_phub_dev_no;
    +static __s32 pch_phub_major_no;
    +static struct cdev pch_phub_dev;
    +
    +
    +/*--------------------------------------------
    + internal function prototypes
    +--------------------------------------------*/
    +static __s32 __devinit pch_phub_probe(struct pci_dev *pdev, const
    + struct pci_device_id *id);
    +static void __devexit pch_phub_remove(struct pci_dev *pdev);
    +static __s32 pch_phub_suspend(struct pci_dev *pdev, pm_message_t state);
    +static __s32 pch_phub_resume(struct pci_dev *pdev);
    +static __s32 pch_phub_open(struct inode *inode, struct file *file);
    +static __s32 pch_phub_release(struct inode *inode, struct file *file);
    +static long pch_phub_ioctl(struct file *file, unsigned int cmd,
    + unsigned long arg);
    +static ssize_t pch_phub_read(struct file *, char __user *, size_t, loff_t *);
    +static ssize_t pch_phub_write(struct file *, const char __user *,
    + size_t, loff_t *);
    +
    +/**
    + * file_operations structure initialization
    + */
    +static const struct file_operations pch_phub_fops = {
    + .owner = THIS_MODULE,
    + .open = pch_phub_open,
    + .read = pch_phub_read,
    + .write = pch_phub_write,
    + .release = pch_phub_release,
    + .unlocked_ioctl = pch_phub_ioctl,
    +};
    +
    +/*--------------------------------------------
    + functions implementations
    +--------------------------------------------*/
    +/** pch_phub_read_modify_write_reg - Implements the functionality of reading,
    + * modifying and writing register.
    + * @reg_addr_offset: Contains the register offset address value
    + * @data: Contains the writing value
    + * @mask: Contains the mask value
    + */
    +static void pch_phub_read_modify_write_reg(__u32 reg_addr_offset,
    + __u32 data, __u32 mask)
    +{
    + void __iomem *reg_addr = pch_phub_reg.pch_phub_base_address +\
    + reg_addr_offset;
    + iowrite32(((ioread32(reg_addr) & ~mask)) | data, reg_addr);
    + return;
    +}
    +
    +
    +/** pch_phub_save_reg_conf - saves register configuration
    + */
    +static void pch_phub_save_reg_conf(struct pci_dev *pdev)
    +{
    + __u32 i = 0;
    +
    + dev_dbg(&pdev->dev, "pch_phub_save_reg_conf ENTRY\n");
    + /* to store contents of PHUB_ID register */
    + pch_phub_reg.phub_id_reg = PCH_READ_REG(PCH_PHUB_PHUB_ID_REG);
    + /* to store contents of QUEUE_PRI_VAL register */
    + pch_phub_reg.q_pri_val_reg = PCH_READ_REG(PCH_PHUB_QUEUE_PRI_VAL_REG);
    + /* to store contents of RC_QUEUE_MAXSIZE register */
    + pch_phub_reg.rc_q_maxsize_reg =
    + PCH_READ_REG(PCH_PHUB_RC_QUEUE_MAXSIZE_REG);
    + /* to store contents of BRI_QUEUE_MAXSIZE register */
    + pch_phub_reg.bri_q_maxsize_reg =
    + PCH_READ_REG(PCH_PHUB_BRI_QUEUE_MAXSIZE_REG);
    + /* to store contents of COMP_RESP_TIMEOUT register */
    + pch_phub_reg.comp_resp_timeout_reg =
    + PCH_READ_REG(PCH_PHUB_COMP_RESP_TIMEOUT_REG);
    + /* to store contents of BUS_SLAVE_CONTROL_REG register */
    + pch_phub_reg.bus_slave_control_reg =
    + PCH_READ_REG(PCH_PHUB_BUS_SLAVE_CONTROL_REG);
    + /* to store contents of DEADLOCK_AVOID_TYPE register */
    + pch_phub_reg.deadlock_avoid_type_reg =
    + PCH_READ_REG(PCH_PHUB_DEADLOCK_AVOID_TYPE_REG);
    + /* to store contents of INTPIN_REG_WPERMIT register 0 */
    + pch_phub_reg.intpin_reg_wpermit_reg0 =
    + PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG0);
    + /* to store contents of INTPIN_REG_WPERMIT register 1 */
    + pch_phub_reg.intpin_reg_wpermit_reg1 =
    + PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG1);
    + /* to store contents of INTPIN_REG_WPERMIT register 2 */
    + pch_phub_reg.intpin_reg_wpermit_reg2 =
    + PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG2);
    + /* to store contents of INTPIN_REG_WPERMIT register 3 */
    + pch_phub_reg.intpin_reg_wpermit_reg3 =
    + PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG3);
