lkml.org 
[lkml]   [2010]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [2.6.35-rc1 regression] tg3 vpd r/w failed
On Tue, Jun 01, 2010 at 03:32:09PM -0700, David Miller wrote:
>
> Mikael I'm getting tired of continuing to add the proper
> mailing list CC: for your sparc bug reports. Please make
> sure to add sparclinux@vger.kernel.org to your reports
> in the future.
>
> Thanks.
>
> > Booting 2.6.35-rc1 on a Sun Blade 2500 Red with builtin tg3 I get:
> >
> > tg3.c:v3.110 (April 9, 2010)
> > PCI: Enabling device: (0000:00:03.0), cmd 2
> > ...
> > tg3 0000:00:03.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
> > tg3 0000:00:03.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
> > tg3 0000:00:03.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
> > tg3 0000:00:03.0: eth0: Tigon3 [partno(none) rev 1002] (PCI:66MHz:64-bit) MAC address ...
> > tg3 0000:00:03.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
> > tg3 0000:00:03.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
> > tg3 0000:00:03.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
> > ...
> > tg3 0000:00:03.0: eth0: No firmware running
> > tg3 0000:00:03.0: eth0: Link is up at 100 Mbps, full duplex
> > tg3 0000:00:03.0: eth0: Flow control is on for TX and on for RX
> >
> > The three 'vpd r/w failed' messages are new and did not occur with 2.6.34
> > or earlier kernels.

These messages are originating from the PCI layer. It looks like your
device does not have NVRAM, which is a known issue. I have an idea on
how to reduce the noise, but let me investigate it a little more before
I commit to it.



\
 
 \ /
  Last update: 2010-06-02 01:31    [W:2.964 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site