Messages in this thread | | | Date | Thu, 10 Jun 2010 19:08:43 -0700 (PDT) | Subject | Re: Question on siig sata 3 controller | From | "Alan" <> |
| |
> On 06/10/2010 12:39 AM, Alan wrote: >> Does anyone know the status of the SIIG DP SATA 6Gb/s 2S1P PCIe (Part >> number: SC-SA0E12-S1)? >> >> I am encountering problems writing a large quantity through this >> controller and I want to see if there is a way to fix this. The pci ids >> do not appear to be referenced in the kernel. >> >> Are any of the siig sata controllers supported? Is there some issue with >> them supporting Linux that I am not aware of? >> >> Here is the lspci data: >> >> 05:00.0 SATA controller: Device 1b4b:9123 (rev 11) (prog-if 01 [AHCI >> 1.0]) >> Subsystem: Device 1b4b:9123 >> Flags: bus master, fast devsel, latency 0, IRQ 30 >> I/O ports at dc00 [size=8] >> I/O ports at d880 [size=4] >> I/O ports at d800 [size=8] >> I/O ports at d480 [size=4] >> I/O ports at d400 [size=16] >> Memory at f9fff800 (32-bit, non-prefetchable) [size=2K] >> Expansion ROM at f9fe0000 [disabled] [size=64K] >> Capabilities:<access denied> >> Kernel driver in use: ahci > > What issues are you seeing? > > The 'ahci' driver is aware of this controller...
When writing large amounts of data I see messages like the following:
Jun 8 19:31:46 zowie kernel: ata2.00: exception Emask 0x0 SAct 0x3fffffff SErr 0x0 action 0x6 frozen Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/28:00:17:fb:06/00:00:04:00:00/40 tag 0 ncq 20480 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/20:08:9f:db:06/00:00:04:00:00/40 tag 1 ncq 16384 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/28:10:d7:df:06/00:00:04:00:00/40 tag 2 ncq 20480 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/30:18:0f:e4:06/00:00:04:00:00/40 tag 3 ncq 24576 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/28:20:17:fc:06/00:00:04:00:00/40 tag 4 ncq 20480 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/08:28:b7:b7:06/00:00:04:00:00/40 tag 5 ncq 4096 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED Jun 8 19:31:46 zowie kernel: ata2.00: cmd 61/20:30:1f:d3:06/00:00:04:00:00/40 tag 6 ncq 16384 out Jun 8 19:31:46 zowie kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 8 19:31:46 zowie kernel: ata2.00: status: { DRDY } Jun 8 19:31:46 zowie kernel: ata2.00: failed command: WRITE FPDMA QUEUED
After a bit it does this:
Jun 8 19:31:46 zowie kernel: ata2: hard resetting link Jun 8 19:31:48 zowie kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 8 19:31:53 zowie kernel: ata2.00: qc timeout (cmd 0xec) Jun 8 19:31:53 zowie kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jun 8 19:31:53 zowie kernel: ata2.00: revalidation failed (errno=-5) Jun 8 19:31:53 zowie kernel: ata2: hard resetting link Jun 8 19:31:54 zowie kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 8 19:32:04 zowie kernel: ata2.00: qc timeout (cmd 0xec) Jun 8 19:32:05 zowie kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jun 8 19:32:05 zowie kernel: ata2.00: revalidation failed (errno=-5) Jun 8 19:32:05 zowie kernel: ata2: limiting SATA link speed to 1.5 Gbps Jun 8 19:32:05 zowie kernel: ata2: hard resetting link Jun 8 19:32:05 zowie kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jun 8 19:32:35 zowie kernel: ata2.00: qc timeout (cmd 0xec) Jun 8 19:32:36 zowie kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jun 8 19:32:36 zowie kernel: ata2.00: revalidation failed (errno=-5) Jun 8 19:32:36 zowie kernel: ata2.00: disabled Jun 8 19:32:36 zowie kernel: ata2.00: device reported invalid CHS sector 0 Jun 8 19:32:36 zowie kernel: ata2.00: device reported invalid CHS sector 0 Jun 8 19:32:36 zowie kernel: ata2.00: device reported invalid CHS sector 0 Jun 8 19:32:36 zowie kernel: ata2.00: device reported invalid CHS sector 0
The drive goes into a read only state at this point.
It does not matter what drive I put on the controller. The controller has been replaced once already.
Double-plus ungood.
| |