    + dev_dbg(&pdev->dev, "pch_phub_save_reg_conf : "
    + "pch_phub_reg.phub_id_reg=%x, "
    + "pch_phub_reg.q_pri_val_reg=%x, "
    + "pch_phub_reg.rc_q_maxsize_reg=%x, "
    + "pch_phub_reg.bri_q_maxsize_reg=%x, "
    + "pch_phub_reg.comp_resp_timeout_reg=%x, "
    + "pch_phub_reg.bus_slave_control_reg=%x, "
    + "pch_phub_reg.deadlock_avoid_type_reg=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg0=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg1=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg2=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg3=%x\n",
    + pch_phub_reg.phub_id_reg,
    + pch_phub_reg.q_pri_val_reg,
    + pch_phub_reg.rc_q_maxsize_reg,
    + pch_phub_reg.bri_q_maxsize_reg,
    + pch_phub_reg.comp_resp_timeout_reg,
    + pch_phub_reg.bus_slave_control_reg,
    + pch_phub_reg.deadlock_avoid_type_reg,
    + pch_phub_reg.intpin_reg_wpermit_reg0,
    + pch_phub_reg.intpin_reg_wpermit_reg1,
    + pch_phub_reg.intpin_reg_wpermit_reg2,
    + pch_phub_reg.intpin_reg_wpermit_reg3);
    + /* to store contents of INT_REDUCE_CONTROL registers */
    + for (i = 0; i < MAX_NUM_INT_REDUCE_CONTROL_REG; i++) {
    + pch_phub_reg.int_reduce_control_reg[i] =
    + PCH_READ_REG(
    + PCH_PHUB_INT_REDUCE_CONTROL_REG_BASE + 4 * i);
    + dev_dbg(&pdev->dev, "pch_phub_save_reg_conf : "
    + "pch_phub_reg.int_reduce_control_reg[%d]=%x\n",
    + i, pch_phub_reg.int_reduce_control_reg[i]);
    + }
    +#ifdef PCH_CAN_PCLK_50MHZ
    + /* save clk cfg register */
    + pch_phub_reg.clkcfg_reg = PCH_READ_REG(CLKCFG_REG_OFFSET);
    +#endif
    + return;
    +}
    +
    +/** pch_phub_restore_reg_conf - restore register configuration
    + */
    +
    +static void pch_phub_restore_reg_conf(struct pci_dev *pdev)
    +{
    + __u32 i;
    +
    + dev_dbg(&pdev->dev, "pch_phub_restore_reg_conf ENTRY\n");
    + /* to store contents of PHUB_ID register */
    + PCH_WRITE_REG(pch_phub_reg.phub_id_reg, PCH_PHUB_PHUB_ID_REG);
    + /* to store contents of QUEUE_PRI_VAL register */
    + PCH_WRITE_REG(pch_phub_reg.q_pri_val_reg, PCH_PHUB_QUEUE_PRI_VAL_REG);
    + /* to store contents of RC_QUEUE_MAXSIZE register */
    + PCH_WRITE_REG(pch_phub_reg.rc_q_maxsize_reg,
    + PCH_PHUB_RC_QUEUE_MAXSIZE_REG);
    + /* to store contents of BRI_QUEUE_MAXSIZE register */
    + PCH_WRITE_REG(pch_phub_reg.bri_q_maxsize_reg,
    + PCH_PHUB_BRI_QUEUE_MAXSIZE_REG);
    + /* to store contents of COMP_RESP_TIMEOUT register */
    + PCH_WRITE_REG(pch_phub_reg.comp_resp_timeout_reg,
    + PCH_PHUB_COMP_RESP_TIMEOUT_REG);
    + /* to store contents of BUS_SLAVE_CONTROL_REG register */
    + PCH_WRITE_REG(pch_phub_reg.bus_slave_control_reg,
    + PCH_PHUB_BUS_SLAVE_CONTROL_REG);
    + /* to store contents of DEADLOCK_AVOID_TYPE register */
    + PCH_WRITE_REG(pch_phub_reg.deadlock_avoid_type_reg,
    + PCH_PHUB_DEADLOCK_AVOID_TYPE_REG);
    + /* to store contents of INTPIN_REG_WPERMIT register 0 */
    + PCH_WRITE_REG(pch_phub_reg.intpin_reg_wpermit_reg0,
    + PCH_PHUB_INTPIN_REG_WPERMIT_REG0);
    + /* to store contents of INTPIN_REG_WPERMIT register 1 */
    + PCH_WRITE_REG(pch_phub_reg.intpin_reg_wpermit_reg1,
    + PCH_PHUB_INTPIN_REG_WPERMIT_REG1);
    + /* to store contents of INTPIN_REG_WPERMIT register 2 */
    + PCH_WRITE_REG(pch_phub_reg.intpin_reg_wpermit_reg2,
    + PCH_PHUB_INTPIN_REG_WPERMIT_REG2);
    + /* to store contents of INTPIN_REG_WPERMIT register 3 */
    + PCH_WRITE_REG(pch_phub_reg.intpin_reg_wpermit_reg3,
    + PCH_PHUB_INTPIN_REG_WPERMIT_REG3);
    + dev_dbg(&pdev->dev, "pch_phub_save_reg_conf : "
    + "pch_phub_reg.phub_id_reg=%x, "
    + "pch_phub_reg.q_pri_val_reg=%x, "
    + "pch_phub_reg.rc_q_maxsize_reg=%x, "
    + "pch_phub_reg.bri_q_maxsize_reg=%x, "
    + "pch_phub_reg.comp_resp_timeout_reg=%x, "
    + "pch_phub_reg.bus_slave_control_reg=%x, "
    + "pch_phub_reg.deadlock_avoid_type_reg=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg0=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg1=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg2=%x, "
    + "pch_phub_reg.intpin_reg_wpermit_reg3=%x\n",
    + pch_phub_reg.phub_id_reg,
    + pch_phub_reg.q_pri_val_reg,
    + pch_phub_reg.rc_q_maxsize_reg,
    + pch_phub_reg.bri_q_maxsize_reg,
    + pch_phub_reg.comp_resp_timeout_reg,
    + pch_phub_reg.bus_slave_control_reg,
    + pch_phub_reg.deadlock_avoid_type_reg,
    + pch_phub_reg.intpin_reg_wpermit_reg0,
    + pch_phub_reg.intpin_reg_wpermit_reg1,
    + pch_phub_reg.intpin_reg_wpermit_reg2,
    + pch_phub_reg.intpin_reg_wpermit_reg3);
    + /* to store contents of INT_REDUCE_CONTROL register */
    + for (i = 0; i < MAX_NUM_INT_REDUCE_CONTROL_REG; i++) {
    + PCH_WRITE_REG(pch_phub_reg.int_reduce_control_reg[i],
    + PCH_PHUB_INT_REDUCE_CONTROL_REG_BASE + 4 * i);
    + dev_dbg(&pdev->dev, "pch_phub_save_reg_conf : "
    + "pch_phub_reg.int_reduce_control_reg[%d]=%x\n",
    + i, pch_phub_reg.int_reduce_control_reg[i]);
    + }
    +
    +#ifdef PCH_CAN_PCLK_50MHZ
    + /*restore the clock config reg */
    + PCH_WRITE_REG(pch_phub_reg.clkcfg_reg, CLKCFG_REG_OFFSET);
    +#endif
    +
    + return;
    +}
    +
    +/** pch_phub_read_serial_rom - Implements the functionality of reading Serial
    + * ROM.
    + * @offset_address: Contains the Serial ROM address offset value
    + * @data: Contains the Serial ROM value
    + */
    +static __s32 pch_phub_read_serial_rom(__u32 offset_address, __u8 *data)
    +{
    + void __iomem *mem_addr = pch_phub_reg.pch_phub_extrom_base_address +\
    + offset_address;
    +
    + *data = ioread8(mem_addr);
    +
    + return 0;
    +}
    +
    +/** pch_phub_write_serial_rom - Implements the functionality of writing Serial
    + * ROM.
    + * @offset_address: Contains the Serial ROM address offset value
    + * @data: Contains the Serial ROM value
    + */
    +static __s32 pch_phub_write_serial_rom(__u32 offset_address,
    + __u8 data)
    +{
    + __s32 retval = 0;
    + void __iomem *mem_addr = pch_phub_reg.pch_phub_extrom_base_address +\
    + (offset_address & 0xFFFFFFFC);
    + __s32 i = 0;
    + __u32 word_data = 0;
    +
    + iowrite32(PCH_PHUB_ROM_WRITE_ENABLE,
    + pch_phub_reg.pch_phub_extrom_base_address +\
    + PHUB_CONTROL);
    +
    + word_data = ioread32(mem_addr);
    +
    + switch (offset_address % 4) {
    + case 0:
    + word_data &= 0xFFFFFF00;
    + iowrite32((word_data | (__u32)data),
    + mem_addr);
    + break;
    + case 1:
    + word_data &= 0xFFFF00FF;
    + iowrite32((word_data | ((__u32)data << 8)),
    + mem_addr);
    + break;
    + case 2:
    + word_data &= 0xFF00FFFF;
    + iowrite32((word_data | ((__u32)data << 16)),
    + mem_addr);
    + break;
    + case 3:
    + word_data &= 0x00FFFFFF;
    + iowrite32((word_data | ((__u32)data << 24)),
    + mem_addr);
    + break;
    + }
    + while (0x00 !=
    + ioread8(pch_phub_reg.pch_phub_extrom_base_address +\
    + PHUB_STATUS)) {
    + msleep(1);
    + if (PHUB_TIMEOUT == i) {
    + retval = -EPERM;
    + break;
    + }
    + i++;
    + }
    +
    + iowrite32(PCH_PHUB_ROM_WRITE_DISABLE,
    + pch_phub_reg.pch_phub_extrom_base_address +\
    + PHUB_CONTROL);
    +
    + return retval;
    +}
    +
    +/** pch_phub_read_serial_rom_val - Implements the functionality of reading
    + * Serial ROM value.
    + * @offset_address: Contains the Serial ROM address offset value
    + * @data: Contains the Serial ROM value
    + */
    +static __s32 pch_phub_read_serial_rom_val(__u32 offset_address, __u8 *data)
    +{
    + __s32 retval = 0;
    + __u32 mem_addr;
    +
    + mem_addr = (offset_address / 4 * 8) + 3 -
    + (offset_address % 4) + PCH_PHUB_ROM_START_ADDR;
    + retval = pch_phub_read_serial_rom(mem_addr, data);
    +
    + return retval;
    +}
    +
    +/** pch_phub_write_serial_rom_val - Implements the functionality of writing
    + * Serial ROM value.
    + * @offset_address: Contains the Serial ROM address offset value
    + * @data: Contains the Serial ROM value
    + */
    +static __s32 pch_phub_write_serial_rom_val(__u32 offset_address,
    + __u8 data)
    +{
    + __s32 retval = 0;
    + __u32 mem_addr;
    +
    + mem_addr =
    + (offset_address / 4 * 8) + 3 - (offset_address % 4) +
    + PCH_PHUB_ROM_START_ADDR;
    + retval = pch_phub_write_serial_rom(mem_addr, data);
    +
    + return retval;
    +}
    +
    +/** pch_phub_gbe_serial_rom_conf - makes Serial ROM header format configuration
    + * for Gigabit Ethernet MAC address
    + */
    +static __s32 pch_phub_gbe_serial_rom_conf(void)
    +{
    + __s32 retval = 0;
    +
    + retval |= pch_phub_write_serial_rom(0x0b, 0xbc);
    + retval |= pch_phub_write_serial_rom(0x0a, 0x10);
    + retval |= pch_phub_write_serial_rom(0x09, 0x01);
    + retval |= pch_phub_write_serial_rom(0x08, 0x02);
    +
    + retval |= pch_phub_write_serial_rom(0x0f, 0x00);
    + retval |= pch_phub_write_serial_rom(0x0e, 0x00);
    + retval |= pch_phub_write_serial_rom(0x0d, 0x00);
    + retval |= pch_phub_write_serial_rom(0x0c, 0x80);
    +
    + retval |= pch_phub_write_serial_rom(0x13, 0xbc);
    + retval |= pch_phub_write_serial_rom(0x12, 0x10);
    + retval |= pch_phub_write_serial_rom(0x11, 0x01);
    + retval |= pch_phub_write_serial_rom(0x10, 0x18);
    +
    + retval |= pch_phub_write_serial_rom(0x1b, 0xbc);
    + retval |= pch_phub_write_serial_rom(0x1a, 0x10);
    + retval |= pch_phub_write_serial_rom(0x19, 0x01);
    + retval |= pch_phub_write_serial_rom(0x18, 0x19);
    +
    + retval |= pch_phub_write_serial_rom(0x23, 0xbc);
    + retval |= pch_phub_write_serial_rom(0x22, 0x10);
    + retval |= pch_phub_write_serial_rom(0x21, 0x01);
    + retval |= pch_phub_write_serial_rom(0x20, 0x3a);
    +
    + retval |= pch_phub_write_serial_rom(0x27, 0x01);
    + retval |= pch_phub_write_serial_rom(0x26, 0x00);
    + retval |= pch_phub_write_serial_rom(0x25, 0x00);
    + retval |= pch_phub_write_serial_rom(0x24, 0x00);
    +
    + return retval;
    +}
    +
    +/** pch_phub_read_gbe_mac_addr - Contains the Gigabit Ethernet MAC address
    + * offset value
    + * @offset_address: Gigabit Ethernet MAC address offset value
    + * @data: Contains the Gigabit Ethernet MAC address value
    + */
    +static __s32 pch_phub_read_gbe_mac_addr(__u32 offset_address, __u8 *data)
    +{
    + __s32 retval = 0;
    +
    + retval = pch_phub_read_serial_rom_val(offset_address, data);
    +
    + return retval;
    +}
    +
    +/** pch_phub_write_gbe_mac_addr - Write MAC address
    + * @offset_address: Contains the Gigabit Ethernet MAC address offset value
    + * @data: Contains the Gigabit Ethernet MAC address value
    + */
    +static __s32 pch_phub_write_gbe_mac_addr(__u32 offset_address,
    + __u8 data)
    +{
    + __s32 retval = 0;
    +
    + retval = pch_phub_gbe_serial_rom_conf();
    + retval |= pch_phub_write_serial_rom_val(offset_address, data);
    +
    + return retval;
    +}
    +
    +/** pch_phub_open - Implements the Initializing and opening of the Packet Hub
    + module.
    + * @inode: Contains the reference of the inode structure
    + * @file: Contains the reference of the file structure
    + */
    +static __s32 pch_phub_open(struct inode *inode, struct file *file)
    +{
    + __s32 ret;
    +
    + spin_lock(&pch_phub_lock);
    + if (pch_phub_reg.pch_phub_opencount) {
    + ret = -EBUSY;
    + } else {
    + pch_phub_reg.pch_phub_opencount++;
    + ret = 0;
    + }
    + spin_unlock(&pch_phub_lock);
    +
    + return ret;
    +}
    +/** pch_phub_read - Implements the read functionality of the Packet Hub module.
    + * @file: Contains the reference of the file structure
    + * @buf: Usermode buffer pointer
    + * @size: Usermode buffer size
    + * @pos: Contains the reference of the file structure
    + */
    +
    +static ssize_t pch_phub_read(struct file *file, char __user *buf, size_t size,
    + loff_t *pos)
    +{
    + __u32 rom_signature = 0;
    + __u8 rom_length;
    + __s32 ret_value;
    + __u32 tmp;
    + __u8 data;
    + __u32 addr_offset = 0;
    +
    + /*Get Rom signature*/
    + pch_phub_read_serial_rom(0x80, (__u8 *)&rom_signature);
    + pch_phub_read_serial_rom(0x81, (__u8 *)&tmp);
    + rom_signature |= (tmp & 0xff) << 8;
    + if (rom_signature == 0xAA55) {
    + pch_phub_read_serial_rom(0x82, &rom_length);
    + if (size > (rom_length * 512)+1)
    + return -ENOMEM;
    +
    + for (addr_offset = 0;
    + addr_offset <= ((__u32)rom_length * 512);
    + addr_offset++) {
    + pch_phub_read_serial_rom(0x80 + addr_offset, &data);
    + ret_value = copy_to_user((void *)&buf[addr_offset],
    + (void *)&data, 1);
    + if (ret_value)
    + return -EFAULT;
    + }
    + } else {
    + return -ENOEXEC;
    + }
    +
    + return rom_length * 512 + 1;
    +}
    +
    +/** pch_phub_write - Implements the write functionality of the Packet Hub
    + * module.
    + * @file: Contains the reference of the file structure
    + * @buf: Usermode buffer pointer
    + * @size: Usermode buffer size
    + * @pos: Contains the reference of the file structure
    + */
    +static ssize_t pch_phub_write(struct file *file, const char __user *buf,
    + size_t size, loff_t *pos)
    +{
    + static __u8 data[PCH_PHUB_OROM_SIZE];
    + __s32 ret_value;
    + __u32 addr_offset = 0;
    +
    + if (size > PCH_PHUB_OROM_SIZE)
    + size = PCH_PHUB_OROM_SIZE;
    +
    + ret_value = copy_from_user(data, buf, size);
    + if (ret_value)
    + return -EFAULT;
    +
    + for (addr_offset = 0; addr_offset < size; addr_offset++) {
    + ret_value = pch_phub_write_serial_rom(0x80 + addr_offset,
    + data[addr_offset]);
    + }
    +
    + return size;
    +}
    +
    +
    +/** pch_phub_release - Implements the release functionality of the Packet Hub
    + * module.
    + * @inode: Contains the reference of the inode structure
    + * @file: Contains the reference of the file structure
    + */
    +static __s32 pch_phub_release(struct inode *inode, struct file *file)
    +{
    + spin_lock(&pch_phub_lock);
    +
    + if (pch_phub_reg.pch_phub_opencount > 0)
    + pch_phub_reg.pch_phub_opencount--;
    + spin_unlock(&pch_phub_lock);
    +
    + return 0;
    +}
    +
    +/** pch_phub_ioctl - Implements the various ioctl functionalities of the Packet
    + * Hub module.
    + * @inode: Contains the reference of the inode structure
    + * @file: Contains the reference of the file structure
    + * @cmd: Contains the command value
    + * @arg: Contains the command argument value
    + */
    +
    +
    +static long pch_phub_ioctl(struct file *file, unsigned int cmd,
    + unsigned long arg)
    +{
    + __s32 ret_value = 0;
    + struct pch_phub_reqt __user *p_pch_phub_reqt;
    + __u32 data;
    + __u32 mac_addr[2];
    + __s32 ret;
    + __u32 i;
    + void __user *varg = (void __user *)arg;
    +
    + ret = mutex_trylock(&pch_phub_ioctl_mutex);
    + if (ret == 0)
    + goto return_ioctrl;/*Can't get mutex lock*/
    +
    + if (pch_phub_reg.pch_phub_suspended == true) {
    + ret_value = -EPERM;
    + goto return_ioctrl;
    + }
    +
    + p_pch_phub_reqt = (struct pch_phub_reqt *)varg;
    +
    + if (ret_value)
    + goto return_ioctrl;
    +
    + /* End of Access area check */
    +
    +
    + switch (cmd) {
    +
    + case IOCTL_PHUB_READ_MAC_ADDR:
    + mac_addr[0] = 0;
    + mac_addr[1] = 0;
    + for (i = 0; i < 4; i++) {
    + pch_phub_read_gbe_mac_addr(i, (__u8 *)&data);
    + mac_addr[0] |= data << i*8;
    + }
    + for (; i < 6; i++) {
    + pch_phub_read_gbe_mac_addr(i, (__u8 *)&data);
    + mac_addr[1] |= data << (i-4)*8;
    + }
    +
    + ret_value = copy_to_user((void *)&p_pch_phub_reqt->data,
    + (void *)mac_addr, sizeof(mac_addr));
    + if (ret_value) {
    + ret_value = -EFAULT;
    + break;
    + }
    + break;
    + case IOCTL_PHUB_WRITE_MAC_ADDR:
    + ret_value = get_user(mac_addr[0], &p_pch_phub_reqt->data[0]);
    + ret_value += get_user(mac_addr[1], &p_pch_phub_reqt->data[1]);
    + if (ret_value) {
    + ret_value = -EFAULT;
    + break;
    + }
    + for (i = 0; i < 4; i++) {
    + data = (mac_addr[0] & (0xff << 8*i))>>(8*i);
    + pch_phub_write_gbe_mac_addr(i, data);
    + }
    + for (; i < 6; i++) {
    + data = (mac_addr[1] & (0xff << 8*(i-4)))>>(8*(i-4));
    + pch_phub_write_gbe_mac_addr(i, data);
    + }
    + break;
    + default:
    + ret_value = -EINVAL;
    + break;
    + }
    +return_ioctrl:
    + mutex_unlock(&pch_phub_ioctl_mutex);
    + return ret_value;
    +}
    +
    +
    +/** pch_phub_probe - Implements the probe functionality of the module.
    + * @pdev: Contains the reference of the pci_dev structure
    + * @id: Contains the reference of the pci_device_id structure
    + */
    +static __s32 __devinit pch_phub_probe(struct pci_dev *pdev,
    + const struct pci_device_id *id)
    +{
    +
    + char *DRIVER_NAME = "pch_phub";
    + __s32 ret;
    + __u32 rom_size;
    +
    + pch_phub_major_no = (pch_phub_major_no < 0 || pch_phub_major_no > 254) ?
    + 0 : pch_phub_major_no;
    +
    + ret = pci_enable_device(pdev);
    + if (ret) {
    + dev_dbg(&pdev->dev,
    + "\npch_phub_probe : pci_enable_device FAILED");
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "pci_enable_device returns %d\n", ret);
    +
    + ret = pci_request_regions(pdev, DRIVER_NAME);
    + if (ret) {
    + dev_dbg(&pdev->dev,
    + "pch_phub_probe : pci_request_regions FAILED");
    + pci_disable_device(pdev);
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "pci_request_regions returns %d\n", ret);
    +
    + pch_phub_reg.pch_phub_base_address = \
    + (void __iomem *)pci_iomap(pdev, 1, 0);
    +
    + if (pch_phub_reg.pch_phub_base_address == 0) {
    + dev_dbg(&pdev->dev, "pch_phub_probe : pci_iomap FAILED");
    + pci_release_regions(pdev);
    + pci_disable_device(pdev);
    + ret = -ENOMEM;
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : pci_iomap SUCCESS and value "
    + "in pch_phub_base_address variable is 0x%08x\n",
    + (__u32)pch_phub_reg.pch_phub_base_address);
    +
    + pch_phub_reg.pch_phub_extrom_base_address =
    + (void __iomem *)pci_map_rom(pdev, &rom_size);
    + if (pch_phub_reg.pch_phub_extrom_base_address == 0) {
    + dev_dbg(&pdev->dev, "pch_phub_probe : pci_map_rom FAILED");
    + pci_iounmap(pdev, (void *)pch_phub_reg.pch_phub_base_address);
    + pci_release_regions(pdev);
    + pci_disable_device(pdev);
    + ret = -ENOMEM;
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "pci_map_rom SUCCESS and value in "
    + "pch_phub_extrom_base_address variable is 0x%08x\n",
    + (__u32)pch_phub_reg.pch_phub_extrom_base_address);
    +
    + if (pch_phub_major_no) {
    + pch_phub_dev_no = MKDEV(pch_phub_major_no, 0);
    + ret = register_chrdev_region(pch_phub_dev_no,
    + PCH_MINOR_NOS, DRIVER_NAME);
    + if (ret) {
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "register_chrdev_region FAILED");
    + pci_unmap_rom(pdev,
    + (void *)pch_phub_reg.pch_phub_extrom_base_address);
    + pci_iounmap(pdev,
    + (void *)pch_phub_reg.pch_phub_base_address);
    + pci_release_regions(pdev);
    + pci_disable_device(pdev);
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "register_chrdev_region returns %d\n", ret);
    + } else {
    + ret = alloc_chrdev_region(&pch_phub_dev_no, 0,
    + PCH_MINOR_NOS, DRIVER_NAME);
    + if (ret) {
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "alloc_chrdev_region FAILED");
    + pci_unmap_rom(pdev,
    + (void *)pch_phub_reg.pch_phub_extrom_base_address);
    + pci_iounmap(pdev,
    + (void *)pch_phub_reg.pch_phub_base_address);
    + pci_release_regions(pdev);
    + pci_disable_device(pdev);
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : "
    + "alloc_chrdev_region returns %d\n", ret);
    + }
    +
    + cdev_init(&pch_phub_dev, &pch_phub_fops);
    + dev_dbg(&pdev->dev,
    + "pch_phub_probe : cdev_init invoked successfully\n");
    +
    + pch_phub_dev.owner = THIS_MODULE;
    + pch_phub_dev.ops = &pch_phub_fops;
    +
    + ret = cdev_add(&pch_phub_dev, pch_phub_dev_no, PCH_MINOR_NOS);
    + if (ret) {
    + dev_dbg(&pdev->dev, "pch_phub_probe : cdev_add FAILED");
    + unregister_chrdev_region(pch_phub_dev_no, PCH_MINOR_NOS);
    + pci_unmap_rom(pdev,
    + (void *)pch_phub_reg.pch_phub_extrom_base_address);
    + pci_iounmap(pdev, (void *)pch_phub_reg.pch_phub_base_address);
    + pci_release_regions(pdev);
    + pci_disable_device(pdev);
    + goto err_probe;
    + }
    + dev_dbg(&pdev->dev, "pch_phub_probe : cdev_add returns %d\n", ret);
    +
    +#ifdef PCH_CAN_PCLK_50MHZ
    + /*set the clock config reg if CAN clock is 50Mhz */
    + dev_dbg(&pdev->dev, "pch_phub_probe : invoking "
    + "pch_phub_read_modify_write_reg "
    + "to set CLKCFG reg for CAN clk 50Mhz\n");
    + pch_phub_read_modify_write_reg((__u32)CLKCFG_REG_OFFSET,
    + CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK);
    +#endif
    + /* set the prefech value */
    + PCH_WRITE_REG(0x000ffffa, 0x14);
    + /* set the interrupt delay value */
    + PCH_WRITE_REG(0x25, 0x44);
    + return 0;
    +
    +err_probe:
    + dev_dbg(&pdev->dev, "pch_phub_probe returns %d\n", ret);
    + return ret;
    +}
    +
    +/** pch_phub_remove - Implements the remove functionality of the module.
    + * @pdev: Contains the reference of the pci_dev structure
    + */
    +static void __devexit pch_phub_remove(struct pci_dev *pdev)
    +{
    +
    + cdev_del(&pch_phub_dev);
    + dev_dbg(&pdev->dev,
    + "pch_phub_remove - cdev_del Invoked successfully\n");
    +
    + unregister_chrdev_region(pch_phub_dev_no, PCH_MINOR_NOS);
    + dev_dbg(&pdev->dev, "pch_phub_remove - "
    + "unregister_chrdev_region Invoked successfully\n");
    +
    + pci_unmap_rom(pdev, (void *)pch_phub_reg.pch_phub_extrom_base_address);
    +
    + pci_iounmap(pdev, (void *)pch_phub_reg.pch_phub_base_address);
    +
    + dev_dbg(&pdev->dev, "pch_phub_remove - "
    + "pci_iounmap Invoked successfully\n");
    +
    + pci_release_regions(pdev);
    + dev_dbg(&pdev->dev, "pch_phub_remove - "
    + "pci_release_regions Invoked successfully\n");
    +
    + pci_disable_device(pdev);
    + dev_dbg(&pdev->dev, "pch_phub_remove - "
    + "pci_disable_device Invoked successfully\n");
    +
    +}
    +
    +#ifdef CONFIG_PM
    +
    +/** pch_phub_suspend - Implements the suspend functionality of the module.
    + * @pdev: Contains the reference of the pci_dev structure
    + * @state: Contains the reference of the pm_message_t structure
    + */
    +static __s32 pch_phub_suspend(struct pci_dev *pdev, pm_message_t state)
    +{
    + __s32 ret;
    +
    + pch_phub_reg.pch_phub_suspended = true;/* For blocking further IOCTLs */
    +
    + pch_phub_save_reg_conf(pdev);
    + dev_dbg(&pdev->dev, "pch_phub_suspend - "
    + "pch_phub_save_reg_conf Invoked successfully\n");
    +
    + ret = pci_save_state(pdev);
    + if (ret) {
    + dev_dbg(&pdev->dev,
    + " pch_phub_suspend -pci_save_state returns-%d\n", ret);
    + return ret;
    + }
    + dev_dbg(&pdev->dev,
    + "pch_phub_suspend - pci_save_state returns %d\n", ret);
    + pci_enable_wake(pdev, PCI_D3hot, 0);
    + dev_dbg(&pdev->dev, "pch_phub_suspend - "
    + "pci_enable_wake Invoked successfully\n");
    +
    + pci_disable_device(pdev);
    + dev_dbg(&pdev->dev, "pch_phub_suspend - "
    + "pci_disable_device Invoked successfully\n");
    +
    + pci_set_power_state(pdev, pci_choose_state(pdev, state));
    + dev_dbg(&pdev->dev, "pch_phub_suspend - "
    + "pci_set_power_state Invoked successfully "
    + "return = %d\n", 0);
    +
    + return 0;
    +}
    +
    +/** pch_phub_resume - Implements the resume functionality of the module.
    + * @pdev: Contains the reference of the pci_dev structure
    + */
    +static __s32 pch_phub_resume(struct pci_dev *pdev)
    +{
    +
    + __s32 ret;
    +
    + pci_set_power_state(pdev, PCI_D0);
    + dev_dbg(&pdev->dev, "pch_phub_resume - "
    + "pci_set_power_state Invoked successfully\n");
    +
    + pci_restore_state(pdev);
    + dev_dbg(&pdev->dev, "pch_phub_resume - "
    + "pci_restore_state Invoked successfully\n");
    +
    + ret = pci_enable_device(pdev);
    + if (ret) {
    + dev_dbg(&pdev->dev,
    + "pch_phub_resume-pci_enable_device failed ");
    + return ret;
    + }
    +
    + dev_dbg(&pdev->dev, "pch_phub_resume - "
    + "pci_enable_device returns -%d\n", ret);
    +
    + pci_enable_wake(pdev, PCI_D3hot, 0);
    + dev_dbg(&pdev->dev, "pch_phub_resume - "
    + "pci_enable_wake Invoked successfully\n");
    +
    + pch_phub_restore_reg_conf(pdev);
    + dev_dbg(&pdev->dev, "pch_phub_resume - "
    + "pch_phub_restore_reg_conf Invoked successfully\n");
    +
    + pch_phub_reg.pch_phub_suspended = false;
    +
    + dev_dbg(&pdev->dev, "pch_phub_resume returns- %d\n", 0);
    + return 0;
    +}
    +#endif /* CONFIG_PM */
    +
    +static struct pci_device_id pch_phub_pcidev_id[] = {
    +
    + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)},
    + {0,}
    +};
    +
    +
    +static struct pci_driver pch_phub_driver = {
    + .name = "pch_phub",
    + .id_table = pch_phub_pcidev_id,
    + .probe = pch_phub_probe,
    + .remove = __devexit_p(pch_phub_remove),
    +#ifdef CONFIG_PM
    + .suspend = pch_phub_suspend,
    + .resume = pch_phub_resume
    +#endif
    +};
    +
    +/** pch_phub_pci_init - Implements the initialization functionality of
    + * the module.
    + */
    +static __s32 __init pch_phub_pci_init(void)
    +{
    + __s32 ret;
    + ret = pci_register_driver(&pch_phub_driver);
    +
    + return ret;
    +}
    +
    +/** pch_phub_pci_exit - Implements the exit functionality of the module.
    + */
    +static void __exit pch_phub_pci_exit(void)
    +{
    + pci_unregister_driver(&pch_phub_driver);
    +
    +}
    +
    +module_init(pch_phub_pci_init);
    +module_exit(pch_phub_pci_exit);
    +module_param(pch_phub_major_no, int, S_IRUSR | S_IWUSR);
    +
    +MODULE_DESCRIPTION("PCH PACKET HUB PCI Driver");
    +MODULE_LICENSE("GPL");
    +
    diff --git a/drivers/char/pch_phub/pch_phub.h b/drivers/char/pch_phub/pch_phub.h
    new file mode 100755
    index 0000000..4859e2f
    --- /dev/null
    +++ b/drivers/char/pch_phub/pch_phub.h
    @@ -0,0 +1,87 @@
    +#ifndef __PCH_PHUB_H__
    +#define __PCH_PHUB_H__
    +/*!
    + * @file pch_phub.h
    + * @brief Provides all the interfaces pertaining to the Packet Hub module.
    + * @version 1.0.0.0
    + * @section
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License as published by
    + * the Free Software Foundation; version 2 of the License.
    + *
    + * This program is distributed in the hope that it will be useful,
    + * but WITHOUT ANY WARRANTY; without even the implied warranty of
    + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    + * GNU General Public License for more details.
    + *
    + * You should have received a copy of the GNU General Public License
    + * along with this program; if not, write to the Free Software
    + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
    + */
    +
    +/*
    + * History:
    + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
    + *
    + * created:
    + * OKI SEMICONDUCTOR 04/14/2010
    + * modified:
    + *
    + */
    +
    +#define PHUB_IOCTL_MAGIC (0xf7)
    +
    +/*Outlines the read register function signature. */
    +#define IOCTL_PHUB_READ_REG (_IOW(PHUB_IOCTL_MAGIC, 1, __u32))
    +
    +/*Outlines the write register function signature. */
    +#define IOCTL_PHUB_WRITE_REG (_IOW(PHUB_IOCTL_MAGIC, 2, __u32))
    +
    +/*Outlines the read, modify and write register function signature. */
    +#define IOCTL_PHUB_READ_MODIFY_WRITE_REG (_IOW(PHUB_IOCTL_MAGIC, 3,\
    + __u32))
    +
    +/*Outlines the read option rom function signature. */
    +#define IOCTL_PHUB_READ_OROM (_IOW(PHUB_IOCTL_MAGIC, 4, __u32))
    +
    +/*Outlines the write option rom function signature. */
    +#define IOCTL_PHUB_WRITE_OROM (_IOW(PHUB_IOCTL_MAGIC, 5, __u32))
    +
    +/*Outlines the read mac address function signature. */
    +#define IOCTL_PHUB_READ_MAC_ADDR (_IOW(PHUB_IOCTL_MAGIC, 6, __u32))
    +
    +/*brief Outlines the write mac address function signature. */
    +#define IOCTL_PHUB_WRITE_MAC_ADDR (_IOW(PHUB_IOCTL_MAGIC, 7, __u32))
    +
    +
    +/* Registers address offset */
    +#define PCH_PHUB_PHUB_ID_REG 0x0000
    +#define PCH_PHUB_QUEUE_PRI_VAL_REG 0x0004
    +#define PCH_PHUB_RC_QUEUE_MAXSIZE_REG 0x0008
    +#define PCH_PHUB_BRI_QUEUE_MAXSIZE_REG 0x000C
    +#define PCH_PHUB_COMP_RESP_TIMEOUT_REG 0x0010
    +#define PCH_PHUB_BUS_SLAVE_CONTROL_REG 0x0014
    +#define PCH_PHUB_DEADLOCK_AVOID_TYPE_REG 0x0018
    +#define PCH_PHUB_INTPIN_REG_WPERMIT_REG0 0x0020
    +#define PCH_PHUB_INTPIN_REG_WPERMIT_REG1 0x0024
    +#define PCH_PHUB_INTPIN_REG_WPERMIT_REG2 0x0028
    +#define PCH_PHUB_INTPIN_REG_WPERMIT_REG3 0x002C
    +#define PCH_PHUB_INT_REDUCE_CONTROL_REG_BASE 0x0040
    +#define CLKCFG_REG_OFFSET 0x500
    +
    +#define PCH_PHUB_OROM_SIZE 15361
    +/**
    + * struct pch_phub_reqt - It is a structure used for perserving information
    + * related to the Packet Hub request.
    + * @addr_offset: specifies the register address offset
    + * @data: specifies the data
    + * @mask: specifies the mask
    + *
    + */
    +struct pch_phub_reqt {
    + __u32 dev_id;
    + __u32 func_id;
    + __u32 data[2];
    +};
    +
    +#endif
    --
    1.6.0.6


    \
     
     \ /
      Last update: 2010-06-14 14:11    [W:0.088 / U:92.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site